葡萄糖、果糖和蔗糖在甲酰胺溶液中的体积性质

报导了含葡萄糖、果糖和蔗糖的甲酰胺溶液的密度数据，无限稀释表观摩尔体积和体积第二维里系数．利用改进的定标粒子理论、基团几何模型和基团加合方法，求解了溶质的空腔生成体积，溶质-溶剂间的氢键作用对体积性质的影响，并和水溶液中的情况进行了比较．     

与色散介质毗邻的一维半无限光子晶体表面态

运用Bloch定理和传输矩阵方法,研究了与色散介质毗邻的由两种材料组成的半无限一维光子晶体局域表面态的电场和色散关系.和以空气为背景的一维光子晶体相比,毗邻色散介质的光子晶体表面模色散曲线在一定堆积次序下会在较低的带隙中发生断开,较高带隙中的表面模群速度在不同堆积次序下会有很大差异.当与色散介质毗邻的物质折射率较大时,较高带隙中的表面模群速度较小;与色散介质毗邻的物质折射率较小时,较高带隙中表面模的群速度较大.     

1H NMR和GC-MS法分析表征煤液化油

采用经典柱色谱法对煤液化循环油和“加氢”后的循环油进行族组成分离,将其分离成饱和烃、芳香烃和极性物3个组分,并用核磁共振波谱仪对各个组分进行定性分析,同时用气质联用分析方法初步确定了饱和烃和芳香烃两个馏分的主要物质组成。结果表明:循环油饱和烃部分主要由C12~C27直链烷烃组成,芳香烃部分主要组成是烷基取代的氢化单环芳烃及少量的多环芳烃。而循环油经420℃“加氢”后饱和烃部分除了含C12~C27的直链烷烃,还有一些直链烷烃的异构体和环烷烃,芳香烃部分主要是双环、三环、四环芳烃,单环芳烃则完全消失。     

基于熵的群决策专家选择研究

群决策是研究多人如何做出统一的有效抉择.在群决策中专家决策水平直接反应到决策结论上,是影响事业的成败关键,因此专家的选择对于群决策而言是至关重要的.建立了评价群决策专家的指标集,从专家选择角度定义了理想专家,给出了专家选择的熵模型,并通过一个例子说明该模型的有效性.     

应用相敏光放大器的非零色散位移光纤通信系统中的ISI限制距离研究

本文分析了1.55μm信号波长,采用强度调制/直接检测(IM/DD)方式的单信道级联相敏光放大器(PSA)非零色散位移光纤传输系统的性能.应用非线性薛定谔方程(NLSE),通过对信号传输后眼图劣化度的计算,得到了光纤传输系统的码间干扰(ISI)限制距离.由于PSA的相敏特性,其对光纤色散具有一定的补偿作用,因此级联相敏光放大器光纤通信系统可以实现信号高比特率长距离传输.然而,随着信号速率的提高,对长距离传输,必须减小光纤色散值和PSA的间距.当光纤色散值大到一定程度,要进行信号的高速率传输,就必须附加其它的色散补偿方法.     

成组设计在高功率激光装置中的应用

在高功率激光装置研制中首次引入成组技术概念,并以空间滤波器为例论证了在高功率激光装置的器件研制过程中实施成组设计的必要性和可行性最后讨论了计算机辅助成组设计系统(GTCAD)的组成和在高功率激光装置中具体实施过程.     

An improved partial SPIHT with classified weighted rate-distortion optimization for interferential multispectral image compression

Based on the property analysis of interferential multispectral images, a novel compression algorithm of partial set partitioning in hierarchical trees (SPIHT) with classified weighted rate-distortion optimization is presented.After wavelet decomposition, partial SPIHT is applied to each zero tree independently by adaptively selecting one of three coding modes according to the probability of the significant coefficients in each bitplane.Meanwhile the interferential multispectral image is partitioned into two kinds of regions in terms of luminous intensity, and the rate-distortion slopes of zero trees are then lifted with classified weights according to their distortion contribution to the constructed spectrum.Finally a global ratedistortion optimization truncation is performed.Compared with the conventional methods, the proposed algorithm not only improves the performance in spatial domain but also reduces the distortion in spectral domain.     

A Germylene Supported by Two 2-Pyrrolylphosphane Groups as Precursor to PGeP Pincer Square-Planar Group 10 Metal(II) and T-Shaped Gold(I) Complexes

An efficient synthesis of 2-di-tert-butylphosphanylmethylpyrrole (HpyrmPtBu₂), by treating 2-dimethylaminomethylpyrrole (HpyrmNMe₂) with tBu₂PH at 135 °C in the absence of any solvent, has allowed the preparation of the new PGeP germylene Ge(pyrmPtBu₂)₂ ( 1 ), by treating [GeCl₂(dioxane)] with LipyrmPtBu₂, in which the Ge atom is stabilized by intramolecular interactions with one (solid state) or both (solution) of its phosphane groups. Reactions of germylene 1 with Group 10 metal dichlorido complexes containing easily displaceable ligands have led to [MCl{κ³P,Ge,P-GeCl(pyrmPtBu₂)₂}] [M=Ni ( 2 ), Pd ( 3 ), Pt ( 4 )], which have an unflawed square-planar metal environment. Treatment of germylene 1 with [AuCl(tht)] (tht=tetrahydrothiophene) rendered [Au{κ³P,Ge,P-GeCl(pyrmPtBu₂)₂}] ( 5 ), which is a rare case of a T-shaped gold(I) complex. The hydrolysis of 5 gave the linear gold(I) derivative [Au(κP-HpyrmPtBu₂)₂]Cl ( 6 ). Complexes 2 – 5 contain a PGeP pincer chloridogermyl ligand that arises from the insertion of the Ge atom of germylene 1 into a M−Cl bond of the corresponding metal reagent. The bonding in these molecules has been studied by DFT/NBO/QTAIM calculations. These results demonstrate that the great flexibility of germylene 1 makes it a better precursor to PGeP pincer complexes than the previously known germylenes of this type.     

Functionally separable solutions to nonlinear wave equations by group foliation method

We apply functional separation of variables within the approach of the group foliation method to the nonlinear wave equation with variable speed and external force: utt=A(x)(Dx(u)ux)+B(x)Q(u), Ax≠0. A classification of these equations admitting functionally separable solutions is performed and the resulting solutions are obtained in explicit form in many cases.     

Rough set based rule induction from two decision tables

We study rule induction from two decision tables as a basis of rough set analysis of more than one decision tables. We regard the rule induction process as enumerating minimal conditions satisfied with positive examples but unsatisfied with negative examples and/or with negative decision rules. From this point of view, we show that seven kinds of rule induction are conceivable for a single decision table. We point out that the set of all decision rules from two decision tables can be split in two levels: a first level decision rule is positively supported by a decision table and does not have any conflict with the other decision table and a second level decision rule is positively supported by both decision tables. To each level, we propose rule induction methods based on decision matrices. Through the discussions, we demonstrate that many kinds of rule induction are conceivable.