反相高效液相色谱法测定Arthrobacter sp.黄嘌呤氧化酶活性

报道了采用反相高效液相色谱法(RP-HPLC)测定节杆菌(Arthrobacter sp.)黄嘌呤氧化酶活性的有效方法. 将酶初提液与含有黄嘌呤的反应体系在37 ℃下反应20 min, 反应终止后通过HPLC测定产物尿酸生成量的变化来分析酶的活性. 通过流动相组成、pH和柱温等分离条件的优化, 确定了最佳的色谱检测条件以NH4H2PO4 (50 mmol/L, pH 7.5)溶液为流动相, 流速1 mL/min, 柱温25 ℃, 检测波长290 nm. 为深入研究微生物细胞内黄嘌呤氧化酶提供了高效检测手段.     

β-环糊精聚合物-二茂铁安培型葡萄糖氧化酶电极

利用 β-环糊精的空穴结构 ,通过主客体化学反应将二茂铁包络在 β-环糊精聚合物的空穴中 ,同时将葡萄糖氧化酶交联在 β-环糊精聚合物上 ,制成对葡萄糖有灵敏响应的生物传感器。循环伏安和安培检测表明包络在 β-环糊精聚合物空穴中的二茂铁更加接近酶的氧化还原中心 ,可以有效地作为葡萄糖氧化酶和玻碳电极之间的电子媒介体 ,葡萄糖浓度在1.0×10-2 ～8.0mmol/L范围内 ,其浓度与电流响应值呈良好的线性关系 ,方法的检出限为2.0×10-3 mmol/L(S/N=3) ,在10s之内达到最大响应的95 %。用该法测定了血清中的葡萄糖含量 ,结果与传统方法吻合。     

基于中空多孔金纳米/石墨烯复合纳米材料的葡萄糖氧化酶直接电化学及其生物传感研究

采用溶液相牺牲模板法制备中空多孔金纳米粒子（HPAuNPs）,并将该材料与还原氧化石墨烯（rGO）复合,用于葡萄糖氧化酶（GOx）在玻碳电极（GCE）表面的有效固定,构建GOx/HPAuNPs/rGO/GCE传感界面。利用扫描和透射电镜、X射线光电子能谱、X射线衍射谱、红外光谱及电化学等方法对材料的形貌与结构,GOx的固定化过程,以及传感器的直接电化学和电催化性能进行表征。结果表明,HPAuNPs和rGO的协同作用能有效促进GOx与电极之间的直接电子转移（DET）。基于GOx/HPAuNPs/rGO/GCE对葡萄糖的良好电催化性能,该方法有效实现了对葡萄糖的高灵敏度检测,其电流响应的线性范围为0.05～7.0 mmol/L,检出限（S/N=3）为16μmol/L。该传感器具有良好的选择性、重现性及稳定性,对实际样品血清中血糖的测定结果令人满意,回收率为98.0%～103%,相对标准偏差不大于5.0%。     

纳米金-还原氧化石墨烯修饰葡萄糖氧化酶传感器的制备及其电流法检测饮料中的葡萄糖

利用纳米金(Au NPs)与还原氧化石墨烯(rGO)复合纳米材料制备了葡萄糖氧化酶生物传感器并用于饮料中葡萄糖含量的检测。将壳聚糖作为还原剂及稳定剂,通过一步法合成了Au NPs-rGO复合材料,并通过物理吸附固定葡萄糖氧化酶(GOx)来制作GOx生物传感器。该传感器在磷酸盐缓冲溶液(0.1 mol/L,p H6.0)中,-0.45 V(vs.Ag/Ag Cl)电位下电流法检测葡萄糖含量,线性检测范围为0.01~0.88 mmol/L,灵敏度为22.54μA·mmol-1·L·cm-2,检出限为1.01μmol/L,且表观米氏常数为0.497 mmol/L。该传感器用于多种饮料中葡萄糖含量的直接检测,结果满意。     

二茂铁功能化Fe3O4/碳纳米管/壳聚糖复合膜葡萄糖生物传感电极的研究

采用交联法制备了羧基二茂铁功能化Fe₃O₄纳米粒子（FMC-AFNPs）复合材料,并将该复合纳米材料与多壁碳纳米管（MWNTs）、壳聚糖（CS）及葡萄糖氧化酶（GOD）混合修饰于自制的磁性玻碳基底(MGC)表面,制备了GOD/FMC-AFNPs/MWNTs/CS复合膜生物传感器电极. 实验结果表明,FMC-AFNPs复合材料有效地克服了二茂铁在电极表面的泄漏,且FMC-AFNPs/MWNTs/CS复合膜良好的生物兼容性较大地改善了固定化GOD的生物活性. MWNTs具有良好的导电性和大比表面积,在修饰膜内可作为电子传递“导线”,极大地促进电极的电子传递速率,提高电极的电催化活性和灵敏度. 该电极的葡萄糖检测的线性范围为1.0×10^-5 ~ 6.0×10^-3 molL^-1,检测限为3.2×10^-6 mmolL^-1（S/N=3）,表观米氏常数为5.03×10^-3 mmolL^-1,且有较好的稳定性和重现性.     

