Characterization of measures by potentials

Let μ be a measure in a Banach spaceE, f be an even function onR. We consider the potentialg(a)=f _E f(‖x?a‖)dμ(x). The question is as follows: For whichf does the potentialg determine μ uniquely? In this article we give answers in the cases whereE=l _∞ ⁿ and wheref(t)=|t| ^p andE is a finite dimensional Banach space with symmetric analytic norm. Calculating the Fourier transform of the functionf(‖x‖ _∞) we give a new proof of the J. Misiewicz's result that the functionf(‖x‖ _∞) is positive definite only iff is a constant function.     

On pasting -weights

Theorem 3 gives a condition when two -weights can be ``pasted' together to yield another -weight. It is subsequently used in Example 6 to give an example that shows that a necessary condition by Gohberg, Krupnik, and Spitkovsky is not sufficient.

     

In situ FTIR diagnostics of the radio-frequency plasma decomposition of N2O

The decomposition of N₂O in a 13.56-MHz parallel-plate system was studied usingin situ Fourier transform infrared (FTIR) spectroscopy. Areas of two infrared absorption bands of N₂O recorded at 8 cm^–1 resolution were used to estimate relative gas-phase dissociation as a function of rf power and flow rate at 500 mT. Flow rate was found to strongly affect band areas over the range of powers investigated (10–90 W). The effect of rf power on band areas diminished above 40 W, probably due to poor plasma confinement. Distortion of the band shapes by the plasma permitted rotational temperatures to be estimated. Rotational temperature increased essentially linearly with power at constant flow rate, reaching 450 K at 80 W, but was independent of flow rate at constant power. Rotational temperatures were also found to depend on the temperature of the electrodes, which were heated by plasma exposure. No infrared-active product species were observed even under batch conditions where all N₂O was irreversibly dissociated. This lack of detectable products and a 50% pressure rise observed in a batch study suggest that N₂ and O₂ are the primary stable discharge products.     

Analyzing electrochemical noise with Chebyshev’s discrete polynomials

The principles underlying a novel method intended for analyzing experimental data obtained when studying fluctuation processes are considered. The method in question is Chebyshev’s spectroscopy. The application of this method allows one to determine statistic characteristics of steady-state electrochemical noise against the background of severe deterministic interference without invoking the procedure of the fitting of the initial data. The potentialities of this novel method, which is intended for treating noise experiment, are demonstrated by examining model examples and analyzing the electrochemical noise generated by a lithium electrode placed in an aprotic organic electrolyte.     

傅里叶变换红外光谱和傅里叶变换拉曼光谱法无损鉴别药材的真伪

利用傅里叶变换红外（FT-IR）和近红外傅里叶变换拉曼（NIR FT-aman）光谱法对大黄（西宁大黄）与伪品大黄（华北大黄、山大黄、水根大黄）进行了无损快速的鉴别。结果表明：尽管正品大黄与伪品大黄差别较小，有大部分的化学成分有很大的相同之处，但在红外、拉曼谱图中各自的特征峰较突出，根据谱峰的强度和位置可容易地将它们区别开来。红外和拉曼光谱法相互印证，相互补充，具有快速、准确、操作简单、重复性好、不需对样品进行分离提取，可直接鉴别等特点。     

Quality control of Metamitron in agrochemicals using Fourier transform infrared spectroscopy in the middle and near range

Two vibrational spectrometry-based methodologies were developed for Metamitron determination in pesticide formulations. Fourier transform-middle infrared (FT-MIR) procedure was based on the extraction of Metamitron by CHCl₃ and latter determination by peak area measurement between 1556 and 1533 cm⁻¹, corrected with a two points baseline established from 1572 to 1514 cm⁻¹. Fourier transform-near infrared (FT-NIR) determination was made after the extraction of Metamitron in acetonitrile and measuring the peak area between 6434 and 6394 cm⁻¹ corrected using a two points baseline defined between 6555 and 6228 cm⁻¹. Repeatability, as relative standard deviation, of 5 independent measurements at mg g⁻¹ concentration level, of 0.16% and 0.07% for MIR and NIR and a limit of detection of 0.03 and 0.004 mg g⁻¹ were obtained for MIR and NIR, respectively.NIR determination provides a sample frequency of 120 h⁻¹, higher than that found by MIR and liquid chromatographic methods (60 and 15 h⁻¹, respectively). On the other hand, the NIR method reduces the solvent consumption and waste generation, to only 1 ml acetonitrile per sample as compared with 3.4 ml chloroform required for the MIR determination and 60 ml acetonitrile used in the chromatographic reference procedure. So, vibrational procedures can be considered serious alternatives to long and time consuming chromatographic methods usually recommended for quality control of commercially available pesticide formulations.     

红外光谱法在双亲性化合物水溶液体系研究中的应用

浓度，温度，压力，体系组分及不同分子间相互作用等因素对双亲性化合物分子在水溶液体系中的聚集状态及相变过程均有影响。本文综述了富里叶变换红外光谱方法在这一研究领域内应用十余年间的研究进展。     

On assignment of fundamental vibrational modes of hypophosphite anion and its deuterated analogue

Results of ab initio and density functional theory calculations on the structure and vibrational frequencies of hypophosphite anion indicate earlier experimental assignments of the fundamental vibrational modes are correct while the recent reassignments of several modes proposed by Bickley et al. are inconsistent with the calculated results.     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

Fourier transform infrared spectroscopy and the analytical study of works of art for purposes of diagnosis and conservation

This paper is a study of the analytical capacity of Fourier transform infrared spectroscopy (FT-IR) for any type of samples from works of art. The analytical information obtained with this technique on organic and inorganic compounds is extremely useful in the preliminary studies necessary for diagnosis and to decide on the conservation process. This paper reports the analysis and study with FT-IR on samples extracted from the microlayers in several works of art from different periods (16th to 18th century) comprising wall paintings and canvas. The most outstanding of these being the frescoes by A. Palomino from two ceilings in the Santos Juanes church. The analytical procedures for the different components of the works studied such as

1. (a) varnish applied to wood panels and canvas paintings,

2. (b) binding media and pigments used by the artists,

3. (c) inerts, mortars, stuccos and grounds have been optimized. The FT-IR technique offers a quick analysis of microsamples (less than 0.5 mg) and is able to characterise the different molecular groups which provide information on the nature of the different materials of organic and inorganic origin used by the artist and thus permits the diagnosis of pathologies requiring conservation treatment.