Hydrogel nanonetworks with functional core-shell structure

Nanohydrogel particles of poly(acrylonitrile-co-N-isopropylacrylamide (p(AN-c-NIPAM)) were synthesized using a microemulsion polymerization technique. Highly monodisperse nanohydrogel particles e.g. 50-150 nm, and various morphology such as core-shell and connected beads were obtained. It was shown that the shell thickness and the size of particles can be tuned by the monomer concentrations and their ratios as well as by the utilization of different crosslinkers. The hydrophobic core monomer, AN was converted to amidoxime groups to increase the hydrophilicity of the nanogels which provide more hydrophilic character and impart new functionality to the nanonetwork. Transmission electron microscopy (TEM), and dynamic light scattering (DLS) techniques were employed for the particle size characterizations. The amidoximation reaction was confirmed by FT-IR spectroscopy.     

取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学

取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学张志英，赵家森（天津纺织工学院材料科学系天津３００１６０）关键词取向高聚物，聚对苯二甲酸乙二酯，非等温结晶，结晶动力学研究高聚物结晶动力学常用的等温方法有光透射法、密度法、显微镜法、Ｘ－射线衍射法、差示扫描...     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

具有六重穿插非中心对称金刚石网络结构的Cd(Ⅱ)和Zn(Ⅱ)的配位高聚物(英)

利用1，4-二-(4-羧基吡啶基)丁烷(L)合成了两个新的三维配位聚合物{(CdL₂)·4H₂O·2ClO₄}_n 1和{(ZnL₂)·4H₂O·2ClO₄}_n 2。单晶X-射线结构分析表明，1和2具有相同的计量式，但其晶体属于不同的空间群(1属于P4n2，2属于P4₂22)。两种配合物中，每个金属离子分别由配体与四个相邻的金属离子连接，从而形成具有六重穿插的金刚石网络结构，其网络中大的空腔被高氯酸根离子和(H₂O)₄分子簇所占据。     

Mechanical analysis on rocket propellants

The mechanical properties of solid rocket propellants are very important for good functioning of rocket motors. During use and storage the mechanical properties of rocket propellants are changing, due to chemical and mechanical influences such as thermal reactions, oxidation reactions or vibrations. These influences can result in malfunctioning, leading to an unwanted explosion of the rocket motor. Most of modern rocket propellants consist of a polymer matrix (i.e. HTPB) filled with a crystalline material (i.e. AP, AN). However, the more conventional double base propellants consist of a solid gel matrix with additives, such as stabilizers. Both materials show a mechanical behaviour, quite similar to that of general polymers. To describe the material behaviour of both propellants a linear visco-elastic theory is often used to describe the mechanical behaviour for small deformations. Because the time-temperature dependency is also valid for these materials a mastercurve can be constituted. With this mastercurve the response properties (stiffness) under extreme conditions can be determined. At TNO-PML a mastercurve of a double base propellant was constituted using dynamical mechanical analysis (DMA) and compared with a mastercurve reduced from conventional (static) stress relaxation tests. The mechanical properties of this double base propellant determined by DMA were compared with conventional (quasi-static) tensile test results. This revised version was published online in July 2006 with corrections to the Cover Date.     

聚（2,5—二甲氧基对苯乙炔）的可溶性前聚物合成及表征

研究了合成聚（２，４－二甲氧基对苯乙炔）的有机可溶性前聚物的反应条件与单体转化率和前聚物产率的关系。实验结果表明：ＮａＯＨ是聚合反应的有效引发剂，适宜的反应条件为：单体与ＮａＯＨ摩尔比为１：１，单体浓度０．０５－０．２ｍｏｌ／Ｌ，聚合时间２ｈ，温度低５℃，正己烷、石油醚作为有机提取剂可有效提高前聚物产率。用ＩＲ、ＵＶ－Ｖｉｓ＇＾ＨＮＭＲ，ＴＧＡ和 ＤＳＣ对前聚物进行了表征。     

Hydrothermal Synthesis and Crystal Structure of a Novel Isophthalate-bridged Copper(II) Polymer with Two-dimensional Network Structure: [Cu_2(phen)(ipt)_2]_(2n)·nH_2O (ipt = isophthalate, phen = 1,10-phenanthroline)

1 INTRODUCTION donor due to the presence of the protonated carboxyl group; (d) it can form short bridges via one car- Coordination polymers are of great interest due to boxylato end or long bridges via the benzene ring[7]. their physical properties and potential applications in We believe that coordination functionality of isoph- functional materials[1~3]. Aromatic polycarboxylic acids thalate can lead to interesting structures. In this com- such as 1,2,4,5-benzenetetracarboxylic acid[4],…     

炭黑填充聚乙烯材料电阻—温度特性研究

研究了炭黑／聚乙烯导电复合材料的ＰＴＣ特性及在不同条件下的电阻变化。发现ＰＴＣ特性与体积膨胀及聚乙烯晶相的熔融有许多一致性。认为材料的体积膨胀及聚乙烯晶相熔融时炭黑颗粒均匀化扩散导致了电阻随温度上升。在较高温度下，炭黑颗粒在分子链段热运动的推动下会发生相对聚集使电阻不断减小，这是材料出现ＮＴＣ现象的原因。材料总的电阻温度特性是体积膨胀、炭黑向聚乙烯熔融区扩散及相互聚集三个因素共同作用的结果。     

高分子基PTC复合材料的研究及其应用

本文概述了高分子基PTC复合材料最近的研究动态，阐述了其作为热敏材料在自控温加热系统和过流保护元件方面的广泛应用。     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.