Rapid and sensitive method for determining free amino acids in honey by gas chromatography with flame ionization or mass spectrometric detection

This paper describes a rapid, sensitive and specific method for determination of free amino acids in honey involving a new reaction of derivatization and gas chromatography (GC) with flame ionization (FID) and mass spectrometric (MS) detection. The method allows the determination of 22 free amino acids in honey samples in a short time: 8 and 5 min for GC-FID and GC-MS, respectively. Quantitation was performed using Norvaline as internal standard, with detection limits ranging between 0.112 and 1.795 mg/L by GC-FID and between 0.001 and 0.291 mg/L by GC-MS in the selected-ion monitoring mode. The method was validated and applied to a set of 74 honey samples belonging to four different botanical origins: eucaliptus, rosemary, orange and heather. The statistical treatment of data shows a correct classification of different origins over 90%.     

Quantitative determination of several mono- and oligosaccarides in food products by means of high-pressure liquid chromatography replacement of the toxic eluent 'acetonitrile/water' by a mixture of harmless solvents

Summary The toxic eluent mixture acetonitrile/water frequently used for separation of mono- and oligosaccarides is replaced by the harmless temary mixture acetone/ethyl acetate/water. By various techniques — degassing of the eluent, parallel connection of two columns and temperature control of the columns, of the eluate and RI-detector — the method is made suitable for the determination of lower saccharide concentrations than usual. Methods for rational preparation of samples — extraction of the saccarides, deionizing of the sample solution — are suggested. Based on examples, the efficiency of the method is demonstrated.     

Optimization of an electrolytic conductivity detector for determination of toxic nitrogen-containing food contaminants separated by open tubular column gas chromatography

The combination of open tubular column gas chromatography with electrolytic conductivity detection has been evaluated for the determination of nitrogen-containing pesticide residues in food extracts. Optimization of the column position at the column-detector interface was crucial to the successful operation of the detector. The signal-to-noise ratio and response stability of the detector are greatly influenced by the composition of the electrolyte solvent. Large volume splitless injections using retention gaps and optimized detector operating conditions enabled pesticide residues in food extracts to be determined at sub parts-per-million levels. Although the electrolytic conductivity detector is less sensitive than the thermionic ionization detector, its greater nitrogen selectivity can he crucial to the determination of nitrogen-containing contaminants in food extracts, particularly in complex mixtures where phosphorus-containing contaminants or matrix compounds are also present.     

Monitoring multi-class pesticide residues in fresh fruits and vegetables by liquid chromatography with tandem mass spectrometry

A new analytical method was developed using liquid chromatography with tandem mass spectrometry for the routine analysis of 31 multi-class pesticide residues and applied to approximately 50 fresh fruit and vegetable samples (green bean, cucumber, pepper, tomato, eggplant, watermelon, melon and zucchini). Extraction of the pesticides with ethyl acetate was carried out. The optimal ionisation conditions were selected for each pesticide in the same run. The procedure was validated and the values of some merit figures, such as recovery, precision, linear range, detection limit and quantification limit for each pesticide were calculated together with its calculated expanded uncertainty (U). The average recoveries in cucumber obtained for each pesticide ranged between 74 and 105% at two different fortification levels (n = 10 each) that ranged between 9 and 250 ng g(-1) (depending on the pesticide). The uncertainty associated to the analytical method was lower than 23% for all compounds tested. The calculated limits of detection and quantitation were typically <1 ng g(-1) that were much lower than the maximum residue levels established by European legislation.     

Quantitative determination of sotolon, maltol and free furaneol in wine by solid-phase extraction and gas chromatography-ion-trap mass spectrometry

