新型1,1-双二茂铁基丁烷衍生物的合成

1,1-双二茂铁基丁烷和乙酸酐经Friedel-Crafts酰基化反应得6-乙酰基-1,1-双二茂铁基丁烷(2);2经LiAlH4还原得6-α-羟乙基-1,1-双二茂铁基丁烷(3);3经消除反应合成了6-乙烯基-1,1-双二茂铁基丁烷(4)。2~4为新化合物,其结构经1H NMR,IR,MS和元素分析表征。     

3,3'-(苯亚甲基)双吲哚的制备―一个推荐的有机化学合成实验

本文介绍了3,3’-(苯亚甲基)双吲哚的制备和柱层析分离实验的原理和操作步骤。该实验具有以下特点:(1)反应时间短,30min左右便可完成;(2)产物为粉红色,在进行硅胶板层析和层析柱时比较直观,适合于学生的实验教学;(3)反应物、催化剂和产物的极性相差很大,容易进行柱层析分离产物。该实验特别适合于综合性大学和地方高等师范院校化学和相关本科专业的"有机化学实验"或"综合化学实验"进行开设。     

Probing Substrate/Catalyst Effects Using QSPR Analysis on Friedel-Crafts Acylation Reactions over Hierarchical BEA Zeolites

Attempts to optimize heterogeneous catalysis often lack quantitative comparative analysis. The use of kinetic modelling leads to rate (k) and relative sorption equilibrium constants (K), which can be further rationalized using Quantitative Structure-Property Relationships (QSPR) based on Multiple Linear Regressions (MLR). Friedel-Crafts acylation using commercial and hierarchical BEA zeolites as heterogeneous catalysts, acetic anhydride as the acylating agent, and a set of seven substrates with different sizes and chemical functionalities were herein studied. Catalytic results were correlated with the physicochemical properties of substrates and catalysts. From this analysis, a robust set of equations was obtained allowing inferences about the dominant factors governing the processes. Not entirely surprising, the rate and sorption equilibrium constants were found to be explained in part by common factors but of opposite signs: higher and stronger adsorption forces increase reaction rates, but they also make the zeolite active sites less accessible to new reactant molecules. The most relevant parameters are related to the substrates’ molecular size, which can be associated with different reaction steps, namely accessibility to micropores, diffusion capacity, and polarizability of molecules. The relatively large set of substrates used here reinforces previous findings and brings further insights into the factors that hamper/speed up Friedel-Crafts reactions in heterogeneous media.     

三氟甲基磺酸锌催化选择性合成2-苄基-4-氯苯酚

在温和条件下,Zn(OTf)2能有效催化氯化苄对对氯苯酚的C-苄基化反应,选择性合成杀菌剂2-苄基-4-氯苯酚（BCP）,合成的优化条件为n(对氯苯酚):n(氯化苄)=1.2:1,催化剂Zn(OTf)2对氯化苄摩尔分数为5%,60 ℃下反应6 h,用硝基甲烷为溶剂,氯化苄转化率和产物BCP的产率分别＞99%和94%。     

以苯为模块自组装合成碳纳米片

在300 ℃苯溶剂中, 以无水三氯化铝为催化剂, 以苯和六氯乙烷为碳源, 基于傅克烷基化反应生成三氯乙烯苯, 并以之为模块自组装合成了具有叠层结构的碳微米颗粒, 其层片厚度为300～500 nm. 进而在反应体系和反应条件不变的情况下, 通过引入铝粉颗粒作为基底成功地诱导出厚度为30～50 nm的碳纳米片. 实验结果表明, 所得碳材料由纳米石墨微晶和非晶碳组成. 文中探讨了叠层结构的台阶长大机制, 以及碳纳米片在铝粉表面的异质形核机制.     

侧链含8-羟基喹啉铝配合物的聚苯乙烯的合成与发光性能研究

通过高分子反应法研究制备了高分子化的8-羟基喹啉铝发光材料.首先使用自制的氯甲基化试剂1,4-二氯甲氧基丁烷(BCMB),制备了5-氯甲基-8-羟基喹啉(CHQ);通过聚苯乙烯(PS)与CHQ之间的Friedel-Crafts烷基化反应,制得侧链键合有8-羟基喹啉(HQ)的改性聚苯乙烯HQ-PS;再使HQ-PS与二配体...     

新方法合成4-氰基-1-茚酮

以邻氰基氯苄和丙二酸二乙酯为原料,经缩合、碱水解、脱羧和Friedel-Crafts酰化反应合成了4-氰基-1-茚酮,总收率32.1%,其结构经1H NMR和13C NMR确证。     

Toward the total synthesis of elisapterosin B: A Hg(OTf)(2)-promoted diastereoselective intramolecular Friedel-Crafts alkylation reaction

As part of an approach to the synthesis of the antitubercular agent elisapterosin B, we prepared two different chiral, non-racemic olefinic substrates and examined their diastereoselective ring closure using mercury salts. The effort yielded potential precursors to elisapterosin B in good yield with good to excellent diastereocontrol.     

芴2,7位取代的9,9’-二芳基螺芴类化合物的合成及性能

设计并合成了一系列以三苯胺为核,芴衍生物为外围基团的有机蓝光小分子,该合成通过Suzuki反应在9-芳基芴的2位和(或)7位引入相同或不同取代基作为模块,并利用Friedel-Crafts反应将4-甲基三苯胺与这一系列模块结合.用NMR,MS和元素分析进行结构表征.荧光测试结果表明该类化合物溶液的荧光发射波长范围在442～466 nm之间,属蓝光发射.电化学测试显示该类材料的HOMO能级位于-5.15～-5.19 eV之间.差示扫描量热仪与热重分析得出化合物的玻璃化转变温度在166℃以上,热分解温度高于398℃,表明该类材料具有良好的热稳定性.     

Sulfonylation of arenes with sulfonamides

In the presence of triflic anhydride, sulfonylation of arenes with sulfonamides proceeded smoothly in Cl₂CHCHCl₂ at 80-140 °C, which gave rise to the desired products in good to excellent yields.