Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

An Expedient Method for the Umpolung Coupling of Enols with Heteronucleophiles**

In this paper, we present an unprecedented and general umpolung protocol that allows the functionalization of silyl enol ethers and of 1,3-dicarbonyl compounds with a large range of heteroatom nucleophiles, including carboxylic acids, alcohols, primary and secondary amines, azide, thiols, and also anionic carbamates derived from CO₂. The scope of the reaction also extends to carbon-based nucleophiles. The reaction relies on the use of 1-bromo-3,3-dimethyl-1,3-dihydro-1λ³[d][1,2]iodaoxole, which provides a key α-brominated carbonyl intermediate. The reaction mechanism has been studied experimentally and by DFT, and we propose formation of an unusual enolonium intermediate with a halogen-bonded bromide.     

Utility of 2-Diphenylphosphoryloxy-1,3-Dienes in Multicomponent Hetero-Diels–Alder Reactions to Construct Functionalized Six-Membered Nitrogen Heterocycles

The utility of 2-diphenylphosphoryloxy-1,3-dienes for the construction of substituted six-membered nitrogen heterocycles is presented. These dienes undergo boron trifluoride-promoted aza-Diels–Alder reactions when reacted with imines or related species formed in situ using aldehydes and amine derivatives. The stability of the dienes allows this three-component reaction to be carried out with no special precautions to eliminate water or air. Thirty-one examples of this process are presented. The usefulness of the enol phosphate functional group is highlighted in further reactions after the cycloaddition step to generate functionalized piperidenes or pyridines.     

Fluorinated azole anticancer drugs: Synthesis,elaborated structure elucidation and docking studies

The present article deals with the synthesis of novel nano-sized fluorinated thiazoles and studying their anticancer potentiality. The targeted azoles could be accessed via trifluoro-methylated thiosemicarbazone (3) prepared by reaction of with thiosemicarbazide in acidic solution of ethanol. The latter a fluorinated building block (3) have been reacted with appropriate derivatives of a-halo compounds namely, N-aryl 2-oxopropane-hydrazonoyl chlorides 4a-f using dioxane containing TEA as base catalyst. Also, the reaction between N-(4-(1-(2-carbamothioylhydrazineylidene)ethyl)phenyl)-2,2,2-trifluoroacetamide (3) and chloroacetonitrile 8 under the same experimental conditions furnished the corresponding amino thiazole derivative 11. In the same manner the base catalyzed cyclocondensation reaction between N-(4-(1-(2-carbamothioylhydrazineylidene)ethyl)phenyl)-2,2,2-trifluoroacetamide (3) and phenacyl bromide derivatives 12a-d afforded the corresponding thiazoles 13a-d in good yield. The structure of all synthesized thiazole derivatives as well as their mechanistic pathways were studied based on spectral data analysis and physical characteristics. The nanosized products were confirmed by using XRD analysis. Moreover, twelve samples were submitted for evaluation of their cytotoxicity activities against MDA-MB-231 (breast cancer cell) using colorimetric MTT assay, in comparison with Cisplatin standard drug. Two nano-sized thiosemicarbazone derivative 3 and the thiazole derivative 7c showed potent activity with IC₅₀ = 7.7 and 2.97 µg/ml, respectively in compared with the IC₅₀ = 4.33 µg/ml of cisplatin. The nanosized thiazole derivative 7c was more potent than cisplatin. Also, two thiazole derivatives 13b and 7b showed good activity with IC₅₀ = 13.4 and 14.9 µg/ml. In addition, the molecular docking studies have been achieved using 4hy0, (X-chromosome-linked- inhibitor of apoptosis protein; (XIAP)).     

Cellulose filter paper immobilized α-glucosidase and its application to screening inhibitors from traditional Chinese medicine

In this study, α-glucosidase was successfully immobilized on cellulose filter paper and further applied to screening inhibitors from traditional Chinese medicines combined with capillary electrophoresis analysis. For α-glucosidase immobilization, a cellulose filter paper was used as the carrier and grafted with amino groups by coating chitosan, then α-glucosidase was covalently bonded on the amino-modified carrier via epoxy ring-opening reaction using polyethylene glycol diglycidyl ether as the crosslinker. Several parameters influencing the enzyme immobilization were optimized and the optimal values were enzyme concentration of 4 U/mL, polyethylene glycol diglycidyl ether concentration of 1.25%, chitosan concentration of 7.5 mg/mL, immobilization pH 7.0, crosslinking time of 4 h and immobilization time of 2 h. The immobilized α-glucosidase exhibited good batch-to-batch reproducibility (RSD = 2.1%, n = 5), excellent storage stability (73.5% of its initial activity after being stored at 4°C for 15 days), and reusability (75% of its initial activity after 10 repeated cycles). The Michaelis constant of immobilized α-glucosidase and half-maximal inhibitory concentration of acarbose were calculated to be 1.12 mM and 0.38 μM, respectively. Finally, the immobilized α-glucosidase was used for screening inhibitors from 14 kinds of Traditional Chinese Medicine extracts, and Sanguisorbae Radix showed the strongest inhibitory effect on α-glucosidase.     

