表面活性含氟单体-丙烯酰胺共聚物溶液性质研究

以异佛尔酮二异氰酸酯(IPDI)、十二氟庚醇(FOH)、烯丙基聚乙二醇(APEG)合成的表面活性含氟单体(FSM)与丙烯酰胺通过水溶液聚合,制备出含氟疏水缔合聚丙烯酰胺(FPAM).用表面张力法研究了FSM的胶束化,用流变仪、动态激光光散射(DLS)和原子力显微镜(AFM)表征了FPAM溶液的流变性能、缔合结构尺寸和形态.结果表明,FSM在25℃下CMC为1.28 g.L-1,表面张力为26.77 mN.m-1.FPAM溶液属于假塑性体系,临界缔合浓度为0.660%,具有一定的耐盐性.DLS和AFM表明,在低于临界缔合浓度时FPAM溶液仍能产生大量的缔合结构,FPAM分子具有很强的疏水缔合性.     

Fluorocarbon stationary phases for liquid chromatography applications

This article presents an overview on fluorocarbon stationary phases for liquid chromatography (LC) applications. Fluorocarbons developed as alternative reverse phases have revealed previously unknown separation mechanisms and special utilities. Solvophobicity and fluorophilicity of the fluorinated phases provide enhanced selectivity for organofluorine compounds. The dual normal- and reverse-phase characteristics make fluorinated phases suitable for analysis of polar pharmaceutical and biological samples such as proteins, peptides, nucleotides, steroids, and alkaloids. Fluorinated phases for other applications including supercritical fluid chromatography (SFC), micellar electrokinetic liquid chromatography (MEKC), ion chromatography (IC), open tubular electrochromatography (OTEC), and liquid chromatography-mass spectrometry (LC-MS) are also highlighted.     

A facile synthesis of 2-substituted-2,3-dihydro-4(1H)-quinazolinones in 2,2,2-trifluoroethanol

2-Substituted-2,3-dihydro-4(1H)-quinazolinones were obtained in high yields by condensation of anthranilamide with aryl, alkyl or heteroaryl aldehydes or ketones in the refluxing 2,2,2-trifluoroethanol without any catalyst.     

A novel deacylation during the amination of trifluoromethyl β-dicarbonyl compounds

Starting from trifluoromethyl β-dicarbonyl compounds, a rare loss of CF₃CO was observed in the amination reactions performed under heterogeneous conditions using NsONHCO₂Et as the aminating agent and CaO or NaH as the base, while corresponding nonfluorinated β-dicarbonyl compounds under analogous conditions give non deacylated aminated compounds. This reaction can facilitate a direct synthesis of N-substituted α-amino esters or α-amino ketones.     

Enantioselective Approach for Expanding the Three-Dimensional Space of Tetrahydroquinoline to Develop BET Bromodomain Inhibitors**

The pharmaceutical industry has a pervasive need for chiral specific molecules with optimal affinity for their biological targets. However, the mass production of such compounds is currently limited by conventional chemical routes, that are costly and have an environmental impact. Here, we propose an easy access to obtain new tetrahydroquinolines, a motif found in many bioactive compounds, that is rapid and cost effective. Starting from simple raw materials, the procedure uses a proline-catalyzed Mannich reaction followed by the addition of BF₃ ⋅ OEt₂, which generates a highly electrophilic aza-ortho-quinone methide intermediate capable of reacting with different nucleophiles to form the diversely functionalized tetrahydroquinoline. Moreover, this enantioselective one-pot process provides access for the first time to tetrahydroquinolines with a cis-2,3 and trans-3,4 configuration. As proof of concept, we demonstrate that a three-step reaction sequence, from simple and inexpensive starting compounds and catalysts, can generate a BD2-selective BET bromodomain inhibitor with anti-inflammatory effect.     

Water and fluorinated alcohol mediated/promoted tandem insertion/aerobic oxidation/bisindolylation under metal-free conditions: Easy access to bis(indolyl)methanes

A green tandem reaction, including insertion/aerobic oxidation/bisindolylation, starting from indoles and diazo compounds has been developed. The combination of water and fluorinated alcohol plays dual roles as solvent and promoter in this chemical transformation. Molecular oxygen in the air acts as an oxidant. 3,3′-Bis(indolyl)methanes with quaternary carbon were produced under metal-free conditions. No any catalyst and additive were required. N₂ and water were released as sole by-products. Absence of water and fluorinated alcohol resulted in Wolff rearrangement product.     

Synthesis and properties of novel fluorinated epoxy resins based on 1,1-bis(4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2,2,2-trifluoroethane

A novel fluorinated epoxy resin, 1,1-bis(4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2,2,2-trifluoroethane (BGTF), was synthesized through a four-step procedure, which was then cured with hexahydro-4-methylphthalic anhydride (HMPA) and 4,4′-diaminodiphenyl-methane (DDM). As comparison, a commercial available epoxy resin, bisphenol A diglycidyl ether (BADGE), cured with the same curing agents was also investigated. We found that the BGTF gave the exothermic starting temperature lower than BADGE no mater what kind of curing agents applied, implying the reactivity of the former is higher than the latter. The fully cured fluorinated BGTF epoxy resins have good thermal stability with glass transition temperature of 170-175 °C and thermal decomposition temperature at 5% weight loss of 370-382 °C in nitrogen. The fluorinated BGTF epoxy resins also showed the mechanical properties as good as the commercial BADGE epoxy resins. The cured BGTF epoxy resins exhibited improved dielectric properties as compared with the BADGE epoxy resins with the dielectric constants and the dissipation factors lower than 3.3 and dissipation 2.8 × 10⁻³, respectively, which is related to the low polarizability of the C-F bond and the large free volume of CF₃ groups in the polymer. The BGTF epoxy resins also gave low water absorption because of the existence of hydrophobic fluorine atom.     

Synthesis of Highly Functionalized Fluorinated Porphyrins

Highly functionalized fluorinated porphyrins were synthesized by a convergent strategy. Nucleophilic substitution using fluorinated branched unit and 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin afforded highly functionalized fluorinated porphyrin 8 containing 24 fluorinated chains in the peripheral region.     

Synthesis of β-amino-α-trifluoromethyl alcohols and their applications in organic synthesis

A comprehensive overview on methods applied for syntheses of β-amino-α-trifluoromethyl alcohols, including stereocontrolled variants, is presented. In addition, reported cases of the exploration of β-amino-α-trifluoromethyl alcohols for the preparation of trifluoromethylated peptidomimetics and other biologically active, fluorinated compounds are discussed. Attractive opportunities for their applications as organocatalysts are also presented.     

Crystal packing of 8,9,10,12-tetrafluoro-<Emphasis Type="Italic">o</Emphasis>-carborane: H...F versus H...H contacts

Detailed study of the crystal packing of 8,9,10,12-tetrafluoro-o-carborane by the topological analysis of the electron density distribution function was performed and the competing between the F...H and H...H interactions in the crystal was investigated.