Crystal Structure of a Supramolecular Complex Formed between 1-bromo-2-iodo-tetrafluoroethane and N,N,N′,N′-tetramethyl-ethylenediamine

X-ray analysis has revealed that N,N,N′,N′-tetramethyl-ethylenediamine 1 form donor–acceptor complex 3 with 1-bromo-2-iodo-tetrafluoroethane 2, in which the N X (X = Br, I) distances are longer than the average covalent bond length between X and N, but are also definitively shorter than the sum of the corresponding van der Waals radii of X and N, thus that indicating weak interactions between the nitrogen and bromine or iodine atoms. In our experimental section, a valuable method for recrystallization and collect X-ray data from crystals that easily exhibit decay and can be cracked is reported.     

用N2O-C2H2火焰原子吸收光谱法测定不锈钢材料中钛

采用了N2O-C2H2火焰原子吸收光谱法测定不锈钢材料中钛．介绍钛的最佳测定条件以及线性范围的浓度．在样品测定中对干扰因素进行了综合考虑．实验表明：该方法灵敏度高、干扰小、选择性好、操作简便、容易掌握、分析周期短等优点．测定样品钛1．0～60．0mg／L时，其相对标准偏差均小于1．0％(n=6)．标准加入回收率均为97．00-100．0％(n=6)之间．该方法用于不锈钢材料中钛的测定，结果满意。     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

次甲基硅SiH与H2X(X=O,S)反应的热力学及动力学性质研究

在量子化学对SiH与H₂O和H₂S反应计算的基础上,运用统计热力学和Wigner校正的Eyring过渡态理论,计算了上述两反应在200～2000 K温度范围内的热力学函数、平衡常数、频率因子A和速率常数随温度的变化。计算结果表明,两反应在低温下具有热力学优势,而在高温下具有动力学优势。比较两反应的计算结果发现,在相同的温度下,SiH与H₂O反应比SiH与H₂S反应放热较多,但速率常数却较小。SiH与H₂O反应和前文报道的SiH与HF反应的比较表明,SiH与H₂O反应放热较少,而且在相同温度下,速率常数也较小。     

In Situ IR Spectroscopic Studies on Molybdenum Nitride Catalysts: Active Sites and Surface Reactions

Recent IR spectroscopic studies on the surface properties of fresh Mo₂N/-Al₂O₃ catalyst are presented in this paper. The surface sites of fresh Mo₂N/-Al₂O₃, both Mo⁺ (0<<2) and N sites, are probed by CO adsorption. Two characteristic IR bands were observed at 2045 and 2200 cm^-1, due to linearly adsorbed CO on Mo and N sites, respectively. The surface N sites are highly reactive and can react with adsorbed CO to form NCO species. Unlike adsorbed CO on reduced passivated one, the adsorbed CO on fresh Mo₂N/-Al₂O₃ behaves similarly to that of group VIII metals, suggesting that fresh nitride resembles noble metals. It is found that the surface of Mo nitrides slowly transformed into sulfide under hydrotreating conditions, which could be the main reason for the activity drop of molybdenum nitride catalysts in the presence of sulfur-containing species. Some surface reactions, such as selective hydrogenation of 1,3-butadiene, isomerization of 1-butene, and hydrodesulfurization of thiophene, were studied on both fresh and reduced passivated Mo₂N/-Al₂O₃ catalysts using IR spectroscopy. The mechanisms of these reactions are proposed. The adsorption and reaction behaviors of these molecules on fresh molybdenum nitride also resemble those on noble metals, manifesting the unique properties of fresh molybdenum nitride catalysts. Mo and N sites are found to play different roles in the adsorption and catalytic reactions on the fresh Mo₂N/-Al₂O₃ catalyst. Generally, Mo sites are the main active sites for the adsorption and reactions of adsorbates; N sites are not directly involved in catalytic reactions but they modify the electronic properties of Mo sites.     

Syntheses based on (N,N-difluoroamino)dinitroacetonitrile

High reactivity of the nitrite group in (NN-difluoroamino)dinitroacetonitrile was demonstrated. Based on its reaction with HN₃, a new preparative method for the synthesis of 5-[(N,N-difluoroamino)dinitromethylltetrazole was developed; some derivatives of the latter compound have been obtained.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8. pp. 2056–2058, August, 1996.     

