Morphology of peroxide-prevulcanised natural rubber latex: effect of reaction time and deproteinisation

A non-uniform mesh structure, i.e. a dense network near the surface of peroxide-prevulcanised natural rubber latex particles, was observed under transmission electron microscopy. In the initial period of prevulcanisation, the swelling ratio of the latex sheet decreased with longer reaction time while an increase in crosslink density of rubber particles containing polystyrene, prepared using the phase transfer/bulk polymerisation process, was noticed. The modulus of the rubber sheet increased up to maximum crosslinking and thereafter decreased. After removal of proteins from the latex membrane layer, derived from protein-lipid originally existing at the rubber particle surface, could not be detected. The absence of proteins, which act as free radical scavengers, resulted in a rapid diffusion of alkoxy radicals into the rubber phase of deproteinised latex and, therefore, a uniform crosslink distribution inside each particle was obtained.     

Optically active polymers containing side-chain photochromic moieties: Synthesis and chiroptical properties of copolymers of trans-4-(phenylazo)-1-naphthyl acrylate and trans-4-(1-naphthylazo)-phenyl acrylate with (?)-menthyl acrylate

The synthesis of photochromic optically active copolymers from trans-4-(phenylazo)-1-naphthyl acrylate (PANA), or trans-4-(1-naphthylazo)-phenyl acrylate (NAPA), and (?)-menthyl acrylate (MtA) is described. The copolymers prepared, having different contents of trans-phenylazonaphthalene moieties, have been characterized by IR, ¹H-NMR, UV, and GPC techniques. The chiroptical properties have been investigated by circular dichroism (CD) and the induced optical activity on the side-chain trans-phenylazonaphthalene chromophores discussed in terms of different conformational situations of the macromolecules in both the copolymer series. © 1994 John Wiley & Sons, Inc.     

PHOTO-INDUCED DOPED POLYANILINE BY THE VINYLIDENE CHLORIDE AND METHYL ACRYLATE COPOLYMER AS PHOTO ACID GENERATOR

The emeraldine base form of polyaniline (PANI) can be doped by a photo-induceddoping method. In this method a copolymer of vinylidene chloride and methyl acrylate(VCMAC) was used as photo acid generator which can release proton when it is exposedto ultraviolet light (λ= 254 nm). The structure of PANI-VCMAC system before and afterirradiation was characterized by elemental analysis, IR, XPS, and SEM images. Resultsobtained indicate that the photo-induced doping characteristics, such as doping positionand type of charge carriers, are similar to that of PANI doped with HCl. The poor room-temperature conductivity (～10~(-5)S/cm) of PANI-VCMAC system after irradiation maybe due to low doping degree (～pH= 3) and the difference in morphology as compared withPANI-HCl film.     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

UV curable epoxy acrylate-clay nanocomposites

UV curable epoxy acrylates were reinforced with two different organically modified montmorillonites (MMTs) and an unmodified MMT. Conversion and rate of polymerization was monitored by real time infrared spectroscopy (RTIR) and photo-DSC. Microstructures were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and optical clarity. Optical clarity of the films containing clay was quite good as only a slight decrease was observed. Physical properties of the reinforced films were examined by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), hardness and tensile testing. Enhancements in glass transition temperature (T_g), thermal stability and mechanical properties were observed. The films reinforced with the unmodified MMT exhibit the most significant enhancements in properties.     

