检测活性氧的荧光探针新进展

活性氧对于人体是十分重要的。然而,过量的活性氧是相当有害的,它们会对人体产生氧化损伤,导致细胞死亡。活性氧现在已经引起了化学、生物、医药等多个领域学者的浓厚兴趣,它们被认为和多种病理条件有密切的联系。由于活性氧寿命短、反应活性高,并且大部分都存在于体内很难被捕获,因此它们的分析测定是一项国际性难题。荧光探针作为活性氧的高灵敏的检测分析物,已经得到越来越广泛和深入的研究。由于每一种活性氧都有它独特的生理学活性,因此设计高选择性的,能够检测具体一种活性氧的荧光探针分子就显得十分重要。本文主要对近三年来检测单线态氧、过氧化氢、超氧阴离子和羟自由基这四种活性氧的荧光探针的研究进展进行综述,关注这类荧光探针的检测机理以及具体应用。     

One-pot Synthesis of 1,8-Dioxo-decahydroacridine Derivatives in Aqueous Media

A new and efficient method for the synthesis of 1,8‐dioxo‐9‐aryl‐decahydroacridine derivatives was developed via a one‐pot three component reaction of dimedone, aromatic aldehydes and ammonium acetate in the presence of ammonium chloride, or Zn(OAc)₂·2H₂O or L‐proline separately in water in the short period of time and high yields.     

The influence of nano-particle tracers on the slip length measurements by microPTV

Direct measurement of slip length is based on the measured fluid velocity near solid boundary. However, previous micro particle image velocimetry/particle tracking velocimetry (microPIV/PTV) measurements have reported surprisingly large measured near-wall velocities of pressure-driven flow in apparent contradiction with the no-slip hy-pothesis and experimental results from other techniques. To better interpret the measured results of the microPIV/PTV, we performed velocity profile measurements near a hy-drophilic wall (z = 0.25-1.5 μm) with two sizes of tracer particles (φ 50 nm and φ200 nm). The experimental results indicate that, at less than 1 μm from the wall, the deviations between the measured velocities and no-slip theoretical values obviously decrease from 93% of φ200 nm particles to 48% of φ50 nm particles. The Boltzmann-like exponential measured particle concentrations near wall were found. Based on the non linear Boltzmann distribution of particle concentration and the effective focus plane thickness, we illustrated the reason of the apparent velocity increase near wall and proposed a method to correct the measured velocity profile. By this method, the deviations between the corrected measured velocities and the no-slip theoretical velocity decrease from 45.8% to 10%, and the measured slip length on hy-drophilic glass is revised from 75 nm to 16 nm. These results indicated that the particle size and the biased particle concentration distribution can significantly affect near wall velocity measurement via microPIV/PTV, and result in larger measured velocity and slip length close to wall.     

Effect of an adverse pressure gradient on the streamwise Reynolds stress profile maxima in a turbulent boundary layer

It is widely accepted that in a turbulent boundary layer （TBL） with adverse pressure gradient （APG） an outer peak usually appears in the profile of streamwise Reynolds stress. However, the effect of APG on this outer peak is not clearly understood. In this paper, the effect of APG is analysed using the numerical and experimental results in the literature. Because the effect of upstream flow is inherent in the TBL, we first analyse this effect in TBLs with zero pressure gradient on flat plates. Under the individual effect of upstream flow, an outer peak already appears in the profile of streamwise Reynolds stress when the TBL continues developing in the streamwise direction. The APG accelerates the appearance of the outer peak, instead of being a trigger.     

Numerical modeling and simulation of PEM fuel cells: Progress and perspective

This paper provides a comprehensive review on the research and development in multi-scale numerical modeling and simulation of PEM fuel cells. An overview of recent progress in PEM fuel cell modeling has been provided. Fundamental transport phenomena in PEM fuel cells and the corresponding mathematical formulation of macroscale models are analyzed. Various important issues in PEM fuel cell modeling and simulation are examined in detail, including fluid flow and species transport, electron and proton transport, heat transfer and thermal management, liquid water transport and water management, transient response behaviors, and cold-start processes. Key areas for further improvements have also been discussed.     

