Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.     

A gas-phase electron diffraction study of the molecular structure of tetravinylsilane

The molecular structure of tetravinylsilane has been studied by gas-phase electron diffraction. The radial distribution curve suggests the absence of conformers having vinyl double bonds staggered with respect to the SiC₄ skeleton. Of the eclipsed or approximately-eclipsed conformers, the one with S₄ symmetry gives the best fit with experiment, although a small admixture of a C₁ conformation cannot be ruled out. Least-squares refinement gave the following values for the independent structural parameters (lengths, r_a basis; angles, r_α basis): C-H = 1.118 ± 0.003 Å, CC = 1.355 ± 0.002 Å, Si-C = 1.855 ±0.002 Å, ∠SiCC = 124.0 ± 0.3°, ∠SiCH = 118.4 ± 1.0°, torsion angles CSiCC are 17.5 ± 0.6° from the eclipsed conformation. During the refinement the vibrational amplitudes u and perpendicular amplitude corrections K were held constant at calculated values. The CC bond length provides evidence of interaction between the vinyl π-bonds and the vacant d-orbitals of silicon.     

Charge equilibria and pK values of 5-carboxypyranomalvidin-3-glucoside (vitisin A) by electrophoresis and absorption spectroscopy

Apparent pK values of the wine pigment, 5-carboxypyranomalvidin-3-glucoside (vitisin A), were determined using UV-vis spectroscopy, viz. pK_a1=0.98 (±0.10), pK_H1=4.51 (±0.03) and pK_H2=7.57 (±0.02). An additional ionisation constant at high pH (pK_a4=8.84±0.06) was established by high-voltage paper electrophoresis. These data in conjunction with previously published pK_a values determined by high-voltage electrophoresis suggest that in wine (pH 3.2-3.8), 5-carboxypyranomalvidin-3-glucoside exists as a complex mixture of hydrated and non-hydrated, partially ionised species with the predominant species being the quinonoidal base (λ_max 498 nm).     

Online photocatalytic device for highly selective pre-column fluorescence derivatization of 5-hydroxyindoles with benzylamine

A fluorimetric liquid chromatographic method for the determination of 5-hydroxyindoles based on the benzylamine derivatization process mediated through an online photocatalytic oxidation has been developed. In this study, we used a photocatalytic column comprising tefzel tubing packed with TiO₂-coated glass beads, as a pre-column derivatization reactor. The fluorescence derivatization of 5-hydroxyindoles using benzylamine proceeded during their passage through the reaction column under near-UV irradiation. The 5-hydroxyindole derivatives were separated continuously on a reversed-phase liquid chromatography within 50 min, using 100 mM acetate buffer (pH 4.6)-acetonitrile (72:28, v/v; isocratic elution) containing 3 mM sodium octanesulfonate; the samples were detected fluorimetrically at 465 nm upon excitation at 350 nm. The detection limits (signal-to-noise ratio = 3) of the 5-hydroxyindoles were in the range from 160 to 360 fmol per 5 μL injection. We have applied this method, which requires minimal sample pre-treatment, to the determination of 5-hydroxyindole-3-acetic acid in human urine.     

Transformed steroids

A preparative method for 9a-hydroxylation of ⁵-3-hydroxysteroids using the fungi ofCircinella sp. 10Kh-1220 not capable of modifying theA ring has been developed. It is established that the yields of the main and the side products greatly depend on the transformation conditions, mycelium age, and the structure of the steroid substrate. Under the optimal transformation conditions novel 9-hydroxysubstituted derivatives of androstenolone, pregnenolone, 16-dehydro-16,17-epoxy-, and-16-methoxypregnenolone have been obtained in 36–80 % yields.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 737–743, April, 1994.     

