Evaluation of Formaldehyde in Foundry Waste Sands Using Liquid Chromatography

Abstract

The industrial manufacturing of metallic objects results in a high level of foundry waste sands that may contain toxic compounds such as formaldehyde. The formaldehyde content of foundry waste sands was evaluated by liquid chromatography. Samples were collected during various steps of the industrial processes. Results showed that the phenolic alkaline process generated waste sands with higher formaldehyde content than the furanic process; the highest value was 7.6 × 10^?3% (w/w). In this work, formaldehyde content decreased with time in all of the samples studied, revealing that most formaldehyde was released to the occupational environment.     

Study of flame-retardant finishing of cellulose fibres: Organic–inorganic hybrid versus conventional organophosphonate

The aim of this study was to introduce a non-formaldehyde inorganic–organic hybrid sol–gel flame-retardant precursor (SiOP) containing phosphorous, nitrogen, and silicon and to compare its functional properties with those of the conventional formaldehyde-containing organic flame-retardant agent, organophosphonate (OP). SiOP was used at concentrations of 2%, 4%, and 8%, and OP was used at a concentration of 200 g/dm³. Both agents were applied to 100% cotton (CO) woven fabric by the pad-dry-cure method under the appropriate conditions. The presence of the SiOP and OP coatings on the CO fabric was confirmed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The results of the vertical tests of flammability and the thermogravimetric analyses showed that the presence of the SiOP coating changed the thermal degradation pathway of the CO fabric and resulted in an increase in the thermo-oxidative stability of the cellulose fibres. The thermo-oxidative stability was enhanced by the addition of higher amount of dry solids. At comparable dry solids contents, OP preserved significantly greater flame retardancy and thermo-oxidative stability than did SiOP. These results indicated that the SiOP precursor could not act as an effective alternative to the OP agent in the flame-retardant protection of CO fabric.     

Determination of Formaldehyde Traces in Fabric and in Indoor Air by a Kinetic Fluorimetric Method

A simple and sensitive kinetic fluorimetric method is reported for the determination of trace amount of formaldehyde. The proposed method is based on the catalytic effect of formaldehyde on the oxidation reaction of rhodamine B with potassium chlorate in sulfuric acid solution. Formaldehyde in the range of 0.020-0.340 µg/mL can be determined with a limit of detection of 5.73 ng/mL. The method has been used to determine trace formaldehyde in fabric and in indoor air. The results thus obtained show good agreement with those determined by acetyl acetone method.     

Mathematical modeling of a slurry reactor for DME direct synthesis from syngas

In this paper,an axial dispersion mathematical model is developed to simulate a three-phase slurry bubble column reactor for direct synthesis of dimethyl ether(DME) from syngas.This large-scale reactor is modeled using mass and energy balances,catalyst sedimentation andsingle-bubble as well as two-bubbles class flow hydrodynamics.A comparison between the two hydrodynamic models through pilot plantexperimental data from the literature shows that heterogeneous two-bubbles flow model is in better agreement with the experimental data thanhomogeneous single-bubble gas flow model.Also,by investigating the heterogeneous gas flow and axial dispersion model for small bubblesas well as the large bubbles and slurry(i.e.including paraffins and the catalyst) phase,the temperature profile along the reactor is obtained.Acomparison between isothermal and non-isothermal reactors reveals no obvious performance difference between them.The optimum values ofreactor diameter and height were obtained at 7 m and 50 m,respectively.The effects of operating variables on the axial catalyst distribution,DME productivity and CO conversion are also investigated in this research.     

Efficient synthesis of multiply substituted furans using BF@Propyl/dopamine/Pd as a green catalyst

One of the commonly used methods to synthesize furans is the three-component reaction among aromatic aldehyde, arylamine, and acetylenedicarboxylate. The main advantages of this work are easy reaction work-up, short reaction time, high yield and easy recyclability, reusability of the catalyst. And also basalt fiber applications are surely innovative in many industrial and economic fields, because of its good mechanical, chemical and thermal performances.     

