功能性CdTe纳米晶的合成及自组装膜的发光性质

以巯基乙酸为稳定剂和修饰剂,采用湿化学法合成了功能性CdTe纳米晶;用X射线衍射（XRD）、选区电子衍射（SAED）和高分辨透射电镜（HRTEM）表征其粒度和形貌,制得的CdTe为立方单晶,近似呈球形,分散性较好,粒径约40-70nm;通过CdTe纳米晶与阳离子聚电解质聚二烯丙基二甲基氯化铵（PDDA）之间的静电相互作用,在石英基片表面通过静电自组装方法制备了多层CdTe纳米晶薄膜,以荧光分光光度计、UV-Vis和场发射扫描电子显微镜（SEM）测试手段对所得的CdTe纳米晶薄膜进行了表征;结果表明：所得CdTe-PDDA复合膜组装有序,分布均匀,该复合膜的荧光强度随着组装层数的增加而呈线性增强,具有良好的光致发光性,在554nm附近有绿色荧光发射。     

Design of a new technique based on combination of ultrasound waves via magnetite solid phase and cloud point microextraction for determination of Cr(III) ions

In this work, we focused on development of a new techniques by coupling of ultrasound irradiation, cloud point method and magnetite solid phase microextraction for the extraction and preconcentration of Cr(III) ions from aqueous solutions. In order to reduce cost and improve practicability of proposed process a new efficient and regenerable magnetite sorbent (functionalized chitosan grafted-amino graphene oxide (GO) decorated by zinc ferrite nanoparticles (CS-GO-Zn: Fe₂O₄)) was synthesized through hydrothermal method and then characterized by FT-IR, FE-SEM, EDS and XRD analysis. Effect of initial sample volume and type, volume and concentration of eluent on the ER%_Cr(III) were investigated and optimized using one at a time method. Correlation between the main and interaction effects of other operational parameters such as Cr(III) ion concentration, CS-GO-Zn: Fe₂O₄ mass, sonication time, pH and solution temperature on the ER%_Cr(III) were investigated and optimized by central composite design coupled with desirability function approach. The results revealed that there were significant effects for most investigated terms on the ER%_Cr(III) and maximum ER% of 88.09% was obtained in desirability value of 1.0. This maximum efficiency was obtained at 0.035 µg/mL Cr(III) ion concentration, 40.16 °C temperature, 0.016 g of CS-GO-Zn: Fe₂O₄, pH 6.36 and 9.20 min sonication time. In addition, under the optimal conditions the linear range, limit of detection, enrichment factor and relative standard deviation were found to be 0.02–4.4 µg/mL, 0.002 µg/mL, 23.23 and 1.68% respectively. Finally, the method was successfully applied to the separation and preconcentration of Cr(III) ion from tap, river and mineral waters.     

功能化烯胺的合成(Ⅳ):醋酸钠快速促进β,β-二氰基苯乙烯衍生物与NBS反应转变成相应的烯胺

建立了由缺电子烯烃(β,β-二氰基苯乙烯衍生物)与N-溴代丁二酰亚胺(NBS)反应快速转变成功能化烯胺的新方法.缺电子烯烃在N,N-二甲基酰胺(DMF)溶剂中,在NaOAc促进下与NBS反应,可快速转变成相应的烯胺.在优化的条件下,考察了12种β,β-二氰基苯乙烯衍生物与NBS的反应情况,各种β,β-二氰基苯乙烯衍生物均能转变成相应的烯胺,证明该方法具有广泛的适应性.该方法操作简单,反应条件温和,反应收率高(最高收率可达98%).所用催化剂易得、稳定,价格低廉,并且反应具有高度的区域选择性,为合成功能化烯胺提供了一个有效途径.所有产物结构均经过核磁共振波谱和高分辨率质谱确证.     

Synthesis of AB2 miktoarm star-shaped copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with two initiating groups for atom transfer radical polymerization (ATRP), 4-(2,2-bis-(methyl 2-bromo isobutyrate)-propionyloxy)-2,2,6,6-tetramethyl-1-piperidinyloxy (Br₂-TEMPO), was synthesized by reacting 4-hydroxyl-2,2,6,6-tetramethyl-1-piperidinyloxy with 2,2-bis-(methyl 2-bromo isobutyrate) propanoic acid. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br₂-TEMPO. The obtained polystyrene had two active bromine atoms for ATRP at the ω-end of the chain and was further used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare AB₂-type miktoarm star-shaped copolymers. The molecular weights of the resulting miktoarm star-shaped copolymers at different monomer conversions shifted to higher molecular weights without any trace of the macroinitiator, and increased with monomer conversion.     