A method for the analytical determination of sotolon [4,5-dimethyl-3-hydroxy-2(5H)-furanone], maltol [3-hydroxy-2-methyl-4H-pyran-4-one] and free furaneol [2,5-dimethyl-4-hydroxy-3(2H)-furanone] in wine has been developed. The analytes are extracted from 50 ml of wine in a solid-phase extraction cartridge filled with 800 mg of LiChrolut EN resins. Interferences are removed with 15 ml of a pentane-dichloromethane (20:1) solution, and analytes are recovered with 6 ml of dichloromethane. The extract is concentrated up to 0.1 ml and analyzed by GC-ion trap MS. Maltol and sotolon were determined by selected ion storage of ions in the m/z ranges 120-153 and 79-95, using the ions m/z 126 and 83 for quantitation, respectively. Furaneol was determined by non-resonant fragmentation of the m/z 128 mother ion and subsequent analysis of the m/z 81 ion. The detection limits of the method are in all cases between 0.5 and 1 microg l(-1), well below the olfactory thresholds of the compounds. The precision of the method is in the 4-5% range for levels in wine around 20 microg l(-1). Linearity holds at least up to 400 microg l(-1), and is satisfactory in all cases. The recoveries of maltol and sotolon are constant (70 and 64%, respectively) and do not depend on the type of wine. On the contrary, in the case of furaneol, red wines show constant and high recoveries (97%), while the recoveries on white wines range between 30 and 80%. Different experiments showed that this behavior is probably due to the existence of complexes formed between furaneol and sulphur dioxide or catechols. Sensory experiments confirmed that the complexed forms found in white wines are not perceived by orthonasal olfaction, and that the furaneol determined by the method can be considered as the free and odor-active fraction.     

The Australian perspective

This presentation deals with issues of comparability and traceability in food analysis in Australia from several perspectives. This includes the current national (Australian) and increasingly international (Codex) performance-based approach to food analysis. The Australian food regulatory process will be described, particularly those aspects that impact on the analysis of food in a regulatory sense. This section will also describe two areas where specific methods have been mandated in legislation and discuss two case studies where the analytical method has impacted on the elaboration of standards. Other areas to be covered include regulation/requirements relating to supply/availability of reference materials, the use of proficiency testing as a means of ensuring comparability, and, finally, some thoughts on what role BIPM/CCQM may play in the analysis of food.Electronic Supplementary Material  Supplementary material is available for this article at

Separation of Dyes from Aqueous Solutions by Paper Adsorption

Separation of the dyes methyl violet, methylene blue, and congo red from aqueous solutions by paper capillary permeation adsorption method was studied using paper. Nearly 100% of the investigated dyes could be separated under the optimum conditions. The effect of pH on the separation efficiency was studied in particular. At pH 5–9, 1.3–11, and 7–11, the maximum separation was achieved for methyl violet, methylene blue and congo red, respectively. The effects of dye concentration and some foreign ions on the separatability were examined. Moreover, the selective separation of some dyes was attempted by elution with chemical reagents.     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.     

Agro-industrial waste enzymes: Perspectives in circular economy

According to the Food and Agriculture Organization of the United Nations, approximately 1.3 billion tons of food is wasted each year, equivalent to approximately one-third of world production. Agri-food wastes are the source of proteins, carbohydrates, lipids, and other essential minerals that have been exploited for value-added products by the development of biorefineries and sustainable business as important elements of circular economies. The innovation and materialization of these types of processes, including the use of disruptive technologies on microbial bioconversion and enzyme technology, such as nanotechnology, metabolic engineering, and multi-omics platforms, increase the perspectives on the waste valorization process. Lignocellulolytic enzymes, pectinases, and proteases are mainly used as catalyzers on agri-food waste treatment, and their production in house might be the trend in near future for agro-industrial countries. Another way to transform the agri-food wastes is via aerobic or anaerobic microbial process from fungal or bacterial cultures; these processes are the key to produce waste enzymes.     

Alysis of the volatile constituents of food by headspace GC-MS with reversal of the carrier gas flow during sampling

A technique has been developed for performing headspace GC-MS analysis of volatile components of food, in which the carrier gas flow is reversed during sampling in order to overcome problems caused by the diffusion of substances not retained by the cold trap. Chromatographic profiles of volatile compounds from cheeses, obtained at room temperature, provide confirmation of the validity of the reversed flow technique, and the versatility of the system is evidenced by its successful application to both solid and liquid matrixes: the absence of any discrimination against the various components reveals its efficacy for compounds with a wide range of volatility. Addition of internal standards to the sample enables the use of the technique for quantitative analysis.