基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

Joint L1/Lp-regularized minimization in video recovery of remote sensing based on compressed sensing

L₁ regularization and L_p regularization are proposed for processing recovered images based on compressed sensing (CS). L₁ regularization can be solved as a convex optimization problem but is less sparse than L_p (0 < p < 1). L_p regularization is sparser than L₁ regularization but is more difficult to solve. This paper proposes joint L₁/L_p (0 < p < 1) regularization, which combines L_p regularization and L₁ regularization. This joint regularization is applied to recover video of remote sensing based on CS. Joint regularization is sparser than L₁ regularization but is as easy to solve as L₁ regularization. A linearized Bregman reweighted iteration algorithm is proposed to solve the joint L₁/L_p regularization problem. The performance and capabilities of the linearized Bregman algorithm and linearized Bregman reweighted algorithm for solving the joint L₁/L_p regularization model are analyzed and compared through numerical simulations.     

Immobilization of AIEgens into metal‐organic frameworks: Ligand design,emission behavior,and applications

Aggregation‐induced emission (AIE), in which the luminophores are highly emissive in aggregate state, is one of the most unique photophysical phenomena and has shown interesting applications in many areas. The immobilization of AIE luminogens (AIEgens) into metal‐organic frameworks (MOFs), which are inorganic‐organic hybrid porous materials with tunable and predictable structures, has been investigated over the past few years. These well‐defined porous frameworks cannot only provide an ideal platform for studying the mechanism of AIE phenomenon in solid state, but also show potential applications from sensing to white light‐emitting diodes. In this highlight, we will summarize the recent progress of AIEgens‐based MOFs, including ligand design, emission behavior, and applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1809–1817     

Investigation of entrance effects on particle electrophoretic behavior near a nanopore for resistive pulse sensing

Resistive pulse sensing using solid-state nanopores provides a unique platform for detecting the structure and concentration of molecules of different types of analytes in an electrolyte solution. The capture of an entity into a nanopore is subject not only to the electrostatic force but also the effect of electroosmotic flow originating from the charged nanopore surface. In this study, we theoretically analyze spherical particle electrophoretic behavior near the entrance of a charged nanopore. By investigating the effects of pore size, particle–pore distance, and salt concentration on particle velocity, we summarize dominant mechanisms governing particle behavior for a range of conditions. In the literature, the Helmholtz–Smoluchowski equation is often adopted to evaluate particle translocation by considering the zeta potential difference between the particle and nanopore surfaces. We point out that, due to the difference of the electric field inside and outside the nanopore and the influence from the existence of the particle itself, the zeta potential of the particle, however, needs to be at least 30% higher than that of the nanopore to allow the particle to enter into the nanopore when its velocity is close to zero. Accordingly, we summarize the effective salt concentrations that enable successful particle capture and detection for different pore sizes, offering direct guidance for nanopore applications.     

Perimidine-based synthetic receptors for determination of copper(II) in water solution

Perimidine-based chelators 1 and 2 were prepared, and their structures were confirmed by ¹H and ¹³C NMR, MS spectroscopy and elemental analysis. These compounds were studied as specific synthetic receptors for the recognition of transition metal ions. They exhibited high affinity and selectivity towards Cu(II) ions. The conditional binding constants, linear dynamic range and detection limit were determined by UV–vis spectroscopy. These parameters demonstrated high potential of the prepared synthetic receptors for the recognition and determination of Cu(II) ions. The minimum detectable concentrations of Cu(II) ions for the synthetic receptors 1 and 2 were 270 and 75 nM (R ² = 0.9915 and 0.9964) in aqueous medium (water/DMSO; 99:1 (v/v)), respectively.     

New biocidal metal complexes of bisphenol-A formaldehyde polymer containing piperazine

The polymeric ligand (BFP) was synthesized by condensation of bisphenol-A, formaldehyde, and piperazine in alkaline medium at 70–80°C. The polymer–metal complexes were synthesized by the reaction of BFP with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) acetates in 1?:?0.5 (ligand?:?metal) molar ratio. All the synthesized polymers were characterized by elemental, spectral (infrared, ¹H-NMR, and UV-Vis), magnetic moment measurements, and thermal (TGA) analysis. The ligand-field and nephelauxetic parameters have been determined from UV-Vis spectra using ligand-field theory. Elemental analyses indicate the association of water with metal for Mn(II), Co(II), and Ni(II), which is also supported by TGA. The antimicrobial activities of the synthesized polymers were studied by agar well diffusion methods against Bacillus subtilis, Bacillus megaterium, Staphylococcus aureus, Escherichia coli, Salmonella typhi, Pseudomonas aeruginosa, and Shigella boydii. The antimicrobial activity and thermal stability of Cu(II)–polymer were higher than the other polymer–metal complexes due to the higher stability constant of Cu(II).     

Viscometric Estimation of Unperturbed Chain Dimensions of Polymers

A new expression is proposed to determine the unperturbed dimensions of coil-like polymers viscometrically by use of the Flory and Kratky expression. The unperturbed dimensions so estimated are compared with the results obtained by using different expressions available in the literature. The results are comparable even for stiff chain polymers. The data obtained under theta conditions also fit this expression very well. The effect of molecular weight, its distribution, and that of the solvent has also been studied. It is concluded that the unperturbed dimensions are independent of molecular weight and solvent but depend on the heterogeneity of the system.