Substitutional carbon defects in silicon: A quantum mechanical characterization through the infrared and Raman spectra

The infrared (IR) and Raman spectra of eight substitutional carbon defects in silicon are computed at the quantum mechanical level by using a periodic supercell approach based on hybrid functionals, an all electron Gaussian type basis set and the CRYSTAL code. The single substitutional C _s case and its combination with a vacancy (C _sV and C _sSiV) are considered first. The progressive saturation of the four bonds of a Si atom with C is then examined. The last set of defects consists of a chain of adjacent carbon atoms C, with i = 1–3. The simple substitutional case, C _s, is the common first member of the three sets. All these defects show important, very characteristic features in their IR spectrum. One or two C related peaks dominate the spectra: at 596 cm⁻¹ for C _s (and C _sSiV, the second neighbor vacancy is not shifting the C _s peak), at 705 and 716 cm⁻¹ for C _sV, at 537 cm⁻¹ for C and C (with additional peaks at 522, 655 and 689 for the latter only), at 607 and 624 cm⁻¹, 601 and 643 cm⁻¹, and 629 cm⁻¹ for SiC, SiC, and SiC, respectively. Comparison with experiment allows to attribute many observed peaks to one of the C substitutional defects. Observed peaks above 720 cm⁻¹ must be attributed to interstitial C or more complicated defects.     

Study of spectral analytical data using fingerprints and scaled similarity measurements

A new chemoinformatic model has been developed for enlarging the differences between spectra and applied to differentiation of wines according to the criteria grape origin and variety and ageing process. The model is based on generation of fingerprints from normalised spectra, using empirical parameters and a set of 120 samples. After generation of the fingerprints, similarity matrixes were built on the basis of the Tanimoto similarity index between the fingerprints of the samples. Calculation of the Tanimoto index was modified to adapt the index to the characteristics of the analytical measurements. Thus, scaling factors taking into account pattern fingerprints generated from a group of samples with common characteristics were used. In addition, a modified expression for calculating the Tanimoto index was employed. Principal-components analysis (PCA) and soft independent modelling of class analogy (SIMCA) were applied to the similarity matrixes. The results obtained are discussed as a function of the normalisation method employed, the empirical factor used in generation of the fingerprints, and selection of samples for building the pattern fingerprint, etc. Finally, results from differentiation of wines are compared with those obtained by applying PCA to the unprocessed spectra as stated by the proposed model.     

Novel platinum-catalysed cascade reactions: cyclisation, ring expansion and 1,2-oxygen shift reaction of a camphor-derived diyne

2,3-Bis(ethynyl)-3-hydroxy-camphorsultam was converted in one step into a novel tetracyclic cyclopentenone derivative, in an unprecedented platinum-catalysed cascade reaction. In the course of this reaction, cyclisation of the alkynes takes place, together with a ring expansion of the camphor skeleton and 1,2-migration of an oxygen atom. The structure of the unexpected product was analysed in detail by one- and two-dimensional NMR spectroscopy, and validated with the help of quantum mechanical calculations (B3LYP/6-31G^∗∗ and B3LYP/6-31+G(2df)) of the IR vibrational frequencies and the ¹H and ¹³C isotropic chemical shifts.     

Structures and stability of N7+ and N7− clusters

Ab initio molecular orbital theory and density functional theory have been used to study nine isomers of N₇ ionic clusters with low spin at the HF/6-31G*, MP2/6-31G*, B3LYP/6-31G*, and B3LYP/6-311(+)G* levels of theory. All stationary points are examined with harmonic vibrational frequency analyses. Four N₇ ⁺ isomers and five N₇ ⁻ isomers are determined to be local minima or very close to the minima on their potential-energy hypersurfaces, respectively. For N₇ ⁺ and N₇ ⁻, the energetically low lying isomers are open-chain structures (C _{2 v} and C _{2 v} or C₂). The results are very similar to those of other known odd-number nitrogen ions, such as N₅ ⁺, N₉ ⁺, and N₉ ⁻, for which the open-chain structures are also the global minima. This research suggests that the N₇ ionic clusters are likely to be stable and to be potential high-energy-density materials if they could be synthesized. Received: 16 July 2001 / Accepted: 8 October 2001 / Published online: 21 January 2002     

From a point-like to an arbitrarily shaped sample: A survey of equations for electron paramagnetic resonance signal intensity calculations

A set of original, analytical equations useful for theoretical calculation of the electron paramagnetic resonance (EPR) signal intensity are presented for the multitude of sample shapes, which range from point-like, line-like, planar, rectangular, cubical, circular, cylindrical, spherical to an irregularly shaped sample. The samples can be situated at any available position within the prescribed part of the microwave cavity (a central cylinder of diameter 11 mm and length 23.5 mm, in either a Bruker single TE₁₀₂ or double TE₁₀₄ rectangular cavity, with the modulation coils situated in the left and right side cavity walls, which is connected to a X-band, field-modulated CW Bruker EPR spectrometer). The theoretical computations of EPR signal intensity can be used in the computer simulations in which: (i) the EPR signal intensity profiles are constructed; (ii) the optimal sample positions in the cavity to give a maximum value of signal intensity are found; (iii) the errors associated with sample positioning within the cavity when compared to a second sample of a different size, shape or position are studied.     