Modification of polybenzimidazole: Synthesis and thermal stability of poly(N1-methylbenzimidazole) and poly(N1,N3-dimethylbenzimidazolium) salt

Poly(N₁,N₃-dimethylbenzimidazolium) (PDMBI) salt and poly(N₁-methylbenzimidazole) (PMMBI) were synthesized by methylation of commercial polybenzimidazole [poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole (PBI)]. First, the N-lithium salt of polybenzimidazole was formed by treating polybenzimidazole solution of 1-methyl-2-pyrolidinone (NMP) with lithium hydride at 80°C for 18 h. Ninety percent substitution of PMMBI was obtained by treating the N-lithium salt of PBI with equimolar ratio of iodomethane at room temperature. Upon addition of excess iodomethane to the lithium salt of PBI at 80°C, a polymer was formed that showed 100% substitution on the N₁ nitrogen and about 30% substitution of the methyl group on the N₃ nitrogen in the form of N₁,N₃-dimethylbenzimidazolium iodide salt [PDMBI (30%)]. The content of the benzimidazolium iodide salt was increased to about 90% by dissolving PDMBI (30%) in dimethyl sulfoxide (DMSO) and re-treating with excess iodomethane at 80°C overnight. The modified PBI polymers were characterized by NMR and FTIR. The modified PBI differed in solubility from PBI. PMMBI could be easily dissolved in NMP and PDMBI in DMSO at room temperature. The solution of PDMBI could be mixed with water in all proportions without precipitation. PDMBI could be also dissolved directly in a mixture of DMSO and water (1 : 1). Typical polyelectrolyte behavior of viscosity was found in solution of PDMBI (30%) and PDMBI (90%) when DMSO and a mixture of DMSO and water were used as solvents. A salt effect on viscosity was also found in the mixed solvent solution. Thermogravimetric analysis (TGA) showed that the methyl group on the imidazole ring was unstable above 180°C under nitrogen. When PDMBI was heated under nitrogen, one of the methyl groups was lost with the counterion to result in a neutral PMMBI. © 1993 John Wiley & Sons, Inc.     

Excess and partial excess molar volumes of mixing of N,N-dibutyl-2-ethylhexamide with dodecanol

Excess and excess partial molar volumes of mixing of the system N,N-dibutyl-2-ethylhexylamide (DBEHA) + dodecanol (DDA) were determined at 25, 35, 45, 55 and 65°C. The excess molar volumes exhibit a maxima at each temperature at approximatelyx _DBEHA = 0.3 and a minima close tox _DBEHA = 0.9. The values of the excess volumes in general increase with the temperature. The partial excess molar volumes are calculated from the smoothed data and the results are discussed in the light of postulated amide-alcohol interactions.     

N,N′-双吡咯的合成及其邻位基团效应

2,2-联吡咯是某些天然存在的活性吡咯化合物中关键组成,关于手性联吡咯的研究己有详细的综述报道。近年发现,某些含N-取代氨基的空间阻碍吡咯有明显的生理活性和可贵的药理性质。N,N′-联吡咯中N-N键,很容易发生均裂反应而生成游离基,后     

Spectrophotometric assay of cephalosporins in pharmaceutical products,using chromotrope 2B and chromotrope 2R

A simple, rapid and sensitive Spectrophotometric method is proposed for the determination of cephadroxil (I), cephalexin (II) and cephradine (III). The method is based on ion-pair complex formation between these derivatives and Chromotrope 2B (C2B) or Chromotrope 2R (C2R), to give a highly coloured radical anion. The coloured products are quantified spectrophotometrically at 542 and 564 nm for C2B and C2R, respectively. The optimization of the experimental conditions is described. The method has been used for the determination of 0.4–15, 0.4–14 and 0.4–18 g/ml of drugs I, II and III, respectively. The accuracy of the method is indicated by the excellent recovery (100.0±1.7%) and the precision is supported by the low relative standard deviations 1.5%. The sensitivity of the method is discussed and the results are compared with the official method. The interference from common degradation products and excipients was also studied. The proposed method was applied successfully to the determination of the different cephalosporins in dosage forms, with good precision and accuracy. The results were compared with those given by the official B.P. 1993 method.