Our expedition in the construction of fluorescent supramolecular metallacycles

This review summarized our efforts in the development of fluorescent supramolecular metallacycles.     

Highly selective olefin epoxidation with manganese triazacyclononane complexes: Impact of ligand substitution

Manganese complexes of 1,4,7-triazacyclononane with different substituents catalyze the selective epoxidation of a large number of olefins to epoxides with H₂O₂. The activities of complexes with methyl (L₁), 2-hydroxybutyl (L₂) and acetato (L₃) substituents are compared. The effects of solvent and temperature on the epoxide yield are very different for the three complexes. It is proposed that these differences are related to the binding of the pendant arms in Mn---L₂ and Mn---L₃ complexes. In general, acetone or methanol are preferred solvents. Variations of stereoretention are also observed: with Mn---L₁ in acetone, isomer scrambling occurs, while with Mn---L₁ in methanol, the epoxidation is almost stereospecific. UV-visible and electron spin resonance spectroscopy are used to characterize the state of manganese under oxidizing conditions.     

A New Silver(I) Potentiometric Sensor Based on a Calix[4]arene Substituted at the Narrow Rim by Amide/Phosphoryl Groups

A coated‐wire type silver ion‐selective electrode has been constructed using a modified p‐tert‐butyl‐calix[4]arene by amide‐phosphoryl groups, named 5, 11, 17, 23‐tetra‐tert‐butyl‐25, 27‐bis(diethylcarbamoylmethoxy)‐26,28‐bis(diphenylphosphinoylmethoxy)calix[4]arene (Calix), as neutral carrier. A plasticized PVC membrane containing 30% PVC, 60% ortho‐nitrophenyloctylether (NPOE), 2% sodium tetraphenylborate (NaTPB) and 8% “Calix” was coated on a graphite rod. The prepared electrode exhibited a linear Nernstian response over the range 1 × 10^?6 to 1 × 10^?2 M with a slope 58.4 (±0.2) mV per decade change and a detection limit of 6.3 × 10^?7 M. The working pH range of the sensor is 4‐6.7. It is found that the dynamic response time of the electrode to achieve a steady potential was very fast (～11 s). The selectivity of the sensor relative to NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Pb²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺ and Th⁴⁺ was examined. The prepared electrode exhibits adequate stability with good reproducibility (57.6 ± 0.5 mV per decade change for 10 weeks). It was successfully used as an indicator electrode in potentiometric titration of silver ions with standard solution of EDTA. The sensor was also used for silver ion measurements in various synthetic samples.     

Voltammetric Sensing of Trace Metals at a Poly(pyrrole‐malonic acid) Film Modified Carbon Electrode

The oxidative electropolymerization of the (3‐pyrrol‐1‐ylpropyl)malonic acid monomer 1 is a simple and reproducible one‐step procedure for the synthesis of complexing polymer film modified electrodes, which have been applied to the electroanalysis of Cu(II), Pb(II), Cd(II) and Hg(II) ions by preconcentration upon complexation, followed by anodic stripping analysis. The detection limits were determined from square‐wave voltammetry at 0.5 nM, 5 nM, 50 nM and 0.2 μM for Pb(II), Cu(II), Hg(II) and Cd(II), respectively, after 10 min preconcentration. The modified electrodes showed a better selectivity toward copper(II) ions. Analysis of copper in a tap water sample agreed well with ICPMS analysis results.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

A NEW TYPE OF CROWN FUNCTIONALIZED POLYSILOXANE AND ITS PLATINUM COMPLEX

A new type of crown functionalized polysiloxane, in which the crown moieties were incorporated into main chain, and its platinum complex were synthesized. The polysiloxane was synthesized from 3, 16-dihydroxy-1- thia - 5, 8, 11, 14- tetraoxacycloheptadecane via etheritication with ω-chloroundecene, followed by hydrosilylation with triethoxysilane, cohydrolysis with D_4, sequentially. Treating the polysiloxane with potassium cholroplatinite, the title complex was obtained. It was found that the platinum complex exhibited high catalytic activity in the hydrosilylation of olefins with triethoxysilane.