VISCOUS FORCES BETWEEN TWO SPHERES COLLIDING THROUGH INTERSTITIAL POWER-LAW FLUID

Interaction between two spheres with an interstitial fluid is essential in Discrete Element modeling for simulating the behaviors of ‘wet‘ particulate materials. In this paper the interaction between two spheres with an interstitial Power-law fluid was approximately resolved as normal and tangential interactive models respectively, for which the governing equations were simplified on the basis of Reynolds approximation. These equations were then solved analytically together with the boundary conditions to obtain the pressure distributions for each individual model, and event ually solutions of the viscous squeeze force and the tangential viscous resistance were obtained, which provide a set of solutions for implementing into DEM code or other purposes.     

周期型二元颗粒链中孤波传播的二体碰撞近似分析

本文运用二体碰撞近似理论研究了孤波在周期型二元颗粒链中的传播. 周期型二元颗粒链由N个大球和一个小球交替排列而成, 球的材质都相同. 将小球和与之相邻的大球等效成一个球, 形成一条等效链. 采用二体碰撞近似理论, 推导了孤波在颗粒链中传播的速度、通过颗粒链时间以及小球的振荡频率. 理论分析得到小球振荡频率随着半径的增大而减小, 该结果与计算机模拟结果符合得相当好. 二体碰撞近似理论给出的波通过整条颗粒链时间, 在N ≤ 2时与计算机模拟结果符合得很好. 理论计算的误差随链长的变化不大. 但随着N的增大, 理论得到的结果相对误差变大.     

几类粒子密度算符和粒子流密度算符的讨论

从粒子密度和粒子流密度出发,分析了几类相关的算符,讨论了它们的性质与相互关系;从具体的物理意义出发,明确了合适的粒子密度算符和粒子流密度算符的表达形式.     

高效液相色谱法测定感冒止咳颗粒中黄芩苷的含量

采用高效液相色谱(HPLC)法,用C18色谱柱,甲醇-水-冰乙酸为(55:45:1,V/V/V)流动相,在波长276 nm处测定感冒止咳颗粒中黄芩苷的含量.黄芩苷在0.101～1.01μg范围内与峰面积有良好的线性关系(r=0.9998),平均回收率为100.26%,相对标准偏差为1.52%(n=6).该法操作简便,分析速度快,结果准确,可用于感冒止咳颗粒中黄芩苷含量的测定.     

Micellar and aqueous‐organic liquid chromatography using sub‐2 μm packings for fast separation of natural phenolic compounds

The objective of the present work was to investigate the chromatographic behavior of natural phenolic compounds in micellar and aqueous‐organic LC using a short column packed with 1.8 μm particles. Firstly, the effect of ACN and SDS on elution strength and selectivity was examined by isocratic submicellar (0–30% ACN/5% 1‐butanol/1–6 mM SDS) and micellar (0–30% ACN/5% 1‐butanol/40–60 mM SDS) systems. The varied concentrations of two modifiers in the mobile phases revealed different eluting power. Then, the application of organic modifier gradient was discussed in both submicellar and micellar LC using mobile phases of 4 mM SDS/5% 1‐butanol or 50 mM SDS/5% 1‐butanol containing ACN gradient from 0 to 30%, respectively. For micellar system, the separation was found to be better in gradient than isocratic elution. Additionally, the sensitivity of aqueous‐organic LC was examined. The mobile phase was a mixture of ACN and water employing gradient elution at a flow rate of 0.5 mL/min, with analysis time below 9 min. It was found that separation efficiency was significantly better compared with micellar LC. Besides, the aqueous‐organic LC has been applied to separation of various phenolic compounds in Yangwei granule or Radix Astragali samples.     

Heterogeneity of starch granules and the effect of granule channelization on starch modification*

This paper reviews the discovery of channels ID starch granules and progress of research on their effects on granule modification and digestibility, their nature, hypotheses on how they are formed and why they are present, and genetic control of their occurrence. Emphasized ID the relationship of channels to starch derivatization. Channelization ID presented as additional evidence of the heterogenous nature of starch granules from source to source and within a single source. A new method of determining the location of anionic entities within starch granules that utilizes reflectance confocal laser scanning microscopy ID described.     

川芎浓缩颗粒挥发性成分分析

采用气相色谱－质谱法对川芎浓缩颗粒挥发性成分进行分离鉴定。从水蒸气蒸馏法工艺制备的浓缩颗粒（样品I）中分离鉴定了12个成分,主要为亚油酸、棕榈酸;从超临界CO2流体萃取工艺制备的浓缩颗粒（样品Ⅱ）中分离鉴定了32个成分,主要为藁本内酯、亚油酸。用面积归一化测定了样品Ⅰ、Ⅱ中成分的相对百分含量。     

聚合氯化铝制备球形拟薄水铝石和γ-Al_2O_3的研究Ⅰ——制备条件探讨

采用实验室自制的聚合氯化铝为原料,结合溶胶-凝胶法和油滴法制备球形拟薄水铝石及其衍生物γ-Al2O3,采用XRD,TEM和N2吸附法对样品进行了分析表征,探讨了不同pH值、不同铝形态含量的聚合氯化铝、不同煅烧温度及不同表面活性剂对产物结构性质的影响。结果表明:pH值在8.5附近合成的水合氧化铝以拟薄水铝石为主;高Alc含量的聚合氯化铝有利于形成高比表面积的球形产物;在450～750℃下煅烧产物为球形γ-Al2O3,并且随温度升高,产物比表面积下降、孔径增大,孔容变化不明显,在1000℃下煅烧产物为球形θ-Al2O3与γ-Al2O3的混合物;随着聚乙二醇表面活性剂分子量的增加,所得球形γ-Al2O3的孔容和孔径增大,聚乙二醇10000的扩孔效果最好,450℃下煅烧所得球形γ-Al2O3的比表面积、孔容分别达326m2·g-1、0.55cm3·g-1。     

ITO前驱物氢氧化铟In(OH)3理论研究

分析了铟锡氧化物IT0 (IndiumTinOxide)前驱体氢氧化铟In(OH) 3的结构 ,理论计算了其马德隆常数和晶格能 ,其值分别为 2 94 88和 - 5 0 95 2 1kJ mol,并给出了晶核表面自由能近似公式和晶核生长率的近似表达式 ,进而计算了采用化学沉淀法制备In(OH) 3纳米粉末时的晶核形成参数 ,In(OH) 3晶核生长初期的生长率约为 0 0 1 2nm s.     

Electrostatic charging of single granules by repeated sliding along inclined metal plates

In this work, repeated sliding tests for single granules were investigated for their electrostatics generation. Several factors were considered including granule length-ratio, sliding face shape, sliding times, sliding area, sliding velocity, front-facing edge, plate inclined angle and humidity. Generally, it is found that electrostatics increases with granule length-ratio. Two kinds of granular sliding face shapes were used in this work, half circle and rectangle. Under the same working conditions, a granule with the sliding face shape of half-circle tends to produce more electrostatics than that of rectangle. In addition, the efficiency of granule charge generation increases with sliding times although the amount of impact charge is decreased by the initial charge. Electrostatics increases with sliding area, which is independent of granule sliding-face shape and sliding times. Electrostatics also increases with granule sliding velocity. Front-facing sliding with a short edge tends to generate more electrostatics than that with a long edge. In this work, three sliding-plate angles were chosen as 30°,54°,70°, where granules sliding along the inclined plate at 54° acquired the highest electrostatics in comparison with other two angles. Humidity has significant effect on electrostatics as that electrostatics decreases with humidity. At lower relative humidity, the granule length-ratio is found to have more effect on electrostatics.