Preparation and Properties of Poly（ether ether ketone）/Carbon Nanotube Modified Polypropylene Janus Composite Separator北大核心CSCD

Lithium-ion batteries （LIBs）have attracted wide attention because of their broad prospects in electric vehicles. However,the safety problems and low multiplier performance of the commercial polyolefin separator limit their further development,due to the poor dimensional thermal stability and low electrolyte absorption rate. Poly（ether ether ketone）（PEEK）and carbon nanotube（CNT）are compounded to coat on polypropylene （PP） to prepare Janus composite separator （PP@C） through the phase inversion method. PP@C composite separator does not deform at 180 ℃ for 0. 5 h（only slight deformation）,illustrating excellent thermal stability. The electrolyte absorption rate of PP@C2 is 193. 8%. The electrolyte uptake rate of the PP@C2 composite membrane was 193. 8%,which was 64. 5% higher than the PP membrane,showing a superduper electrolyte permeability. As a result,the specific discharge capacity of LIBs assembled with PP@C2 composite separator is 157. 6 mA·h/g at 0. 2 C and 129. 8 mA·h/g at 2 C,showing good rate performance with the capacity recovery rate of more than 99%. This might be attributed to the ultra-high thermal stability of PEEK,the good affinity of the electrolyte,the high conductivity of CNT,as well as the uniform dispersion of Li+ ,so that the separator can have excellent electrochemical performance while improving safety. © 2022, Science Press (China). All rights reserved.     

计算化学在正丁醚制备实验教学中的应用*

正丁醚的制备是重要的大学有机化学实验,为提高学生对该实验所涉及的反应机理和关键操作要点的深入了解,采用Gaussian计算软件对正丁醇在酸催化下和无催化剂下的反应体系进行了研究,重点考察了酸催化下反应的主、副反应方向的反应机理。结果表明无催化剂下,正丁醇在常压液相下几乎不能发生反应;在酸催化下,正丁醇发生取代反应生成醚的反应路径是优势反应通道;酸催化下正丁醇的取代和消除反应速率常数均随温度增加而迅速增大,但消除反应的反应速率随温度增加更快,温度超过420 K消除反应将变得很明显,综合考虑,制备正丁醚的反应温度应控制在130~140 ℃之间较为合适。利用计算化学以图、表和动图等形式直观、动态、量化地解释了正丁醇成醚和成烯反应的竞争,该结果有助于更好地控制该反应体系,可用作实验教材的补充内容。     

无催化剂下醇和酚的高效O-硅基化

硅醚类化合物广泛应用于有机合成、 分离分析和精细化工等领域. 六甲基二氮硅烷是近年来发展的一种新型硅基化试剂, 被用于硅醚的高效合成, 但由于六甲基硅烷较为惰性, 通常需要加入催化剂活化. 本文报道了一种无催化剂下醇、 酚的高效硅基化新方法. 研究结果表明, 该方法可以兼容一级苄醇、 杂芳基苄醇、 脂肪醇, 二级醇甚至三级醇, 多数反应可以实现定量转化, 无需柱层析即可实现产物的分离纯化. 该方法可以拓展到酚的高效硅醚化, 也可以很方便地放大到100 mmol, 收率达到99%, 表明该方法具有较好的实用价值.     

咔唑-N，S-杂冠醚类荧光探针的合成及其检测Ag+性质

以双(2?氯乙基)氨基甲酸叔丁酯、2,2?(乙烷?1,2?二丁基(氧基))二乙硫醇和N?乙基咔唑为起始原料,设计、合成了一种含有杂冠醚基团的新型荧光探针分子L,其结构经¹H NMR、¹³C NMR及高分辨质谱进行了表征。随后利用荧光光谱在水/乙醇溶剂(4∶1,V/V)中研究了探针L对Ag⁺的选择性识别。研究结果表明,探针L与Ag⁺以1∶1的比例配位。通过计算得到配位常数K_a为2.01×10⁵ L·mol^-1,检测限为4.13μmol·L^-1。通过实验证明,该探针分子可应用于河流等环境水样中Ag⁺的检测。     

Thermochemistry of interactions of Na+ with benzo-15-crown-5 ether in acetonitrile-water mixtures at 298.15 K

Enthalpies of dissolution of benzo-15-crown-5 ether (B15C5) in mixtures of acetonitrile with water and in solutions of NaI and NaBPh₄ (I=0.05 mol dm^–3) in these mixtures were measured at 298.15 K. From the obtained results and appropriate literature data, the thermodynamic functions of B15C5/Na⁺ complex formation in acetonitrile-water mixtures were determined. The enthalpies of transfer of the complex B15C5/Na⁺ from pure acetonitrile to the examined mixtures were calculated and are discussed.