Fluorinated nitroxides as ESR probes of solvation

Some newly synthesized fluorinated nitroxides, such as t-butyl perfluoroalkyl nitroxides Bu^tN(O) R_f (R_f=CF₃, 5; C₂F₅, 6; n-C₃F₇, 7) and s-butyl perfluoroacyl nitroxides Bu^sN(O) COR_f (R_f=CF₃, 9; n-C₃F₇, 10) have been employed as ESR probes of solvation in different common organic solvents. In aprotic solvents, the measured a_N values for each of the nitroxyl probes show a linear correlation with the cybotactic polar solvent parameters E_T (Dimroth) and Z (Kosowar), i.e. a_N=bE_T+c, and a_N=b′Z+c′. The physical significance for the slope (b or b′), the slope×E_T or slope×Z, the extrapolated intercept on a_N axis, c or c′, are linked, respectively, to the sensitivity of a specific nitroxide toward solvation, the magnitude of the overall solvation effect on the a_N value, and the intrinsic a_N value of each nitroxide in the ideal gaseous state. The intercept on the a_N axis may also serve as a new measure of electronegativity for perfluoroalkyl groups, CF₃, C₂F₅, n-C₃F₇, and perfluoroacyl groups, CF₃CO, n-C₃F₇CO. In protic solvents, i.e. alcohols and carboxylic acids, however, a_N values of all the probes, kept almost no change with the increase in E_T and Z. Furthermore, the plots of a_N versus non-cybotactic solvent constants, such as dipolar moment (μ) and dielectric constant (ε), all show random variations.     

Preparation and characterization of a viscosity index improver for naphthenic and paraffinic base oils

Copolymers of -methyl styrene and 2-ethylhexyl acrylate were prepared in a benzene solution. The presence of the copolymers were confirmed by solubility, IR and NMR tests. The molecular weight and the polydispersity of the polymers were estimated by GPC. The copolymers obtained were blended with paraffinic and naphthenic base oils. The viscosity, the viscosity index (VI) the Q value as well as the stability to shear and oxidation were obtained for these blends. The results are compared with the results obtained with an oil blend containing a commonly used high temperature additive. Two of the copolymers obtained have shown to be good alternatives for specific applications.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Etude théorique par la méthode DFT des structures non-classiques des systèmes X2H2F2 (X=Si, Ge, Sn)

The structure and the relative stability of isomers of molecules X₂H₂F₂ (X=Si, Ge, Sn) have been studied using the density functional theory (DFT). We have determined the optimised structures of the substituted isomers. The XX bond have been studied and compared to that of the parent molecules: X₂H₄. It appears that, for the planar and trans ethylenic systems, the double bond character of the XX decreases when the hydrogen atoms are substituted by fluorine atoms. The most stable structure is shown to be the one where the two fluorine atoms are fixed on the same atom. The bridged structures are also studied.     

Novel fluorinated block copolymer architectures fuelled by atom transfer radical polymerization

Block copolymers based on poly(pentafluorostyrene), PFS, in various numbers and of different lengths, and polystyrene are prepared by atom transfer radical polymerization (ATRP). Di- and triblock copolymers with varying amounts of PFS were synthesized employing either 1-phenylethylbromide or 1,4-dibromoxylene as initiators for ATRP. Diverse bromo(ester) (macro)initiators were also devised and involved in the formulation of fluorinated pentablock as well as amphiphilic triblock copolymers with a central polyether segment. Amphiphilic star-shaped fluoropolymers, hydrophobic fluorinated nanoparticles, or segmented fluorinated star-shaped block copolymers are further designed by use of different multifunctional initiators. The composition of the novel materials with PFS is determined by combination of SEC and ¹H NMR. Glass transition temperatures and thermal stabilities of the hydrophobic star-shaped PFSs on a six arm dipentaerythritol core are investigated in a wide range of molecular masses and further discussed.     

Preparation of 1,1,1,3,3-pentafluoropropane (HFC-245fa) by using a SbF5-attached catalyst

In this report, a simple process for preparing HFC-245fa through the reaction of 1,1,1,3,3-pentachloropropane (PCP) and anhydrous HF via two-step vapor-phase catalytic fluorination is described. The antimony pentafluoride catalyst was supported on inert porous materials to improve the catalytic activity. The resulting process catalyst not only exhibited high catalytic activity and excellent thermo-stability, but also improved the performance of SbF₅, in terms of hygroscopicity and corrosion.