LaB6在低压强氮气和氦气中的放电特性

 研究了LaB₆在1~10 Pa氮气和氦气中的直流和脉冲放电特性以及放电过程对电极的影响。结果表明，电极直径为5 mm的LaB6氦气放电管在脉冲工作状态下可以长期稳定放电。在脉冲电压为2.2 kV、脉冲宽度10 ms、频率13.3 Hz下，脉冲峰值放电电流超过120 A。氦气放电管在放电过程中，阴极表面有离子的清洗和活化作用，可以使电极的表面逸出功降低，提高放电管的发射能力和稳定性。LaB₆作为气体放电电极具有寿命长、延迟时间短、放电电流大等优点，可用于重复强流脉冲气体放电的高压高速开关器件。     

A linearized vector radiative transfer model for atmospheric trace gas retrieval

We present a plane parallel radiative transfer model for polarized light, that provides the intensity vector as well as the derivatives of the four Stokes parameters with respect to atmospheric trace gas profiles. These derivatives are essential for retrieval of height resolved trace gas information from satellite measurements of backscattered sunlight. The model uses the Gauss-Seidel iteration technique for solving the radiative transfer equation. For the first time, the forward-adjoint radiative perturbation theory is applied for the linearization of a radiative transfer model including polarization. The accuracy of the model is better than 0.025% for all four Stokes parameters and better than 0.03% for the derivatives.     

Analytic evaluation of the weighting functions for remote sensing of blackbody planetary atmospheres: a general linearization approach

An analytic approach is proposed for the evaluation of weighting functions for remote sensing of a blackbody planetary atmosphere based on straightforward, general linearization. In the present paper, this approach is applied to the case of remote sensing with the nadir (down-looking) geometry. Expressions for weighting functions for various atmospheric parameters are derived. It is demonstrated that in a realistic case of temperature-dependent atmospheric absorption, an additional term appears in the expression for the temperature weighting function which contains the temperature derivative of the atmospheric absorption coefficient. The approach is applied to the case of a semi-infinite atmosphere and then, to the atmosphere of a finite optical depth with the underlying surface. In this, latter case, the expressions are also obtained for partial derivatives of observed radiances with respect to surface parameters: surface pressure, temperature and emissivity.     

气体放电击穿过程的物理和数值研究

本文对低气压（１０＾－２Ｐａ）热阴极气体放电的击穿过程给出了物理描述和相应的双流体数学型，并发展了一种选择和调整未知初始条件的有效算法，可以通过伴随试射法得到对初始条件十分敏感的非线性两点边值常微分方程组的数值解，从而给出这类气体放电中击穿过程的定量描述。     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.     

Recent theories of gas sorption in polymers

Theories and models are presented for gas sorption in polymers above and below the glass transition temperature. With the exception of predictive theories that do not represent the data well, the models are fit to data for the carbon dioxide/silicone rubber and carbon dioxide/polycarbonate systems for the purposes of comparison. During the past decade, a number of new models and theories have been proposed specifically for gas sorption in glassy polymers. Each new model attempts to incorporate aspects of the gas sorption process that are unique to polymers below the glass transition temperature. This review discusses these recent advances, the assumptions used in their development and their advantages and disadvantages.     

Determination of the boiling point distribution of sulfur compounds in light cycle oil using GC with a flame photometric detector and pyrolyzer

A method has been developed to determine the boiling point distribution of sulfur compounds in light cycle oils (LCO'S). The method chosen for this analysis was GC with a flame photometric detector (FPD) and pyrolyzer. Tests were carried out to evaluate the recovery efficiency, repeatability, and accuracy of the method. Repeatabilities within 2% were obtained. The recovery of benzothiophenes and dibenzothiophenes was close to 100%; this was important because these are the major sulfur components in LCO's. No hydrocarbon or solvent interferences were observed with the use of the pyrolyzer, even for a 95% solvent level. Comparison with results from other techniques showed that the method accurately determined the levels of sulfur compounds in the LCO boiling point range.     

Use of a long-spacer-side-chain liquid crystalline polysiloxane containing a crown ether as a stationary phase for capillary gas chromatography

A new kind of side chain liquid crystalline polysiloxane containing a crown ether with a longer spacer (PSC-11) has been prepared and coated on a fused silica capillary column. The main chroma-tographic characteristics including efficiency, polarity, and selectivity have been examined. The phase exhibits the retention properties of both liquid crystal and crown ether stationary phases and possesses higher efficiency and better selectivity than PSC-3, which has a shorter spacer between the main polysiloxane chain and liquid crystalline side chain.     

Native ethylene glycol in wine: Application of a dead volume free,very fast “deans heart-cut” system on-line with multi-chromatography

Data about the existence of native HO? CH₂? CH₂? OH (MEG) in natural wines and champagne has led to delicate questions because of legal decisions already made to declare wine or champagne illegal for sale if the MEG concentrations found are above 10 mg/liter. Action has been taken because of the DEG (diethylene glycol) disaster in European wines of 1985…86. An incorrect legal decision was made due to the belief that MEG cannot be produced biochemically by grape vines. A further reason may be lack of correct data on native MEG trace concentrations, as a result of the special behavior of this diol. As first member of a homologous series whose higher members (C₄) are normally found in all wines at quite high concentration levels, MEG shows extremely adsorptive behavior. The solution of the chromatographic problems is summarized in this paper. MEG concentrations in Riesling as example are in the range of 2 to 6 mg/liter and can easily be increased by biotechnological steps to a level of around 10 to 60 mg/liter. This is again due to the specific adsorptive behavior of MEG, which can be enriched on filter surfaces and displaced when the wine acidity changes with changing types. In order to control and guarantee the qualitative and quantitative results of MEG analyses we used a combination of Deans heart cutting on-line with Multi-Chromatography. It was easy to produce false data by many otherwise useful single column or two-dimensional separation processes, etc.     

Enthalpies of sorption of linear hydrocarbons (C2–C8) and chloroderivatives of methane and ethylene on the surface of hydrotalcite

Differential molar adsorption enthalpies (DMAE) were determined by gas chromatographic measurements of specific retention volume of vapors on the surface of two forms of Mg–Al hydrotalcite. A linear dependence of the DMAE on the number of the carbon atoms in hydrocarbons was observed for both form of hydrotalcite. The dependence of the differential molar adsorption enthalpies on the number of chlorine atoms in organic molecules is discussed. A linear dependence of DMAE on the molecular weight of chloroderivatives of methane and ethylene on the basic form in an order monochloromethane < dichloromethane < trichloromethane or vinylidene chloride < 1,1-dichloroethylene < trichloroethylene was found.