Preparation of Mullite Fibers by the Sol-Gel Method

Mullite fibers were synthesized from an aqueous solution of aluminum isopropoxide, aluminum nitrate and tetraethylorthosilicate by the Sol-Gel method. The starting solution was prepared by adding aluminum isopropoxide and tetraethylorthosilicate simultaneously to an aluminum nitrate aqueous solution. The spinnability of the starting solution was investigated by varying the molar ratio of aluminum isopropoxide/aluminum nitrate in the solution. Gel fibers were obtained from solutions in a composition range of aluminum isopropoxide/aluminum nitrate of 3 to 5. Gels obtained from spinnable solutions appeared to have high homogeneity in the mixing of the Al/Si components, leading to a sharp 980°C exothermic peak in the DTA curve and a mullitization temperature of 1000°C. However, in the case of gels obtained from unspinnable solutions, a small 980°C exothermic peak was detected, and the mullitization temperature was as high as 1200°C, probably due to greater heterogeneity in the mixing of the Al/Si components.     

Characterization of Autocatalytic Reactions in Modified Cellulose/NMMO Solutions by Thermal Analysis and UV/VIS Spectroscopy

The thermal stability of cellulose/N-methylmorpholine-N-oxide (NMMO) solutions were investigated using UV/VIS spectrometry with a temperature programming cuvette and caloric measurements by means of the Systag calorimeter RADEX (mini-autoclave). Both analytical methods allow to characterize the influences of stabilizers and additives. With the temporal course of the optical density, temperature and pressure thermal runaway reactions with gas evolution and accumulation of chromophoric degradation products were recognized. Kinetic model calculations compared with UV/VIS measurements demonstrate the existence of autocatalytic reactions in cellulose/NMMO solutions. Varying the heating rate autocatalysis can be proved by dynamic caloric measurements as well.     

Gel Chromatography

Gel chromatography can be regarded as a network-limited partitioning of substances. The theory of this method and the preparation and properties of various gel systems are reviewed. Optimization of the method is illustrated for the separation of oligomers.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

聚硅烷亚芳弹性体的凝胶渗透色谱测量

用简易GPC柱研究了在未知合适的Mark-Houwink 系数的情况下,通过GPC和特性粘度的数据,同时计算出宽分布硅烷亚芳弹性体聚合物的分子量和这种类型聚合物的 Mark-Houwink 系数的方法。装柱填料为多孔硅胶球,理论塔板数 4200—5500块/米以上,塔板高度 0.7—0.9毫米。其分子量分布宽度指数在2左右。素炼后,分子量分布变窄,分子量下降。     

Sol-Gel Processing of Transparent PLZT((Pb,La)(Zr,Ti)O3) Fibers

PLZT((Pb,La)(Zr,Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n-propoxide and titanium isopropoxide containing 2-methoxyethanol as the solvent. The as-drawn gel fibers were pretreated in an autoclave and preheated in flowing H₂O vapor prior to the heat-treatment for crystallization. The effects of autoclaving and preheating in flowing H₂O vapor on the structure and composition of the resultant fibers were investigated. Optically transparent single phase perovskite PLZT fibers of 5–15 m in thickness and 5 cm in length were successfully prepared when the autoclave-treatment and the preheating in flowing H₂O vapor were conducted prior to crystallization. These treatments are thought to promote hydrolysis of the organic groups and polycondensation reaction in the gel fibers, leading to the successful formation of dense, crack-free transparent PLZT fibers.     

Pore Sizes of Solids

A new, fast, and simple method based on size exclusion chromatography permits determination of the volumes of open and closed pores of rigid solids such as silica or porous glasses, together with the specific surface and the pore-size distribution for pore diameters ranging from 10 to 4000Å. The results are in good agreement with those obtained by classical methods (capillary condensation, mercury porosimetry).     

The optimization of silica gel synthesis from chemical bottle waste using response surface methodology

To reduce the amount of hazardous chemical bottle waste in the environment, we report the optimization research of silica extraction in chemical bottle waste into silica gel. Alkali fusion and sol–gel process were utilised to prepare silica gel effectively. The alkali fusion process was carried out by adding sodium hydroxide to produce sodium silicate. Afterwards, silica gel was prepared by the sol–gel method using hydrochloric acid. Box-Behnken Design (BBD) was applied to Optimisation factors the poptimiseactors affecting the silica recovery. The factors that optimised mass ratio, particle size, and temperature. The optimum recovery of silica gel was obtained by SiO₂: NaOH mass ratio of 1:3, the particle size of 63–74 µm, and a temperature of 800 °C. The purity of silica gel optimum is 63.74% characterised using X-ray fluorescence. The structure of silica gel is the appearance of amorphous peaks at 2θ 20-30° characterised using an x-ray diffractogram. The silica gel surface was characterises using scanning electron microscopy-energy dispersive x-ray. It showed an irregular surface and characteristic showed that silica gel had a radius of 15.74 nm and a specific surface area of 297.08 m².     

Effect of surface treatment on the Hamaker constant of intermediate modulus carbon fibers

The Hamaker constant of unsized intermediate modulus carbon fibers was evaluated by contact angle measurement following the Fowkes theory of interfacial energetics. The effects of a surface treatment (performed by the manufacturer) and an oxygen plasma treatment (performed by us), both of oxidizing nature, proved to slightly increase the value of the Hamaker constant to a level that enhanced by about 9% the Lifshitz-van der Waals contribution to the theoretical adhesion force between the fiber and an epoxy matrix. A possible explanation of the observed increase of the Hamaker constant is the higher contribution to the overall Lifshitz-van der Waals interaction of Keesom (orientation) and Debye (induction) forces.     

Sol-gel-derived micron scale optical fibers for chemical sensing

We report for the first time on the preparation of organically-doped room temperature processed sol-gel-derived micron scale optical fibers as platforms for chemical- and bio-sensors. Micron scale optical fibers are drawn from fluorescent dye-doped tetraethoxysilane (TEOS)-derived sol-gel solution processed under ambient conditions. Such a simple methodology to entrap organic and even bioactive species within the optical fiber offers many advantages over more conventional ways of immobilizing organic probes for the development of optical sensors. Specifically, we report on the photophysical properties of fluorescein (a pH sensitive fluorescent dye) and rhodamine 6G (R6G; laser dye) entrapped within sol-gel-derived optical fibers. We present the preliminary results on the viability of such doped optical fibers for chemical sensing. Our results demonstrate that a fluorescein-doped sol-gel-derived optical fiber responds to ammonia and acid vapors with a response time of 1–2 seconds.