Effect of particle size distribution on particle based composite anode models

Particle based models of composite anodes are useful tools for exploring the behavior of SOFC systems. As part of our efforts to develop models for understanding fuel cells, we have been building models of Ni-YSZ composite anodes using experimentally measured particle size distributions. The objectives of this study were to characterize the percolation threshold and conductivity of these models in comparison to simpler mono dispersed and biphasic particle size distributions from the literature. We found that the average values for the onset of percolation and the measured conductivity of the models with experimentally measured particle size distributions are similar to those for the simple distributions and the experimentally measured distributions. For all of the configurations evaluated, the onset of percolation in the Nickel phase occurred at a solid fraction of Nickel between 20% and 25%. This corresponded almost exactly to the point at which the coordination number between Nickel phase particles reached 2.2. The significant finding was that the variation in the value for the conductivity, as measured by the standard deviation of the results, was several orders of magnitude higher than for the simpler systems. We explored the validity of our assumptions, specifically the assumption of random particle placement, by building a particle model directly from FIB-SEM data. In this reconstruction, it was clear that the location of particles was not random. Particles of the same type and size had much likelihood of contact higher than would indicated by random location.     

Strong dependency of lithium diffusion on mechanical constraints in high-capacity Li-ion battery electrodes

The effect of external constraints on Li diffusion in high-capacity Li-ion battery electrodes is investigated us- ing a coupled finite deformation theory. It is found that thin- film electrodes on rigid substrates experience much slower diffusion rates compared with free-standing films with the same material properties and geometric dimensions. More importantly, the study reveals that mechanical driving forces tend to retard diffusion in highly-constrained thin films when lithiation-induced softening is considered, in contrast to the fact that mechanical driving forces always enhance diffusion when deformation is fully elastic. The results provide further proof that nano-particles are a better design option for next-generation alloy-based electrodes compared with thin films.     

A three-layer structure model for the effect of a soft middle layer on Love waves propagating in layered piezoelectric systems

A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with "soft" implying that the bulk-shear-wave velocity of the middle layer is smaller than that of the upper sensitive layer. Dispersion equations are obtained for unelectroded and traction-free upper surfaces which, in the limit, can be reduced to those for classical Love waves. Systematic parametric studies are subsequently carried out to quantify the effects of the soft middle layer upon Love wave propagation, including its thickness, mass density, dielectric constant and elastic coefficient. It is demonstrated that whilst the thickness and elastic coefficient of the middle layer affect significantly Love wave propagation, its mass density and dielectric constant have negligible influence. On condition that both the thickness and elastic coefficient of the middle layer are vanishingly small so that it degenerates into an imperfectly bonded interface, the three-layer model is also employed to investigate the influence of imperfect interfaces on Love waves propagating in piezoelectric layer/elastic substrate systems. Upon comparing with the predictions obtained by employing the traditional shear-lag model, the present three-layer structure model is found to be more accurate as it avoids the unrealistic displacement discontinuity across imperfectly bonded interfaces assumed by the shearlag model, especially for long waves when the piezoelectric layer is relatively thin.     

Experimental analysis of crack tip fields in rubber materials under large deformation

A three-nested-deformation model is proposed to describe crack-tip fields in rubber-like materials with large deformation.The model is inspired by the distribution of the measured in-plane and out-of-plane deformation.The inplane displacement of crack-tip fields under both Mode I and mixed-mode(Mode I-II) fracture conditions is measured by using the digital Moire’ method.The deformation characteristics and experimental sector division mode are investigated by comparing the measured displacement fields under different fracture modes.The out-of-plane displacement field near the crack tip is measured using the three-dimensional digital speckle correlation method.     

A hybrid vertex-centered finite volume/element method for viscous incompressible flows on non-staggered unstructured meshes

This paper proposes a hybrid vertex-centered finite volume/finite element method for solution of the two dimensional (2D) incompressible Navier-Stokes equations on unstructured grids.An incremental pressure fractional step method is adopted to handle the velocity-pressure coupling.The velocity and the pressure are collocated at the node of the vertex-centered control volume which is formed by joining the centroid of cells sharing the common vertex.For the temporal integration of the momentum equations,an implicit second-order scheme is utilized to enhance the computational stability and eliminate the time step limit due to the diffusion term.The momentum equations are discretized by the vertex-centered finite volume method (FVM) and the pressure Poisson equation is solved by the Galerkin finite element method (FEM).The momentum interpolation is used to damp out the spurious pressure wiggles.The test case with analytical solutions demonstrates second-order accuracy of the current hybrid scheme in time and space for both velocity and pressure.The classic test cases,the lid-driven cavity flow,the skew cavity flow and the backward-facing step flow,show that numerical results are in good agreement with the published benchmark solutions.