Photochemical degradation of hyaluronic acid by singlet oxygen

Changes of the rheological properties of hyaluronic acid (sodium-magnesium salt) solutions after exposure to UV radiation indicate a vigorous decrease in their viscosity, but its still strong shear rate dependence. Whereas the presence of the singlet oxygen sensitizer (anthracene-1-sulphonic acid) brings about a loss of shear dependence; the studied solutions show newtonian behavior.     

Poly(styrene-b-2-vinylpyridine-1-oxide) diblock copolymers: 3. Microemulsions in water/propan-2-ol/toluene mixtures

Pseudo-ternary phase diagrams have been constructed for the three-component solvent system (toluene+water+propan-2-ol) containing diblock copolymers of poly(styrene-b-2-vinylpyridine-1-oxide). Microemulsions have been shown to form on the water-rich side of the phase diagram, in the region of the phase boundary without polymer. Dynamic light-scattering experiments have led to droplet size values in the region of 100 nm, with the size depending strongly on the propan-2-ol/water concentration, as well as the amount of solubilised toluene in the core. Viscometry experiments have been carried out to measure polymer aggregation numbers in the microemulsion droplets, and interfacial tension measurements have shown that in the absence of propan-2-ol (effectively a cosurfactant) the limiting value of the oil/water interfacial tension, even an saturation adsorption of the copolymer is 20 mNm^–1. However, addition of propan-2-ol reduces the interfacial tension to the very low values generall commensurate with microemulsion formation.     

Synthesis and Some Chemical Behaviour of Certain Substituted Thiosemicarbazides

Three new thiosemicarbazides (1 a-c ) were prepared from N-[4-phenyl-5-(2-thienyl)-1,2,4-triazol-3-yl]mercaptoacetohydrazide. Reaction of (1 a-c) with the appropriate phenacyl bromide afforded thiazoline derivatives (2 a-i) whereas their reaction with chloroacetic acid or maleic anhydride gave the corresponding thiazolidine derivatives (3 a,b) and (4 a,b) . Cyclodesulfurization of (1 a-c) with DCCD in toluene yielded 5-substituted-amino-1,3,4-oxadiazoles (5 a,b) , while their dehydration with PPA gave the corresponding 5-substituted-amino-1,3,4-thiadiazoles (6 a-c) . Six representative compounds were tested for their in-vitro antimicrobial activity against some pathogenic microorganisms, some of them were proved to be active.     

Molecular structures of β-amino-α-bromovinyl trifluoromethyl ketones

The molecular structures of β-amino-α-bromovinyl trifluoromethyl ketones was studied by UV, IR, ¹H, ¹³C, and ¹⁵N NMR spectroscopy and using the density functional (B3LYP/6-31G(d,p) and PBE/QZ3P) and ab initio riMP2/cc-pVTZm quantum-chemical calculations. Factors affecting stabilization of the EZE-conformation of the molecules, which is atypical of analogous unsubstituted amino enones, are considered.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 102–106, January, 2005.     

Synthesis and investigation of mono- and binuclear cyano-bridged complexes of rhodium,ruthenium, and palladium

Binuclear Rh^III and Ru^II complexes of the [M¹-CN-M²]⁺BF ₄ ^– (M¹ and/or M² are (⁵-Cp)(³-C₃H₅)Rh and (⁶-C₆H₆)(³-C₃H₅)Ru) type, heteronuclear organometallic compound (⁵-Cp)(³-C₃H₅)RhCNPd(³-C₃H₅)Cl, and mononuclear Rh^III and Ru^II complexes [(³-C₃H₅)LM(MeCN)]⁺ _BF4 ^– (M = Rh, L = ⁵-Cp; M = Ru, L = ⁶-C₆H₆) were synthesized. An electrochemical study of these compounds in solutions demonstrates that the bond between the bridged CN ligand and the metal atoms is rather strong, and there is no dissociation into mononuclear fragments in solutions. The kinetics of the reaction of [(⁵-Cp)(³-C₃H₅)Rh(MeCN)]⁺ _BF4 ^– with halide ions was studied by electrochemical methods. The ligand exchange proceeds by a bimolecular dissociative-exchange mechanism.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 968–973, May, 1995.     