New biocidal metal complexes of bisphenol-A formaldehyde polymer containing piperazine

The polymeric ligand (BFP) was synthesized by condensation of bisphenol-A, formaldehyde, and piperazine in alkaline medium at 70–80°C. The polymer–metal complexes were synthesized by the reaction of BFP with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) acetates in 1?:?0.5 (ligand?:?metal) molar ratio. All the synthesized polymers were characterized by elemental, spectral (infrared, ¹H-NMR, and UV-Vis), magnetic moment measurements, and thermal (TGA) analysis. The ligand-field and nephelauxetic parameters have been determined from UV-Vis spectra using ligand-field theory. Elemental analyses indicate the association of water with metal for Mn(II), Co(II), and Ni(II), which is also supported by TGA. The antimicrobial activities of the synthesized polymers were studied by agar well diffusion methods against Bacillus subtilis, Bacillus megaterium, Staphylococcus aureus, Escherichia coli, Salmonella typhi, Pseudomonas aeruginosa, and Shigella boydii. The antimicrobial activity and thermal stability of Cu(II)–polymer were higher than the other polymer–metal complexes due to the higher stability constant of Cu(II).     

Silica Gel Catalyzed Conversion of Dimethyl 2-(5-Bromo-2-hydroxyphenyl)-3-(triphenylphosphoranylidene)butanedioate to Methyl 6-Bromo-2-oxo-2H-chromene-4-carboxylate in Solvent-Free Conditions

Protonation of the highly reactive 1:1 intermediates, produced in the reaction between triphenylphosphine and dimethyl acetylenedicarboxylate, by 4-bromophenol leads to vinyltriphenylphosphonium salt, which undergoes aromatic electrophilic substitution reaction with conjugate base to produce dimethyl 2-(5-bromo-2-hydroxyphenyl)-3-(triphenylphosphoranylidene)butanedioate. Silica gel was found to catalyze conversion of dimethyl 2-(5-bromo-2-hydroxyphenyl)-3-(triphenylphosphoranylidene)butanedioate to methyl 6-bromo-2-oxo-2H-chromene-4-carboxylate in solvent-free conditions at 80°C in fairly high yield.     

Synthesis of oxo-Phosphoranylidene Aminobenzoic Acid Derivatives by a Multicomponent Reaction

2-Aminobenzoic acids or 4-aminobenzoic acid react with dimethyl acetylenedicarboxylate/triphenylphosphine in less than 20 min at 15–25°C to produce new organic phosphorus compounds in good to excellent yields. The conversion occurs with selective N- over O-alkylation of the amino group and isolation of the products is accomplished simply by filtration.     

Reaction of Dimethyl Acetylenedicarboxylate With 2-Mercaptoperimidine and 2-Mercaptobenzimidazole

A mixture of equimolar quantities of dimethyl acetylenedicarboxylate ( 2 ) with either 2-mercaptoperimidine ( 1 ) or 2-mercaptobenzimidazole ( 5 ) was heated in absolute benzene in the presence of triphenylphosphine as a catalyst under reflux conditions for 1 h (the reaction was monitored by TLC until the consumption of the starting materials). The solvent was concentrated under vacuum and the residue was subjected to chromatographic plates using toluene-ethylacetate (2:1) as an eluent. The products in each reaction were separated as two migrating zones. Each zone was removed from the plate and recrystallized from the appropriate solvent. The products of the first reaction are 10-methoxy-11-oxo-11H-8-thia-7,11a-diaza-benzo[de]anthracene-9-carboxylic acid methyl ester ( 3 ) and 8-thia-7,10a-diaza-cyclopenta[a]phenalene-9,10-dicarboxylic acid dimethyl ester ( 4 ), while the products of the second reaction are 3-methoxy-4-oxo-4H-1-thia-4a,9-diaza-fluorene-2-carboxylic acid methyl ester ( 10 ) and benzo[4, 5]imidazo[2,1-b]thiazole-2,3-dicarboxylic acid dimethyl ester ( 11 ). The mechanisms of the observed reactions are suggested.