Enzymetically Regulating the Self‐Healing of Protein Hydrogels with High Healing Efficiency

Enzyme‐mediated self‐healing of dynamic covalent bond‐driven protein hydrogels was realized by the synergy of two enzymes, glucose oxidase (GOX) and catalase (CAT). The reversible covalent attachment of glutaraldehyde to lysine residues of GOX, CAT, and bovine serum albumin (BSA) led to the formation and functionalization of the self‐healing protein hydrogel system. The enzyme‐mediated protein hydrogels exhibit excellent self‐healing properties with 100 % recovery. The self‐healing process was reversible and effective with an external glucose stimulus at room temperature.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Glucose-Responsive Monoolein Cubic Phase Containing Glucose Oxidase

Glucose-responsive monoolein (MO) cubic phase was prepared by immobilizing proteinoid composed of Asp and Leu (PAL) and hydrophobically modified glucose oxidase (HmGOD) onto the MO bilayers. The hydrodynamic mean diameter of PAL aggregate in aqueous solution decreased with increasing the pH value. The number of pamitic acid residue per one molecule of HmGOD was determined to be 6.3 by a calorimetric method. HmGOD could acidify glucose solution in a few hours, possibly because it converted glucose to gluconic acid. PAL- and HmGOD-immobilized MO cubic phase was prepared by hydrating MO melt with the mixture aqueous solution of PAL and HmGOD. The cubic phase exhibited its phase transition around 62.5°C, determined by polarizing microscopy. The release of carboxylic fluorescein (CF) from the cubic phase was suppressed when the pH value of release medium decreased, possibly because PAL can aggregate more at a lower pH value. The release was suppressed when glucose concentration increased, possibly because the release medium can be more acidified and PAL will be more aggregated at a higher glucose concentration. The cubic phase could be used as a drug carrier which releases its content in a sustained manner when the glucose concentration is abnormally high.     

纳米颗粒复合材料增强的葡萄糖生物传感器

二氧化硅和金或铂组成的复合纳米颗粒可以大幅度地提高葡萄糖生物传感器的电流响应,其效果明显优于这三种纳米颗粒单独使用时对葡萄糖生物传感器的增强作用。除了具有吸附浓缩效应,吸附定向和量子尺寸颗粒 应外,复合纳米颗粒比单独一种纳米颗粒更易于形成连续势场,降低电子在电极和固定化酶间的迁移阻力,提高电子迁移率,有效地加速了酶的再生过程,因此复合纳米颗粒显著增强了传感器电流响应。     

GpdA-promoter-controlled production of glucose oxidase by recombinant aspergillus niger using nonglucose carbon sources

The gpdA-promoter-controlled exocellular production of glucose oxidase (GOD) by recombinant Aspergillus niger NRRL-3 (GOD3-18) during growth on glucose and nonglucose carbon sources was investigated. Screening of various carbon substrates in shake-flask cultures revealed that exocellular GOD activities were not only obtained on glucose but also during growth on mannose, fructose, and xylose. The performance of A. niger NRRL-3 (GOD3-18) using glucose, fructose, or xylose as carbon substrate was compared in more detail in bioreactor cultures. These studies revealed that gpdA-promoter-controlled GOD synthesis was strictly coupled to cell growth. The gpdA-promoter was most active during growth on glucose. However, the unfavorable rapid GOD-catalyzed transformation of glucose into gluconic acid, a carbon source not supporting further cell growth and GOD production, resulted in low biomass yields and, therefore, reduced the advantageous properties of glucose. The total (endo- and exocellular) specific GOD activities were lowest when growth occurred on fructose (only a third of the activity that was obtained on glucose), whereas utilization of xylose resulted in total specific GOD activities nearly as high as reached during growth on glucose. Also, the portion of GOD excreted into the culture fluid reached similar high levels (≅ 90%) by using either glucose or xylose as substrate, whereas growth on fructose resulted in a more pelleted morphology with more than half the total GOD activity retained in the fungal biomass. Finally, growth on xylose resulted in the highest biomass yield and, consequently, the highest total volumetric GOD activity. These results show that xylose is the most favorable carbon substrate for gpdA-promoter-controlled production of exocellular GOD.