Mixed convection unsteady stagnation point flow over a stretching sheet with heat transfer in the presence of variable free stream

An analysis is performed for the unsteady mixed convection flow of an incompressible viscous fluid about a stagnation point on a stretching sheet in the presence of a variable free stream. The equations of motion and energy are transformed into the ordinary differential equations by using similarity transformations. Homotopy analysis method is used for the solution of the governing problem. The results have been discussed by plots. The present values of the function are shown very close to the previous limiting solutions. Copyright © 2011 John Wiley & Sons, Ltd.     

Optical extensometer and elimination of the effect of out-of-plane motions

A novel optical extensometer is developed to estimate the local uniform strain on planar surface accurately. The proposed system consists of a shared large format lens and two image sensors, which acquire pairs of images of two isolated small regions on the object surface simultaneously. Digital image correlation (DIC) algorithm is applied to determine the relative displacement between gauge points designated on recorded pairs of images. Then local strain can be extracted after dividing the relative displacement by the scale distance. Moreover, a special experimental setup called “correction sheet” is used to eliminate the virtual strain induced by out-of-plane motions. Uni-axial tensile experiments are performed to validate the reliability and resolution of the optical extensometer, and the measurement results demonstrate that the resolution of the optical extensometer achieves 2–3 με.     

高分子模板调控不同形貌氧化亚铜的仿生合成

采用聚丙烯酰胺(PAM)为软模板,在CuSO4、Na2SO3体系中调控合成了片状、海胆状、一维线、针状聚集体氧化亚铜晶体。研究了不同浓度Cu2+、不同PAM含量及不同温度对晶体生长的影响。结果表明,PAM促使氧化亚铜异相成核,氧化亚铜形貌随PAM质量分数的变化而变化:当c(Cu2+)=0.5mol.L-1时,PAM质量分数为3.0%(常温引入体系),产物主要为片状晶体;PAM质量分数为1.0%、3.0%时(高温引入体系),分别获得一维线状、海胆状晶体;当Cu2+浓度为0.1 mol.L-1时,体系中高温引入质量分数3.0%的PAM,得到片层状晶体;当Cu2+浓度为0.3、0.4 mol.L-1时,得到针状聚集体氧化亚铜晶体。分别用X射线粉末衍射、冷场发射扫描电子显微镜和激光粒度仪对所制备的产品进行了表征。     

惰性盐辅助合成介孔石墨化碳片及其电容性能

以惰性盐KCl为模板、硝酸镍为金属催化剂镍源、葡萄糖为碳源,通过碳化处理制备了介孔石墨化碳片。利用扫描电子显微镜、透射电子显微镜、X-射线衍射仪和比表面测试仪对介孔石墨化碳片进行了表征。探讨了碳片形成的机理,采用三电极测试体系研究了介孔石墨化碳片电极材料的电化学性能。结果表明,10 g KCl制备的碳片比表面积最大(989 m2·g-1),在6 mol·L-1KOH电解液中,当电流密度为0.5 A·g-1时,比电容达到180 F·g-1;当电流密度达到10 A·g-1时,比电容维持在148 F·g-1,显示了电极具有较好的倍率性能;在10 A·g-1条件下,2 000次循环充放电测试后电容没有发生衰减,展示了在超级电容器方面的应用潜力。     

教学评一致性视域下金属单元复习课的实践*

分析金属知识在中考和教材中的地位,针对当前单元复习教学中存在的问题,依据教学评一致性原则,将“金属知识”的单元复习在“订书钉”为主要线索的探究活动中展开,以此激发学生的学习兴趣,优化学生单元知识结构,发展学生分析问题、解决问题的能力,同时提高学生对学科价值的认识。     

TracePro在“光的偏振实验”中的应用

为提高光的偏振实验教学效果和教学质量,在教学中引入专业的光学设计软件--TracePro,利用该软件仿真了光的双折射过程和现象,以及偏振片的原理;建立光的偏振实验系统实体模型,完成光的偏振态判断实验;仿真光通过波片后的偏振态转换现象;验证马吕斯定律,并仿真了多层介质膜对光的分离和旋光现象.结果表明该方法可以提高教学效率,激发学生探索科学的主观能动性,仿真结论与理论推导和实际实验结果一致.     

