Intercalation compounds of trimethylphosphate in graphitic oxide

The intercalation compounds of trimethylphosphate (TMP) in graphite oxide (GO) have been synthezized. Two compounds have been characterized, corresponding to intercalation of one or two molecules of TMP, and have been characterized by gravimetric adsorption, X-ray diffraction and infrared spectroscopy. Bonding between TMP and graphitic oxide takes place through hydrogen bonding with OH groups of the layered material.     

Sol-Gel Synthesis and Microstructural Characterization of Silicon Oxycarbide Glass Sheets with High Fracture Strength and High Modulus

A synthesis route to silicon oxycarbide glass sheets (thickness 40 to 1000 m and area up to 20 × 35 cm2) has been developed for the first time starting from a methyl modified sol containing nano-particulate SiO2 and having a solid content of 70 wt%. The gel sheets obtained by casting and drying of this sol were sintered in N2 atmosphere at temperatures between 900–1650°C. Only by the incorporation of colloidal silica (0.10–0.35 mole per mole alkoxide) to the sol could crack-free, large area glass sheets be obtained. Fracture strength (three point bending) was found to attain a maximum (200–300 MPa) for the sheets sintered at 1000°C. Young's modulus attained a peak value between 120 and 130 GPa for the sheets sintered at 1200°C. HR-TEM studies showed an amorphous and homogeneous matrix up to a sintering temperature of 1200°C, whereas at 1450°C and 1650°C, crystallites of SiC and lamellar graphite were formed. It is concluded that addition of colloidal silica to the sol does not lead to inhomogeneities after sintering and therefore does not decrease the strength and elastic modulus.     

PLANAR LIQUID SHEETS AT LOW REYNOLDS NUMBERS

Asymptotic methods are employed to derive the leading-order equations which govern the fluid dynamics of time-dependent, incompressible, planar liquid sheets at low Reynolds numbers using as small parameter the slenderness ratio. Analytical and numerical solutions of relevance to both steady film casting processes and plane stagnation flows are obtained with the leading-order equations. It is shown that for steady film casting processes the model which accounts for both gravity and low-Reynolds-number effects predicts thicker and slower planar liquid sheets than those which neglect a surface curvature term or assume that Reynolds number is zero, because the neglect of the curvature term and the assumption of zero Reynolds number are not justified at high take-up velocities owing to the large velocity gradients that occur at the take-up point. It is also shown that for Reynolds number/Froude number ratios larger than one, models which neglect the surface curvature or assume a zero Reynolds number predict velocity profiles which are either concave or exhibit an inflection point, whereas the model which accounts for both curvature and low-Reynolds-number effects predicts convex velocity profiles. For plane stagnation flows it is shown that models which account for both low-Reynolds-number and curvature effects predict nearly identical results to those of models which assume zero Reynolds number. These two models also predict a faster thickening of the planar liquid sheet than models which account for low- Reynolds-number effects but neglect the surface curvature. This curvature term is very large near the stagnation point and cannot be neglected there. It is also shown that the thickening of the sheet occurs closer to the stagnation point as the Reynolds number/Froude number ratio is increased, i.e. as the magnitude of the gravitational acceleration is increased. In addition it is shown that large surface tension introduces a third-order spatial derivative in the axial momentum equation at leading order.     

前驱体改性法制备薄层多孔富氨基的石墨相氮化碳用于光催化降解RhB和光催化制氢

半导体光催化是一种利用半导体将太阳能转换为高能化学能的绿色技术,在可再生清洁能源生产和污染物修复领域有着巨大的应用前景.石墨相氮化碳(g-C3N4)作为一种环境友好的非金属半导体,因其制备工艺简单、来源丰富、热稳定性和化学稳定性好、可见光吸收范围及特殊的电子性能而受到广泛关注.但一般常用氮源前驱体如二氰二胺、三聚氰胺等...     

Sonochemical synthesis of graphitic carbon nitrides‐wrapped bimetal oxide nanoparticles hybrid materials and their electrocatalytic activity for xanthine electro-oxidation

A novel network-like magnetic nanoparticle was fabricated on a graphitic carbon nitride through a facile sonochemical route at frequency 20 kHz and power 70 W. To enhance the electrocatalytic activity of the modified materials, the graphitic carbon nitrides (g-C₃N₄) was prepared from melamine. Monitoring of xanthine concentration level in biological fluids is more important for clinical diagnosis and medical applications. As modified CuFe₂O₄/g-C₃N₄ nanocomposite exhibits better electrochemical activity towards the oxidation of xanthine with higher anodic current compared to other modified and unmodified electrode for the detection of xanthine with larger linear range (0.03–695 µM) and lower limit of detection (13.2 nM). To compare with these methods, the electrochemical techniques may be an alternative high sensitive method due to their simplicity and rapid detection time. In addition, the practical feasibility of the sensor was inspected with biological samples, reveals the acceptable recovery of the sensor in real samples.     