Synthesis of bis(alk-3-en-1-ynyl)benzene with either E- or Z-configuration via a one-pot three-component coupling reaction and its optical properties

A convenient, efficient and stereoselective synthesis of a range of bis(alk-3-en-1-ynyl)benzenes with E- and Z-configuration is described. The protocol involves Cu-mediated cross-coupling reaction of (E)- and (Z)-alk-1-enyldisiamylboranes with (trimethylsilyl)ethynyl bromide and Pd/Cu-catalyzed cross-coupling reaction with diiodobenzene. The sequential cross-coupling reaction proceeds readily under extremely mild conditions in a one-pot manner to afford bis(alk-3-en-1-ynyl)benzenes in good to excellent yields. The optical properties of the products are also described.     

4-Hydroxy-2-quinolones. 122. 1-Hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-<Emphasis Type="Italic">ij</Emphasis>]-quinoline-2-carboxylic acid hetarylamides as potential antitubercular agents

An improved method is reported for the synthesis of a series of 1-hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-ij]quinoline-2-carboxylic acid hetarylamides. The antitubercular activity of all of the compounds prepared has been studied. The structure-biological activity dependence revealed is discussed. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1023–1033, July, 2007.     

DOPING LEVEL INCREASE OF POLY(3-METHYLTHIOPHENE)FILM DURING ELECTROCHEMICAL POLYMERIZATION PROCESS

The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have beenelectrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in borontrifluoride diethyl etherate (BFEE) at a constant applied potential of 1.38 V (versus SCE), have been investigated byexcitation with a 633-nm laser beam. The spectroscopic results demonstrated that the doping level of PMeT film wasincreasing during film growth. This finding was also confirmed by electrochemical examination. Moreover, the Raman bandsassigned to radical cations and dications in doped PMeT films were found approximately at 1420 and 1400 cm~(-1),respectively. Radical cations and dications coexist on the backbone of PMeT as conductive species and their concentrationsincrease with the increase of doping level. Successive cyclic voltammetry was proved to be an effective approach toimproving the doping level of as-grown thin compact PMeT film.     

Deoxypegan-1-one derivatives. synthesis and borohydride reduction of 3-[(E)-arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolin-1(2H)-ones

3-[(E)-Arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolin-1(2H)-ones were prepared by reaction of quinazolyl-2-propionic acid hydrochloride with aromatic aldehydes in acetic anhydride in the presence of Et₃N. 3-[(E)-Arylmethylidene]-1,2,3,9-tetrahydropyrrolo[2,1-b]quinazolin-1-ols were formed by reduction of the 3-arylidene derivatives with sodium borohydride in methanol, readily lost water when heated with acids, and were converted into 3-[(E)-arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolines. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 463–467, September–October, 2006.     

Molecular modeling of cytochrome P450 3A4

The three-dimensional structure of human cytochrome P450 3A4 was modeled based on crystallographic coordinates of four bacterial P450s: P450 BM-3, P450cam, P450terp, and P450eryF. The P450 3A4 sequence was aligned to those of the known proteins using a structure-based alignment of P450 BM-3, P450cam, P450terp, and P450eryF. The coordinates of the model were then calculated using a consensus strategy, and the final structure was optimized in the presence of water. The P450 3A4 model resembles P450 BM-3 the most, but the B helix is similar to that of P450eryF, which leads to an enlarged active site when compared with P450 BM-3, P450cam, and P450terp. The 3A4 residues equivalent to known substrate contact residues of the bacterial proteins and key residues of rat P450 2B1 are located in the active site or the substrate access channel. Docking of progesterone into the P450 3A4 model demonstrated that the substrate bound in a 6-orientation can interact with a number of active site residues, such as 114, 119, 301, 304, 305, 309, 370, 373, and 479, through hydrophobic interactions. The active site of the enzyme can also accommodate erythromycin, which, in addition to the residues listed for progesterone, also contacts residues 101, 104, 105, 214, 215, 217, 218, 374, and 478. The majority of 3A4 residues which interact with progesterone and/or erythromycin possess their equivalents in key residues of P450 2B enzymes, except for residues 297, 480 and 482, which do not contact either substrate in P450 3A4. The results from docking of progesterone and erythromycin into the enzyme model make it possible to pinpoint residues which may be important for 3A4 function and to target them for site-directed mutagenesis.