Electronic influences on 3J(C,H) coupling constants via -S-, -S(O)- and -SO2-: their determination, calculation and comparison of detection methods

3J(C,H) coupling constants via a sulfur atom in two series of compounds, both including a sulfide, a sulfoxide and a sulfone, were detected experimentally and calculated by quantum mechanical methods. In the first series (1-3) the coupling between a hydrogen, bonded to an sp3 carbon, and an sp2 carbon is treated; the second series (4-6) deals with the coupling between a hydrogen, bonded to an sp3 carbon, and an sp3 carbon. Different pulse sequences (broadband HMBC, SelJres, 1D HSQMBC, J-HMBC-2, selective J-resolved long-range experiment and IMPEACH-MBC) proved to be useful in determining the long-range 3J(C,H) coupling constants. However, the dynamic behaviour of two of the compounds (4 and 6) led to weighted averages of the two coupling constants expected (concerning equatorial and axial positions of the corresponding hydrogens). DFT calculations proved to be useful to calculate not only the 3J(C,H) coupling constants but also the different contributions of FC, PSO, DSO and SD terms; the calculation of the Fermi contact term (FC) was found to be sufficient for the correct estimation of 3J(C,H) coupling constants.     

Three-dimensional configurations of organic/inorganic hybrid nanostructural blocks (I). A quantum mechanical investigation for ladder-like structure of vinylsilsesquioxane

Silsesquioxanes (SSO) or polyhedral oligomericsilsesquioxanes (POSS) are generally prepared frommolecular precursors using the hydrolytic condensa-tion of trialkoxysilane, RSi(OR')3. They are organic/inorganic hybrid nanostructural blocks with theircomplete general formula Tn(T = RSiO1.5, n = 1,2, …), and the incomplete generic formula is Tn-(OH)x(OR')y[x, y = 0, 1, 2, …, T= RSiO1.5 ?(x+y)/2n][1,2].Each VSSO, possessing a certain structural formulaand molecular weight, may h…     

Cl+C2H6→HCl+C2H5反应的准经典轨线研究

用三原子模型的准经典轨线方法研究了Ｃｌ与Ｃ２Ｈ６（ｖ＝０，ｊ）的反应。计算结果表明，反应产物ＨＣｌ的角度分布基本上为各向同性，其振动分布处于基态，与实验结果相一致。对反应轨线的研究表明，该反应为一直接反应，而且反应碰撞在低及高的碰撞参数下的机理不一样，在低碰撞参数下反应碰撞是直接完成的，产物ＨＣｌ以向后散射为主，转动基本上是冷的，但比高碰撞参数下的热。在高的碰撞参数下则生成短寿命的碰撞复合物，产物     

Electrolysis in calorimetry

The procedure used by many electrochemists in calculating enthalpy in calorimetric measurements of electrolysis reactions is compared to a purely thermodynamic approach, using the data published by Fleischmannet al. [J. Electroanal. Chem., 287 (1990) 293.] as a case study.The set of excess values dH _ex/dt=dH _obs/dt -dH_calo/dt obtained with the former procedure was neither correlated to any of the experimental parameters nor to the set of values found using thermodynamics. The latter, smaller by factors of up to two orders of magnitude, are shown to follow an expression of the form dH _ex/dt=–kI exp (–E _a/RT) with an activation enthalpy of about 85 kJ·mol^–1. It is suggested that recombination of electrolysis gases may account for this.

---

Zusammenfassung Das von vielen Elektrochemikern verwendete Verfahren zur Berechnung der Enthalpie in kalorimetrischen Messungen an Elektrolysereaktionen wurde unter Anwendung der von Fleischmann et.al. in einer Fallstudie [J. Electroanal. Chem., 287 (1990) 293.] veröffentlichten Angaben mit einer rein thermodynamischen Näherung verglichen.Eine Reihe von mit der ersten Methode erhaltenen überschu\werten dH _ex/dt=dH _obs/dt-dH _calc/dt korrelierte weder mit den experimentellen Parametern noch mit den entsprechenden, thermodynamisch gefundenen Werten. Letztere, um etwa zwei Grö\enordnungen kleinere Werte konnten durch die Gleichung dH _ex/dt= -kI exp (-E _a/RT) mit einer Aktivierungsenthalpie von etwa 85 kJ·mol^–1 beschrieben werden. Es wird deshalb nahegelegt, da\ dies einer Rekombinierung der Elektrolysegase zugeschrieben werden kann.

     

双氮桥联1,10-菲咯啉大环化合物分子构型的从头算研究

应用规范不变原子轨道法(GIAO)在RHF/6-31G**和B3LYP/6-31G**水平上计算了质子化双氮桥联1,10-菲咯啉大环化合物(H4HAPP2+)C2h和C2h构型的1HNMR,并用TDDFT法计算了H4HAPP2+电子光谱.结果表明,B3LYP/6-31G*优化的C2h构型为较优构型,经谐振频率验证无虚频,C2h构型是H4HAPP2+合理的对称性构型.