Electrochemical Immunoassay for Tumor Marker CA19-9 Detection Based on Self-Assembled Monolayer

A CA19-9 electrochemical immunosensor was constructed using a hybrid self-assembled membrane modified with a gold electrode and applied to detect real samples. Hybrid self-assembled membranes were selected for electrode modification and used to detect antigens. First, the pretreated working electrodes were placed in a 3-mercaptopropionic acid (MPA)/β-mercaptoethanol (ME) mixture for 24 h for self-assembly. The electrodes were then placed in an EDC/NHS mixture for 1 h. Layer modification was performed by stepwise dropwise addition of CA19-9 antibody, BSA, and antigen. Differential pulse voltammetry was used to characterize this immunosensor preparation process. The assembled electrochemical immunosensor enables linear detection in the concentration range of 0.05–500 U/mL of CA19-9, and the detection limit was calculated as 0.01 U/mL. The results of the specificity measurement test showed that the signal change of the interfering substance was much lower than the response value of the detected antigen, indicating that the sensor has good specificity and strong anti-interference ability. The repeatability test results showed that the relative standard deviations were less than 5%, showing good accuracy and precision. The CA19-9 electrochemical immunosensor was used for the actual sample detection, and the experimental results of the standard serum addition method showed that the RSD values of the test concentrations were all less than 10%. The recoveries were 102.4–115.0%, indicating that the assay has high precision, good accuracy, and high potential application value.     

Development of Neuropeptide Y and Cell-Penetrating Peptide MAP Adsorbed onto Lipid Nanoparticle Surface

Functionalization of nanoparticles surfaces have been widely used to improve diagnostic and therapeutic biological outcome. Several methods can be applied to modify nanoparticle surface; however, in this article we focus toward a simple and less time-consuming method. We applied an adsorption method on already formulated nanostructured lipid carriers (NLC) to functionalize these nanoparticles with three distinct peptides sequences. We selected a cell-penetrating peptide (CPP), a lysine modified model amphipathic peptide (Lys(N₃)-MAP), CPP/drug complex, and the neuropeptide Y. The aim of this work is to evaluate the effect of several parameters such as peptide concentration, different types of NLC, different types of peptides, and incubation medium on the physicochemical proprieties of NLC and determine if adsorption occurs. The preliminary results from zeta potential analysis indicate some evidence that this method was successful in adsorbing three types of peptides onto NLC. Several non-covalent interactions appear to be involved in peptide adsorption with the possibility of three adsorption peptide hypothesis that may occur with NLC in solution. Moreover, and for the first time, in silico docking analysis demonstrated strong interaction between CPP MAP and NPY Y1 receptor with high score values when compared to standard antagonist and NPY.     

New Cysteine-Containing PEG-Glycerolipid Increases the Bloodstream Circulation Time of Upconverting Nanoparticles

Upconverting nanoparticles have unique spectral and photophysical properties that make them suitable for development of theranostics for imaging and treating large and deep-seated tumors. Nanoparticles based on NaYF₄ crystals doped with lanthanides Yb³⁺ and Er³⁺ were obtained by the high-temperature decomposition of trifluoroacetates in oleic acid and 1-octadecene. Such particles have pronounced hydrophobic properties. Therefore, to obtain stable dispersions in aqueous media for the study of their properties in vivo and in vitro, the polyethylene glycol (PEG)-glycerolipids of various structures were obtained. To increase the circulation time of PEG-lipid coated nanoparticles in the bloodstream, long-chain substituents are needed to be attached to the glycerol backbone using ether bonds. To prevent nanoparticle aggregation, an L-cysteine-derived negatively charged carboxy group should be included in the lipid molecule.     

自悬浮定向流法制备纳米铜微粒及其结构表征

采用自悬浮定向流法制备金属铜纳米微粒,并用TEM,XRD和AES等分析手段研究了铜纳米微粒的形貌、粒度、结构及其表面氧化层特性。结果表明,在一定的参数条件下采用自悬浮定向流法可制备出单晶纳米铜微粒,并且通过工艺参数的调控可达到对微粒粒度的控制。     

Aktivierungsanalytische Bestimmung von Spurenelementen in Tomaten

Die Autoren machen mit aktivierungsanalytischen Untersuchungen am Reaktor der Technischen Universität Budapest bekannt. Der thermische Neutronenfluβ war 2·10¹¹ ncm^?28^?1, und es wurde ein Ge(Li)-Detektor mit 25 cm³ Volumen und einer Energieauflösung von 2 keV angewendet. Die untersuchten Tomatenproben enthielten durchschnittlich 85% Trockensubstanz. Es wurden folgende Konzentrationen an Spurenelementen ermittelt (in mg/kg): Br: 50,1; Mn: 10,2; Zn: 9,3; Cu: 6,6; As: 0,051; Sb:0,030; Au: 0,005.     

Responsive core–shell microgels: Synthesis,characterization, and possible applications

Core–shell microgels are of increasing interest as smart carriers of catalysts, as sensors, or as building blocks for colloidal superstructures. In the context of colloidal assemblies, photonic applications are probably the most promising ones. This progress report presents and discusses the most recent results in this area focusing on the last 2–3 years, and also gives some background information. In addition, potential perspectives of this area will be outlined. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1073–1083     

Nanoassemblies with light‐responsive size and density from linear flexible polyelectrolytes

This study presents electrostatically self‐assembled nanoparticles from linear flexible polyelectrolytes (poly(diallyldimethylammonium chloride or quarternized poly(4‐vinylpyridine)) and an ionic photo‐isomerizable azo dye (Acid Yellow 38) that can change their size upon UV‐light irradiation. Assemblies with narrow size distribution are stable in aqueous solution. For samples with under‐stoichiometric dye load, UV‐light exposure triggers a size decrease, e.g. from a hydrodynamic radius of R_h = 94 nm to R_h = 62 nm for an Ay38‐PDADMAC sample with a charge ratio of l_charge = 0.7. Size changes are caused by trans‐cis isomerization of the dye, accompanied by a change in hydrophilicity, binding enthalpy and entropy. Assemblies are characterized by static and dynamic light scattering, atomic force microscopy, UV–vis spectroscopy and isothermal titration calorimetry. Zeta potential measurements give insight into the electrostatic stabilization and size‐control of the ionic nano‐assemblies, revealing a master curve of effective surface charge density versus hydrodynamic radius. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys., 2013     

Vibrational spectroscopic study of poly(dimethylsiloxane)-ZnO nanocomposites

A series of poly(dimethylsiloxane)-zinc oxide (PDMS-ZnO) nanocomposites having different concentrations of ZnO nanoparticles (0, 1, 5, 10 and 20 wt%) have been prepared. Raman and FTIR-ATR spectroscopic analysis was performed in order to determine the interaction between the ZnO nanoparticles and PDMS polymer matrix. Density functional theory (DFT) using the (B3-LYP)/6-311++G(2df,2p) method was used to investigate the vibrational spectra of PDMS. A complete vibrational assignment is supported by the normal coordinate analysis, calculated Raman activities as well as IR intensities.The presence of ZnO nanoparticles in PDMS gives rise to significant differences in relative intensities of the characteristic vibrational bands with respect to the cross-linked polymer. The changes in relative intensities of Raman bands, as well as swelling measurements, were used to explain the effect of ZnO nanoparticles on the cross-linked structure of PDMS nanocomposites. It is established that ZnO nanoparticles influence the cross-linking density of the polymer matrix.