Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Funktionalisierte Alkinkomplexe von Wolfram(VI). Synthese und Kristallstrukturen von [WCl4(Et?Se?CC?Se?Et)(THF)] und [WCl4(Et?Te?CC?Te?Et)(THF)]

Functionalized Alkyne Complexes of Tungsten(VI). Syntheses and Crystal Structures of [WCl₄(Et? Se? C?C? Se? Et)(THF)] and [WCl₄(Et? Te? C?C? Te? Et)(THF)] The title compounds have been prepared by reactions of [WCl₄(SEt₂)₂] with the alkynes Et? X? C?C? X? Et (X = Se, Te) in CCl₄ solution and subsequent addition of tetrahydrofurane. Both complexes were characterized by crystal structure determinations. [WCl₄(Et? Se? C?C? Se? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 2942 unique reflections, R = 0.038. Lattice dimensions at 20°C: a = 934.2, b = 1639.5, c = 1189.5 pm, β = 96.497°. [WCl₄(Et? Te? C?C? Te? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 4097 unique reflections, R = 0.067, Lattice dimensions at ?70°C: a = 899.2, b = 1691.9, c = 1213.3 pm, β = 96.82°. The complexes have monomeric molecular structures with the oxygen atom of the THF molecules in trans-position to the side-on bound alkyne ligands.     

铜(II)-5-取代邻菲啰啉-二氧四胺大环三元体系的稳定性研究

The stability of copper (Ⅱ)-13-(2'-Hydroxy-3',5'-substituted benzyl)-1,4,8,11-tetraazacyclotetradecane-12, 14-dione(RTADO-14) binary complex compounds and of copper (Ⅱ)-5-substituted-1,10-phenanthrolines(R'TADO)-RTADO-14 ternary complex compounds was studied by means of pH titration method at 25.0±0.1 ℃ and I=0.1mol?dm-3KNO3. The formation constants of binary and ternary complexes were obtained. The structures of the binary and ternary complxes and the effects fo substituents on macrocyclic ligands and on R'Phen were also discussed.     

Synthesis of N,N′-dimethyl-N,N′-dibutyl malonamide functionalized polymer and its sorption affinities towards U(VI) and Th(IV) ions

A novel chelating polymeric material was synthesized by chemical anchoring of N,N′-dimethyl-N,N′-dibutyl malonamide (DMDBMA) with chloromethylated polystyrene-divinyl benzene polymer. The polymeric material thus prepared was characterized by ¹³C NMR, FT-IR spectroscopy and CHN elemental analysis. The fabricated polymeric material exhibited superior binding for hexa-valent and tetra-valent metal ions such as U(VI) and Th(IV). Various physico-chemical properties of the functionalized polymer like phase adsorption kinetics, metal sorption mechanism and metal sorption capacity was studied in the static method. Adsorption kinetics studies show that <20 min was sufficient for >99.99% adsorption of Th(IV) and U(VI). The kinetics for adsorption of U(VI) and Th(IV) was found to follow the first order Lagergren rate kinetics. Adsorption of U(VI) on the malonamide functionalized polymer followed the Langmuir adsorption isotherm. The Langmuir monolayer adsorption phenomenon was also confirmed by the theoretical approach calculated based on the adsorption kinetics. The metal sorption capacities for uranium and thorium were found to be 18.78 ± 1.53 mg and 15.74 ± 1.59 mg/g of the chelating polymer at 3 M HNO₃, respectively.     

Finkelstein Reaction in Functionalized Crown-ether Ionic Liquids

Recent years, crown ethers have been used in many fields, including phase transfer catalysis, chromatography stationary phase, ionselective electrode, and concentration of metal ions, etc1.. However, the toxicity of free crown ethers makes them unsuitable for industrial use2. Introduction of a crown ether as a functional group to functionalized ionic liquids has been reported3. These functionalized ionic liquids will combine the excellent properties of crown ether and ionic liquids without los…     

CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料，如煤、石油和天然气的非常规气体. 作为可得的清洁能源，它的利用被认为是节能和经济的选择. 在本工作中，非金属原子X(X=H，O，N，S，P，Si，F，Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄，CO₂，H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中，H和Cl对CH₄的作用较大； N、O、F、Cl对CO₂的作用较强； N，Cl对H₂O的影响不容忽视. 总的来说，吸附能大小依次为：H₂O>CO₂>CH₄. 因此，在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附，进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情，并为煤层瓦斯的开采与分离提供了有用的信息.     

CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料，如煤、石油和天然气的非常规气体. 作为可得的清洁能源，它的利用被认为是节能和经济的选择. 在本工作中，非金属原子X(X=H，O，N，S，P，Si，F，Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄，CO₂，H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中，H和Cl对CH₄的作用较大； N、O、F、Cl对CO₂的作用较强； N，Cl对H₂O的影响不容忽视. 总的来说，吸附能大小依次为：H₂O>CO₂>CH₄. 因此，在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附，进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情，并为煤层瓦斯的开采与分离提供了有用的信息.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

(R)-2,3-Cyclohexylideneglyceraldehyde, a novel template for facile and simple entry into chiral hydroxy γ-lactones: synthesis of (−)-muricatacin

(R)-2,3-Cyclohexylideneglyceraldehyde 1 has been used in a simple and efficient synthesis of (−)-muricatacin 10. The required chiron, syn-alkanetriol 2a was prepared by the reduction of a ketone 3 derived from 1.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.