溶剂热后处理对石墨相氮化碳光化学固氮产氨性能的影响

In this work, graphitic carbon nitride (g-C₃N₄) with large surface area and many nitrogen vacancies was synthesized by introducing ionic liquid[Bmim]Br as a solvent into the solvothermal post-treatment. X-ray diffraction (XRD), N₂ adsorption, scanning electron microscopy (SEM), UV-Vis spectroscopy, X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), temperature-programmed desorption of N₂ (N₂-TPD), and photoluminescence (PL) spectroscopy were used to characterize the prepared catalysts. The morphology of the as-prepared g-C₃N₄ was markedly changed from an orderless layered structure to nanoparticles with a uniform size distribution of around 30-40 nm after the introduction of[Bmim]Br, leading an increase in surface area from 8.6 to 37.9 m²·g^-1. N₂-TPD, photoluminescence spectra, and density functional theory (DFT) simulations indicated that the nitrogen vacancies not only trapped the photogenerated electrons to enhance their separation rate, but also served as active sites for the adsorption and activation of N₂ molecules. The increased surface area of the as-prepared g-C₃N₄ meant that more nitrogen vacancies were exposed on the surface, leading to a markedly promoted nitrogen photofixation ability. The possible reaction mechanism is proposed.     

介质阻挡放电等离子体法制备优异光催化合成过氧化氢性能的氮空穴掺杂石墨相氮化碳（英文）

过氧化氢(H_2O_2)是一种绿色氧化剂,广泛应用于纺织、印染、造纸和医药等行业.目前,工业上采用蒽醌法制备H_2O_2,它由于需要多步加氢和氧化处理,因此能耗非常大.研究发现,采用贵金属催化剂可以将氢气和氧气直接合成H2O2,但催化剂价格过高,且反应本身存在爆炸风险.近年来,半导体光催化合成H_2O_2受到广泛关注.研究发现,在水存在下,光电子可以将氧气还原得到H_2O_2.介质阻挡放电(DBD)等离子体广泛应用于材料合成、挥发性有机物处理、汽车尾气净化和材料表面处理等.石墨相氮化碳(g-C_3N_4)是新型非金属光催化剂,以其性质稳定、能带适中和制备方便等优点而广受青睐.然而g-C_3N_4的比表面积和电荷分离效率较低,大大限制了其应用.本文采用DBD等离子体法在氢气气氛下制备了N空穴掺杂的石墨相氮化碳,采用XRD,N_2吸附,UV-Vis,SEM,TEM,XPS,EIS,EPR,O_2-TPD及PL等方法对催化剂进行了表征,并考察了N空穴对催化剂结构性质、光学性质及光催化合成H_2O_2性能的影响.结果显示,当DBD等离子体处理时间小于30 min时,所制催化剂颗粒尺寸显著小于焙烧法得到的,因而其比表面积显著提高.N空穴的引入降低了催化剂的能带,提高了可见光区的吸收.此外,N空穴作为反应活性位,既能吸附反应物氧气分子,又能捕获光电子并促进光电子从催化剂向氧气分子转移,进而发生后续还原反应.等离子体处理30 min得到的催化剂光催化合成H_2O_2性能最佳,是纯g-C_3N_4的11倍.本文为g-C_3N_4基催化剂的制备提供了一个新方法.     

Ag/Ag3PO4/g-C3N4三元复合光催化剂的制备及其可见光驱动下的光催化活性增强

报道了一种新型Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂的制备及其半导体界面处的快速载流子分离所引起的光催化活性的显著增强效应。通过X射线衍射,扫描电子显微镜,紫外-可见吸收光谱以及光致发光光谱等就其晶体结构、形貌、组分、光学吸收以及载流子的快速分离行为进行了表征与分析。以罗丹明B作为模型化合物分子,研究发现,所制备的Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂在可见光照射下表现出比Ag₃PO₄以及Ag₃PO₄/g-C₃N₄二元催化剂更为优异的光催化活性。研究认为,Ag₃PO₄表面尺寸约为40 nm的Ag纳米粒子在可见光下受激所产生的等离子表面共振效应以及Ag₃PO₄与g-C₃N₄界面处所形成的类似异质结结构对所制备的Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂光催化活性的显著增强起到重要作用。     

Specific features of laser cutting of steel sheets and monitoring of sample quality after laser influence

An automated laser system with an 8-kW quantum generator with the beam quality not worse than that of a single-mode laser is described. The possibility of using such a system in procurement production for cutting carbon and stainless steel sheets is demonstrated. The quality control of the blank material shows that the properties of the latter satisfy appropriate standards. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 4, pp. 176–184, July–August, 2006.     

Vortex sheets with reflection symmetry in exterior domains

In this paper we prove the existence of a weak solution of the incompressible 2D Euler equations in the exterior of a reflection symmetric smooth bluff body with symmetric initial flow corresponding to vortex sheet type data whose vorticity is of distinguished sign on each side of the symmetry axis. This work extends the results proved for full plane flow by the authors in [M.C. Lopes Filho, H.J. Nussenzveig Lopes, Z. Xin, Existence of vortex sheets with reflection symmetry in two space dimensions, Arch. Ration. Mech. Anal. 158 (3) (2001) 235-257].