纳米铜薄膜氧化反应动力学规律研究

研究了140 ℃下纳米尺度Cu薄膜的氧化行为. 采用真空蒸发法以不同沉积速率制备一系列Cu薄膜, 利用原子力显微镜(AFM)观察其微观形貌, 选取形貌良好的Cu薄膜样品. 采用方块电阻和透射光谱两种方法为表征手段, 测量16～22 nm范围内不同厚度Cu薄膜在140 ℃下完全氧化所需要的时间, 得到了Cu薄膜氧化反应的动力学曲线, 并利用X射线衍射(XRD)分析了氧化产物的晶相结构和成分. 结果表明, 纳米尺度下Cu薄膜在140 ℃下氧化反应的动力学表征结果满足特殊的反对数生长规律, 反应产物为Cu₂O.     

Syntheses and Crystal Structures of Two Coordination Polymers with Aromatic Dioxide as Bridge Ligands

Two coordination polymers, namely, two-dimensional complex 1 {[Cu(μ- L)1.5(ClO4)2(H2O)].(H2O)0.5}n (L = pyrazine-1,4-dioxide) and one-dimensional complex 2 [Co(μ-L)Br2(H2O)2]n, have been synthesized with pyrazine-1,4-dioxide as bridging ligands, and their crystal structures were determined by X-ray crystallography. Crystal data for complex 1: monoclinic system, space group C2/c, with a = 23.310(3), b = 12.2338(17), c = 10.6075(15) , β = 110.487(2)°, V = 2833.6(7) 3, Z = 8, C6H9Cl2CuN3O12.5, Mr = 457.60, Dc = 2.145 g/cm3, F(000) = 1832 and μ = 1.998 mm-1; and those for 2: monoclinic system, space group C2/c, with a = 11.012(3), b = 7.483(2), c = 11.451(3) , β = 101.654(4)°, V = 924.2(4) 3, Z = 4, C4H8Br2CoN2O4, Mr = 366.87, Dc = 2.637 g/cm3, F(000) = 700 and μ = 10.487 mm-1. 1 shows a two-dimensional sheet structure on the ac plane through the coordination of μ-L bridging ligands with Cu(II) ions, while 2 displays a zigzag one-dimensional chain along the c axis via the coordination of μ-L bridging ligand with Co(II) ions. Hydrogen bonds in 1 and 2 make the sheets (or chains) connect each other to form a three-dimensional structure.     

石墨烯/硫酸铅复合材料的制备及其在铅酸电池中的电化学性能

利用简单的浸渍法制备了石墨烯/硫酸铅复合材料,使得硫酸铅可以直接用作铅酸电池负极材料。该复合材料分别以100 mA·g^-1、200 mA·g^-1和300 mA·g^-1电流密度放电时,平均放电比容量分别可达到110、94和69 mAh·g^-1,而硫酸铅仅为49、5和0.5 mAh·g^-1,显示出复合材料在高倍率充放电下更好的比容量和再接受充电能力。循环伏安测试表明石墨烯的电容效应随扫描速率增大而增强,同时析氢也变得严重,使得复合材料在充放电过程中充电效率比纯硫酸铅低20%。在充放电过程中,石墨烯能够提高硫酸铅1倍以上的放电容量,并将充电电压提高0.1 V。XRD和SEM结果显示硫酸铅均匀分布在石墨烯片层上,没有出现团聚现象。     

片状云母径厚比表征方法研究

片状材料的径厚比是片状材料的一个重要特征参数。以片状云母为研究对象,引入形状明显区别于片状云母的聚苯乙烯球作为支撑材料。实验结果表明,当云母片与聚苯乙烯球混合质量比为1∶3时,呈竖立取向云母片的数量达到最大值,随机采集200个云母片的长径和厚度,其径厚比的统计样本均值为15.37。支撑材料聚苯乙烯球为片状云母带来大量支撑位点,显著提高片状云母呈竖立取向的概率,能够快速、直观地同时测量云母片的长径和厚度,有效提高云母片径厚比的测量效率和准确性。