Partial molal volumes of ions in organic solvents from ultrasonic vibration potential and density measurements. III. Dimethylsulfoxide

The partial molal volumes of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Cl^–, Br^–, I^–, and NO ₃ ^- in DMSO at 25°C have been determined from ultrasonic vibration potential data and density data for solutions of uni-univalent electrolytes. Hepler's semiemprirical equation has been used to split ionic partial molal volumes into geometric and electrostrictive contributions. The results obtained in this work confirm the conclusion of our previous studies, namely, that the contribution of electrostriction is essentially determined by the properties of that layer of atoms, 0.3 to 0.4 nm thick, in contact with the ion and by the degree of steric hindrance of the poles of the dipole of the solvent molecule. On the other hand, the geometric contribution depends on the size of the solvent molecule and also on the arrangement of the solvent molecules about the ions. It is shown that the geometric contribution to the partial molal volume of ions is largely increased when ions cannot come close enough to the poles of the solvent-molecule dipole, owing to steric hindrance.     

Use of 1-alkyl-3-methylimidazolium hexafluorophosphate room temperature ionic liquids as chelate extraction solvent with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione

Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm⁻³ nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)₂(H₂O)_n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)₃⁻ for M = Mn, Co, Zn and Cd.     

β-Ketoaldehydes in the synthesis of 6-alkyl-3-cyano-2(1H)-pyridinethiones

An efficient synthesis of 6-alkyl-3-cyano-2(1H)-pyridinethiones by the reactions of the sodium salts of -ketoaldehydes with cyanothioacetamide was developed. Pyridinethiones undergo selectiveS-alkylation with haloacetonitriles and haloacetophenones followed by cyclization to the corresponding thieno[2,3-b]pyridines.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 727–731, April, 1995.This study was financially supported by the Russian Foundation for Basic Research (Project No. 94-03-08-823).     

Cyclic voltammograms of iron and C-steels in oxalic acid solutions and investigation of the effect of phenyl phthalimide as corrosion inhibitors

Summary The electrochemical behaviour of Fe and C-steel samples in oxalic acid solutions was studied by the use of cyclic voltammetry. Two peaks were observed; the first one was the anodic peak and the second one an unexpected reductive dissolution peak which could be observed in the cathodic branch of cyclic voltammograms of all electrodes studied. The carbon content was found to increase the active dissolution of steels and to decrease their tendency towards passivation. The inhibitive efficiency of phenyl phthalimide derivatives on the active dissolution of Fe and steel samples in 0.1M oxalic acid were investigated.

---

Cyclische Voltammogramme von Eisen und C-Stählen in Oxalsäurelösungen und der Einfluß von Phenylphthalimiden als Korrosionsinhibitoren

Zusammenfassung Das elektrochemische Verhalten von Eisen und C-Stählen in Oxalsäurelösungen wurde mit Hilfe cyclischer Voltammetrie studiert. Dabei treten zwei Signale auf: das anodische Signal sowie ein unerwartetes reduktives Lösungssignal. Letzteres wurde im kathodischen Zweig der cyclischen Voltammogramme aller untersuchten Elektroden gefunden. Der Kohlenstoffgehalt erhöht die aktive Auflösung von Stählen und erniedrigt ihre Tendenz zur Passivierung. Die Inhibitionseffizienz von Phenylphthalimiden für die aktive Auflösung von Eisen und Stahlproben in 0.1M Oxalsäure wurde untersucht.

     

Ab initio studies of the protonation of CO,N2 and NO+: Calculation of the minimum energy reaction paths

Ab initio molecular orbital calculations employing a 4-31G basis set have been used to study the minimum energy paths for the formation of HCO⁺, COH⁺, and HCOH²⁺ from CO by protonation. The protonation of N₂ to give NNH⁺ and HNNH²⁺ and of NO⁺ to form HNO²⁺ and NOH²⁺ have also been investigated. All species formed have linear equilibrium geometries and the minimum energy path for approach of the proton is along the line-of-centers of the heavy atoms. Energy barriers to the formation of the various species are given, where appropriate, and changes in geometry, ordering of molecular orbitals and orbital occupancy are discussed.