Synthesis, characterisation and evaluation of polydithiocarbamate resin supported on macroreticular styrene-divinylbenzene copolymer for the removal of trace and heavy metal ions

A new chelating resin was synthesised by the modification of styrene-divinylbenzene (2%) copolymer and incorporation of dithiocarbamate groups. The polydithiocarbamate resin was characterised by elemental analysis, thermal studies and IR studies. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Ni, Pb, Fe, As and Mn determined. The total sorption capacity of the resin was 37 mg g⁻¹ for Ni(II), 35 mg g⁻¹ for Cu(II), 29 mg g⁻¹ for Fe(III) and 23 mg g⁻¹ for Pb(II). The optimum pH for the removal of metal ions was 3-5 for Ni(II), 5 for Cu(II), 4 for Fe(III) and 4-5 for Pb(II). High sorption capacity was observed when compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time t_1/2 values, indicating a better accessibility of the chelating sites.     

MS/MS in structural analysis of an oviposition-deterring pheromone

A recently characterized oviposition-deterring pheromone (ODP, structure 1) of the European cherry fruit fly was used as a test case for probing the potential of tandem mass spectrometry (MS/MS) in structure elucidation as a stand-alone technique. The glycolipid-taurinate 1 was subjected to MS/MS analyses under a variety of conditions with and without preceding chemical degradation. Acidic methanolysis of 1 and subsequent in-batch derivatization (trideuterioacetylation) yielded methyl 2,3,4,6-tetrakis-O-trideuterioacetyl-glucopyranoside (2), methyl 8,15-bis-trideuterioacetoxy-palmitate (3), and taurine (4) as suitable target compounds for direct mixture analysis.Low energy collision induced dissociation (CID) on selected precursor ions (MS/MS on [M + H – CH₃OH]⁺ and [M + H]⁺ produced by fast atom bombardment (FAB)) allowed direct identification of 2 and 4, respectively, by comparison with appropriate reference ions. In the case of 3, low energy CID (desorption chemical ionization (DCI) instead of FAB, MS/MS on [M + H]⁺) permitted deduction of gross molecular structure, but failed to provide positional detail. In sharp contrast,high energy CID of trideuterioacetylated intact 1 (FAB-MS/MS on [M – H]^– ions of la) clearly revealed a linear 8,15-hydroxylated palmitic acid backbone. Less certain was assignment of 15-O-glucosylation by this approach.     

Kinetics and mechanism of the hydrolysis of sodium carboxymethylcellulose (Na-CMC) by a cellulase complex

TheSomogyi-Nelson colorimetric method is applied in a new manner more suitable for evaluating the kinetics of the enzyme hydrolysis of sodium carboxymethylcellulose (Na-CMC) catalyzed by the cellulase complex. By means of selective inhibition of a chosen enzyme from the cellulase complex it became possible to trace the effect of the other enzymes included in its composition.

---

Kinetik und Mechanismus der Hydrolyse von Natriumcarboxymethylcellulose (Na-CMC) durch einen Cellulase-Komplex

Zusammenfassung Die kolorimetrische Methode nachSomogyi undNelson wird nach einem neuen Verfahren zur Verfolgung der Kinetik der hydrolytischen Spaltung von Natriumcarboxymethylcellulose (Na-CMC), katalysiert durch den Cellulase-Komplex, angewandt. Durch selektive Inhibierung eines bestimmten Enzyms des Cellulase-Komplexes kann man die Wirkung der anderen zu seiner gesamten Zusammensetzung gehörenden Enzyme verfolgen.

---

Symbols Used E enzyme (E—cellulase;E—exo-cellobiohydrolase;E—-glucosidase) - [E] _w weight concentration of enzymeE - S substrate (Na-CMC—sodium carboxymethylcellulose) - [S]₀ weight concentration of substrateS - I inhibitor (I—lactose;I—calcium chloride;I—condurrite-B-epoxide) - P product (P—oligosaccharides;P—cellobiose;P—D-glucose) - P end product (K , K , K ) - DP degree of polymerization - DS degree of substitution - ES enzyme-substrate complex (E S, E S, E S) - EP enzyme-product complex (E P, E P) - EI enzyme-inhibitor complex (E I, E I, E I) - M _s molecular mass of substrateS - K _s substrate constant (K _s , K _s , K _s ) - K _I inhibitor constant (K _I , K _I , K _I ) - K _m Michaelis-Menten constant - k ₊₁,k ₊₂ (k ₊₂ ,k ₊₂ ,k ₊₂ ) forward rate constants - k _–1 reverse rate constant - ₀ initial rate of reaction - V maximal reaction rate - A change in absorbance - molar absorption coefficient - wavelength Herrn Prof. Dr.Hans Tuppy zum 60. Geburtstag herzlichst gewidmet.     

