Multidimensional gas chromatography for the characterization of permanent gases and light hydrocarbons in catalytic cracking process

An integrated gas chromatographic system has been successfully developed and implemented for the measurement of oxygen, nitrogen, carbon monoxide, carbon dioxide and light hydrocarbons in one single analysis. These analytes are frequently encountered in critical industrial petrochemical and chemical processes like catalytic cracking of naphtha or diesel fuel to lighter components used in gasoline. The system employs a practical, effective configuration consisting of two three-port planar microfluidic devices in series with each other, having built-in fluidic gates, and a mid-point pressure source. The use of planar microfluidic devices offers intangible advantages like in-oven switching with no mechanical moving parts, an inert sample flow path, and a leak-free operation even with multiple thermal cycles. In this way, necessary features such as selectivity enhancement, column isolation, column back-flushing, and improved system cleanliness were realized. Porous layer open tubular capillary columns were employed for the separation of hydrocarbons followed by flame ionization detection. After separation has occurred, carbon monoxide and carbon dioxide were converted to methane with the use of a nickel-based methanizer for detection with flame ionization. Flow modulated thermal conductivity detection was employed to measure oxygen and nitrogen. Separation of all the target analytes was achieved in one single analysis of less than 12 min. Reproducibility of retention times for all compounds were found to be less than 0.1% (n = 20). Reproducibility of area counts at two levels, namely 100 ppm_v and 1000 ppm_v over a period of two days were found to be less than 5.5% (n = 20). Oxygen and nitrogen were found to be linear over a range from 20 ppm_v to 10,000 ppm_v with correlation coefficients of at least 0.998 and detection limits of less than 10 ppm_v. Hydrocarbons of interest were found to be linear over a range from 200 ppb_v to 1000 ppm_v with correlation coefficients of greater than 0.999 and detection limits of less than 100 ppb_v.     

Matrix Infrared Spectroscopy and Quantum‐Chemical Calculations for the Coinage‐Metal Fluorides: Comparisons of Ar?AuF,Ne?AuF,and Molecules MF2 and MF3

The reactions of laser‐ablated Au, Ag, and Cu atoms with F₂ in excess argon and neon gave new absorptions in the M? F stretching region of their IR spectra, which were assigned to metal‐fluoride species. For gold, a Ng? AuF bond was identified in mixed neon/argon samples. However, this bonding was much weaker with AgF and CuF. Molecules MF₂ and MF₃ (M=Au, Ag, Cu) were identified from the isotopic distribution of the Cu and Ag atoms, comparison of the frequencies for three metal fluorides, and theoretical frequency calculations. The AuF₅ molecule was characterized by its strongest stretching mode and theoretical frequency calculations. Additional evidence was observed for the formation of the Au₂F₆ molecule.     

颗粒气体团簇行为实验研究

颗粒体系由于非弹性碰撞和摩擦等内秉的能量耗散特性,由宏观粒子形成的颗粒气体体系经常会有局部凝聚现象,这是颗粒气体体系与分子气体体系的最大区别之一.理解和预测这一现象的发生将有助于人们对远离平衡态体系的复杂现象,如有序结构、斑图和团簇形成的认知.这种局部凝聚现象可以类比于分子气体中亚稳分解形成的液滴,将气液相分离用于解释和寻求局部凝聚现象的此模型得到了分子动力学模拟的校验.但是实验的校验却由于宏观粒子运动受重力作用的影响难以在实验室中实现.作为实践十号卫星的前期实验,本文利用国家微重力实验室落塔装置,以水平激振装有不同尺寸和数目的颗粒样品,在短时微重力条件下,成功观察到颗粒气体团簇的形成;并将实验结果与颗粒气体类范德瓦耳斯气体分子相分离模型对比,由形成团簇样品的颗粒数密度条件,来实验确定了所选颗粒的恢复系数,得到直径为0.5 mm的钛珠颗粒的恢复系数在0.6—0.8之间,直径为1 mm的钛珠颗粒的恢复系数约为0.8,直径为2.5 mm的钛珠颗粒的恢复系数应大于0.8.     

The slowly reacting mode of combustion of gaseous mixtures in spherical vessels. Part 1: Transient analysis and explosion limits

Frank-Kamenetskii's analysis of thermal explosions is revisited, using also a single-reaction model with an Arrhenius rate having a large activation energy, to describe the transient combustion of initially cold gaseous mixtures enclosed in a spherical vessel with a constant wall temperature. The analysis shows two modes of combustion. There is a flameless slowly reacting mode for low wall temperatures or small vessel sizes, when the temperature rise resulting from the heat released by the reaction is kept small by the heat-conduction losses to the wall, so as not to change significantly the order of magnitude of the reaction rate. In the other mode, the slow reaction rates occur only in an initial ignition stage, which ends abruptly when very large reaction rates cause a temperature runaway, or thermal explosion, at a well-defined ignition time and location, thereby triggering a flame that propagates across the vessel to consume the reactant rapidly. Explosion limits are defined, in agreement with Frank-Kamenetskii's analysis, by the limiting conditions for existence of the slowly reacting mode of combustion. In this mode, a quasi-steady temperature distribution is established after a transient reaction stage with small reactant consumption. Most of the reactant is burnt, with nearly uniform mass fraction, in a subsequent long stage during which the temperature follows a quasi-steady balance between the rates of heat conduction to the wall and of chemical heat release. The changes in the explosion limits caused by the enhanced heat-transfer rates associated with buoyant motion are described in an accompanying paper.     

