Immobilization of endo-1,4-β-xylanase on polysulfone acrylate membranes: Synthesis and characterization

We report on a new enzyme/support system to immobilize proteins such as enzymes through a covalent bond on polysulfone membranes. In the present case the enzyme endo-1,4-β-xylanase (E.C.3.2.1.8) is attached to polysulfone previously derivatized by introducing an acrylate group. Membranes are properly prepared from this polysulfone acrylate. Afterwards the enzyme is immobilized though the amino groups of side chains of the amino acids of the enzyme and the acrylate group of the derivatized polysulfone. Such immobilization of the enzyme is confirmed by microelemental analysis as well as by amino acid analysis by HPLC. Moreover, the enzymatic activity of the membranes was evaluated and compared with that corresponding to the free enzyme. Certain physical parameters (asymmetry, irregularity, pore size and surface roughness) of the corresponding enzymatic membranes were obtained from SEM and AFM image interpretation.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

A New Kind of Void Soap-free P（MMA-EA-MAA） Latex Particles

Soap-flee P(MMA-EA-MAA) particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and methacrylic acid (MAA), and large voids inside the particles were generated by alkali posttreatment in the presence of 2-butanone. Results indicated that the size of void and theparticle volume were related with the amount of 2-butanone. The generation mechanism of voids was proposed.     

Solubilization and applications of single-walled carbon nanotubes into aqueous and organic media by the use of nanometer size-controlled fluoroalkyl end-capped oligomeric aggregates

We have studied on the solubilization of single-walled carbon nanotubes (SW-CNTs) into aqueous and organic media by the use of a variety of nanometer size-controlled fluorinated self-assemblies, which were formed by the aggregations of end-capped fluoroalkyl segments in fluoroalkyl end-capped acrylic acid oligomers [R_F-(ACA)_n-R_F], N,N-dimethylacrylamide oligomers [R_F-(DMAA)_n-R_F], acryloylmorpholine oligomers [R_F-(ACMO)_n-R_F], and N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_n-R_F]. Fluorinated self assemblies formed in organic media (colorless solutions) could solubilize SW-CNTs into organic media to afford the transparent pale yellow solutions. The dynamic light scattering measurements showed that the size of fluorinated self-assemblies increased after the solubilization of SW-CNTs into organic media. It was suggested that the solubilization of SW-CNTs into organic media is due to the encapsulation of SW-CNTs into fluorinated assemblies. Fluorinated assemblies were also able to solubilize SW-CNTs into water to give the transparent gray solutions. Among a variety of fluorinated assemblies, fluorinated assemblies formed by R_F-(ACMO)_n-R_F [R_F = CF(CF₃)OC₆F₁₃] oligomer was more effective for the solubilization of SW-CNTs into both aqueous and organic media. Contact angle measurements of dodecane and the fluorescence spectra for poly(methyl methacrylate) cast film modified by fluorinated self-assemblies—SW-CNTs complexes showed that SW-CNTs are dispersed above the PMMA surface.     

Fluorinated monomer–styrene copolymer latex particles: I. kinetic studies in a soap-free aqueous medium

Soap-free emulsion copolymerization of 2, 2, 2-trifluoroethyl acrylate (3FEA) with styrene was carried out by using potassium persulfate as an initiator, and the effects of the weight fraction of 3FEA in the monomer feed on the kinetics and the particle size were investigated. Monomer conversions were followed by a gravimetric method, revealing that the overall polymerization rate increased exponentially with an increase in the weight fraction of 3FEA. According to dynamic light scattering measurement, the final particle size was found to decrease with an increase in the weight fraction of 3FEA. The number of particles for 3FEA homopolymerization was roughly twice as large as that at the fraction of 0.9, although both fractions had the almost same polymerization rates. These results indicate that soap-free emulsion homopolymerization of 3FEA would proceed not only inside the polymer particles but also in the aqueous phase throughout the polymerization.     

Thermal stability and bond dissociation energy of fluorinated polymers: A critical evaluation

Intrinsic bond dissociation energies (BDEs) of selected fluorinated polymers are critically evaluated. Two distinctive approaches were followed. In the first one, according to Wu and Rodgers [E.-C. Wu, A.S. Rodgers, J. Am. Chem. Soc. 98 (1976) 6112-6115], starting from the gas-phase enthalpy of polymerization we obtained the polymer backbone BDE through appropriate thermodynamic cycles. Revised experimental results indicate that the CC BDEs of all the polymers taken into account fall within a limited energy interval, comparable to the average experimental uncertainty. Central to the second methodology adopted, is a model compound approach. Thanks to the large number of reliable thermodynamic data available in the scientific literature and to simple end-capping rules, C₂ molecules were chosen as suitable models for infinite linear polymers and alternating copolymers between ethylene and fluorinated olefins. For partially fluorinated polymers, like polyvinylidene fluoride (PVDF), alternating ethylene-tertrafluoroethylene (ETFE) and alternating ethylene-chlorotrifluoroethylene (ECTFE), the weight loss due to HF and HCl evolution during heating experiments was successfully related to the threshold energy E_o(HX) for 1,2-elimination from chemically activated hydrofluoro and hydrofluorochlorocarbons according to the modified Rice-Rampsberger-Kassel (RRKM) unimolecular theory.     

Determination of Size Distribution of Nano-particles by Capillary Zone Electrophoresis

A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied. This method for the determination of size distribution was statistical.     

Graft copolymerization of methyl acrylate onto potato starch initiated by ceric ammonium nitrate

A study was made of the ceric ammonium nitrate (CAN) initiated graft copolymerization of methyl acrylate (MA) onto potato starch. The variables affecting the graft were investigated. The optimums have been obtained; they are the concentrations of MA, CAN, and nitric acid (HNO₃) (1.08, 5.0 × 10^?3, and 0.081 mol/L, respectively). The reaction temperature is ca. 50°C and the reaction time is 2 h. The molecular weight of grafted poly(methylacrylate) has been determined. On the basis of experimental results, the mechanism of grafting has been explored, a new kinetic equation of the graft copolymerization is established: R_p = Kk_d [STOH] [Ce⁴⁺] + Kk_pk_d/k_t[STOH][M], where K, k_d, k_p, and k_t are constants. The equation fits the results of experiments. © 1993 John Wiley & Sons, Inc.     

Morphology of peroxide-prevulcanised natural rubber latex: effect of reaction time and deproteinisation

A non-uniform mesh structure, i.e. a dense network near the surface of peroxide-prevulcanised natural rubber latex particles, was observed under transmission electron microscopy. In the initial period of prevulcanisation, the swelling ratio of the latex sheet decreased with longer reaction time while an increase in crosslink density of rubber particles containing polystyrene, prepared using the phase transfer/bulk polymerisation process, was noticed. The modulus of the rubber sheet increased up to maximum crosslinking and thereafter decreased. After removal of proteins from the latex membrane layer, derived from protein-lipid originally existing at the rubber particle surface, could not be detected. The absence of proteins, which act as free radical scavengers, resulted in a rapid diffusion of alkoxy radicals into the rubber phase of deproteinised latex and, therefore, a uniform crosslink distribution inside each particle was obtained.