应用扫描电化学显微镜研究电子在室温离子液体与1,2-二氯乙烷混合溶液/水相界面上的转移反应

应用扫描电化学显微镜研究了室温离子液体(Omim·Tf2N)与1,2-二氯乙烷(DCE)混合溶液/水界面上的电子转移反应. 在保持共同离子(Tf2N-)的浓度比恒定及异相电子转移反应由界面电势差所决定的条件下, 研究了离子液体和DCE混合溶液中二茂铁(Fc)与水相中亚铁氰化钾[K4Fe(CN)6]之间异相电子转移反应. 探讨了混合溶液中离子液体的体积分数(xRTIL)的变化对混合溶液/水界面上电子转移反应的影响. 结果表明, 随着xRTIL的减小(从1减小到0.1), Fc在混合溶液中的扩散系数单调递增(从2.730×10-7 cm2·s-1增加到9.131×10-6 cm2·s-1); 而异相电子转移反应速率常数(k)则先逐渐减小(从8.0 mol-1·cm·s-1减小到0.32 mol-1·cm·s-1), 之后又略有增大(从0.32 mol-1·cm·s-1增大到0.48 mol-1·cm·s-1). 对这种现象可能的原因进行了较详细探讨.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

Note on the ab initio PUHF treatment of open-shell systems

Ab initio projected-unrestricted Hartree-Fock calculations have been carried out on a number of excited and ionic states of the water molecule. Results have been compared with large-scale CI calculations, with IVO calculations, and with those of Mrozek and Golebiewski obtained by the 2 × 2 rotation method applied to orbitals. It is concluded that the PUHF method may provide the most useful alternative to large-scale CI for calculating properties of open-shell systems. But it will not be generally useful for calculating spectral transition energies.     

NiOxHy薄膜的电致变色特性和机理

运用循环伏安和阶跃电位方法研究了Ni（OH）2粉末靶直流溅射沉积的NiOxHy薄膜电致变色特性．结合实时的光透射-时间变化，发现着色后的薄膜在零外电势下有一自发的消色过程，该过程可能对应着Li 的自发注入。着色没有自发过程，获取了着消色状态Ni2p3／2和O1s的XPS谱，表明在着色态镍被氧化，消色态镍被还原，相应地氧的化学环境发生改变．     

Comparison of solution-blending and melt-intercalation for the preparation of poly(ethylene-co-acrylic acid)/organoclay nanocomposites

Ethylene-acrylic acid copolymers (EAAs) and commercial montmorillonite clays organically modified with dimethyldihydrogenatedtallowammonium ions (Cloisite^® 15A and 20A) were used for the synthesis of nanocomposites by melt-compounding, static melting of polymer/clay mixtures and solution-intercalation in order to compare the effectiveness of these procedures and to shed light on the thermodynamics and the kinetics of the intercalation process. The preparation from solution was made by the use of several solvents, such as toluene, xylene, chloroform, etc., which were then removed from the hybrids by precipitation in different non-solvents or by evaporation. Particular attention was paid to the effect of the thermal treatments which are often used when processing the composites prepared from solution. X-ray diffraction (XRD) of the solution-blended composites showed that no intercalation of the EAAs inside the clay galleries can be achieved if solvent removal is made by precipitation in non-solvents or by room-temperature evaporation. On the contrary, intercalation was found to occur very rapidly (in less than 1 min) when both the hybrids prepared from solution and the mechanical blends of powdered components were melted in the absence of shear. Polymer intercalation was also found to occur, though with a lower rate, upon annealing the powder mixtures at temperatures lower than the EAA melting point. Microscopic observations made by polarized optical microscopy, scanning electron microscopy and transmission electron microscopy showed that the clay particles dispersion is appreciably lower for the composites prepared from solution, compared to those produced in the melt under shear flow conditions. The hybrids obtained by static melting of powder mixtures, on the other side, were expectedly found to comprise micron sized clay agglomerates, although intercalation was demonstrated also for these materials by XRD. The structure of the intercalated silicate layers stacks, characterized by an interlayer spacing of 4.0 nm, was shown to be independent of the preparation procedure and to correspond to thermodynamic equilibrium.     

溶剂在丁腈基聚氨酯中的溶解和扩散

用石英弹簧法和示差扫描量热法 (DSC)、红外分光光度计 (FTIR)研究了苯、乙醇、丙酮、醋酸乙酯和1,2 二氯乙烷五种溶剂在端羟基聚丁二烯 丙烯腈共聚物为软段的聚氨酯中的溶解和扩散行为 .结果表明所有溶剂在丁腈聚氨酯中的扩散均为非费克扩散 ,且随着溶剂蒸汽压增大偏离费克扩散的程度增大 .相同相对蒸汽压下 1,2 二氯乙烷和醋酸乙酯偏离费克 (Fickian)扩散的程度较大 ,而乙醇、丙酮和苯则较小 ,这主要与它们和丁腈软段溶解度参数的极性分量和氢键分量有关 .1,2 二氯乙烷和苯在HTBN PU中的溶解度较高 ,而乙醇 ,醋酸乙酯和丙酮较低 ,主要与它们和丁腈软段溶解度参数的色散分量有关 .所有溶剂均表现出近似Flory Huggins型等温吸收曲线 .红外表明吸收溶剂后 ,氨基甲酸酯基团的氢键化程度有不同程度的下降 ,和溶剂与之形成氢键的能力大小有关 .力学性能表明非极性溶剂苯对材料的力学性能影响较小 ,而乙醇 ,醋酸乙酯和丙酮由于可与氨酯基团形成氢键 ,对原HTBN PU中氨酯键氢键的破坏大 ,力学性能下降大