Long‐Lived Spin States for Low‐Field Hyperpolarized Gas MRI

Parahydrogen induced polarization was employed to prepare a relatively long‐lived correlated nuclear spin state between methylene and methyl protons in propane gas. Conventionally, such states are converted into a strong NMR signal enhancement by transferring the reaction product to a high magnetic field in an adiabatic longitudinal transport after dissociation engenders net alignment (ALTADENA) experiment. However, the relaxation time T₁ of ～0.6 s of the resulting hyperpolarized propane is too short for potential biomedical applications. The presented alternative approach employs low‐field MRI to preserve the initial correlated state with a much longer decay time T_LLSS=(4.7±0.5) s. While the direct detection at low‐magnetic fields (e.g. 0.0475 T) is challenging, we demonstrate here that spin‐lock induced crossing (SLIC) at this low magnetic field transforms the long‐lived correlated state into an observable nuclear magnetization suitable for MRI with sub‐millimeter and sub‐second spatial and temporal resolution, respectively. Propane is a non‐toxic gas, and therefore, these results potentially enable low‐cost high‐resolution high‐speed MRI of gases for functional imaging of lungs and other applications.     

防污染的自消应力高纯度气体低温换热器的设计

该设计解决了低温工程与低温技术等领域所使用的高纯度气体介质换热的要求,具有显著的经济效益和社会效益。其换热器是由四个管壳式热交换器串联组合而成,壳体呈窄矩形,换热管采用U形换热管,四个管壳式热交换器呈方阵置放在低温换热器筒体内。低温换热器采用的材料是0Cr18N i9/304,该种材料的透气性小、耐磨损、抗腐蚀能力强和性能稳定,防止了气体被污染。另外在低温下,考虑了材料的热胀冷缩所产生的应力,使应力能够自行消除,提高了它的密封性能,最终使低温换热器密封性能好,防止了气体被污染,保证了气体的高纯度。     

The application of the Lattice Boltzmann method to the one-dimensional modeling of pulse waves in elastic vessels

The one-dimensional nonlinear equations for the blood flow motion in distensible vessels are considered using the kinetic approach. It is shown that the Lattice Boltzmann (LB) model for non-ideal gas is asymptotically equivalent to the blood flow equations for compliant vessels at the limit of low Knudsen numbers. The equations of state for non-ideal gas are transformed to the pressure-luminal area response. This property allows to model arbitrary pressure-luminal area relations. Several test problems are considered: the propagation of a sole nonlinear wave in an elastic vessel, the propagation of a pulse wave in a vessel with varying mechanical properties (artery stiffening) and in an artery bifurcation, in the last problem Resistor–Capacitor–Resistor (RCR) boundary conditions are considered. The comparison with the previous results shows a good precision.     

硝酸镁对GFAAS法测定微量铍的基体改进效应

以硝酸镁作为GFAAS法测量微量铍的基体改进剂,研究了硝酸镁对石墨炉灰化和原子化的影响,探讨了硝酸镁的作用机理.结果表明,硝酸镁能提高灰化温度,降低原子化活化能,并对吸收信号有延迟作用,从而有利于消除基体干扰,提高分析灵敏度.     

On the derivation of the entropy of ideal quantum gases confined in a three-dimensional harmonic potential

In this work,the entropy functions of ideal quantum gases in a three-dimensional harmonic trap are analytically calculated using temperature as an explicit variable.Afterward,the applicability of the analytical formulas is validated by comparison with the numerical calculation.The results illustrate that the obtained functions could be applied for the whole temperature regime with a maximum relative deviation of less than 7.5%in the vicinity of the critical temperature Tcin the case of Bose gases.Meanwhile,for Fermi gases,although the analytical formula fits well at very low-and high-temperature regimes,it cannot be applied at temperature in the range[0.3-0.5]T_F,where T_F is the Fermi temperature.In addition,the consistency between our formulas and classical ones at significantly high temperatures is also discussed.     

A New Model for the Genesis of Natural Gases--Multi-source Overlap, Multi-stage Continuity, Type Controlled by Main Source and Nomenclature by Main Stage (Ⅰ)--Multi-source Overlap and Type Controlled by Main Source

Based on the geochemical studies of natural gases in the past ten years in China, the authors have proposed a new model for their genesis--multi-source overlap, multi-stage continuity, main source-controlling type and nomenclature by the main stage.Multi-source refers to a diversity of material sources involved in the formation of natural gases, including abiogenic and biogenic material sources. In regard to biogenic sources, either oil-generating or coal-generating organic matter would produce gaseous hydrocarbon reservoirs of commercial importance. Generally, natural gases originating from these sources can overlap to form gas reservoirs. Under specific circumstances mantle-source abiogenic gases could overlap biogenic gases to form gas reservoirs. In nature, natural gases predominated by gaseous hydrocarbons may be formed from a single end-member source. However, multi-source overlap is more typical of the genesis of natural gases.