CuO/TiO2的制备及对NO＋CO反应性能的研究

以三种不同的TiO2为载体，负载6%CuO，在色谱-微反装置上考察了三种Cu6-Ti催化剂对NO＋CO反应的活性。结果表明，由于制备方法不同，活性差别很大，三者活性顺序依次为：Cu6-Ti(T)> Cu6-Ti(S)> Cu6-Ti(nm)，TiO2的比表面积及晶型对活性的影响不明显。H2-TPR结果表明，Cu6-Ti在整个TPR过程中出现了3或4个还原峰，表明有多种CuO物种存在。不同预处理Cu6-Ti的TPR显示，在反应中Cu物种可能以多种价态同时存在。NO-TPD结果亦证明，Cu6-Ti对NO＋CO的反应活性与NO在催化剂表面的解离难易密切相关，而与NO的吸附量关系不大。     

光化学-荧光分析法研究——Ⅲ.片剂及注射液中安定的测定

本文提出了测定安定的光化学—荧光分析新方法。安定在含有十二烷基硫酸钠的稀硫酸介质中,经紫外光照射后,产物能发射荧光(=368nm,=476nm)。安定浓度在0～2.5μg/ml范围内,荧光强度与浓度成良好的线性关系。方法的相对标准偏差为1.5％,检出限为0.044μg/ml,可用于片剂及注射液中安定含量的测定。     

Interaction of the excited singlet state of 1,4- and 1,8-dimethoxynaphthalene with some organic compounds: A fluorescence-quenching study

Summary The fluoroescence quenching of 1,4-dimethoxynaphthalene (1) and 1,8-dimethoxynaphthalene (2) by tetraphenylporpyrin (3), 9,10-diphenylanthracene (4), and 3-cyano-4-phenyl-6-(p-tolyl)-pyridin-2-one (5) has been studied in chloroform solution. The quenching occursvia a resonance energy transfer mechanism. The rate constant for the energy transfer (k _ET) of donor2 is slower than that of1 by the same acceptors, indicating that the steric effect dominates the ionization potential effect in all systems. The calculated critical transfer distances (R ₀) are 17–72 Å. In contrast, charge transfer is the predominant pathway of electronic deexcitation in the fluorescence quenching of donors1 and2 by 7,7,8,8-tetracyanoquinone-dimethane (6) in chloroform. The roles of temperature and geometrical structure of the donors on the efficiency of fluorescence quenching of1 and2 by acceptor6 have also been studied.

---

Wechselwirkung des angeregten Singlett-Zustands von 1,4- und 1,8-Dimethoxynaphthalin mit einigen organischen Verbindungen: eine Untersuchung zur Fluoreszenzlöschung

Zusammenfassung Die Löschung der Fluoreszenz von 1,4-Dimethoxynaphthalin (1) und 1,8-Dimethoxynaphthalin (2) durch Tetraphenylporphyrin (3), 9,10-Diphenylanthracen (4) und 3-Cyano-4-phenyl-6-(p-tolyl)-pyridin-2-on (5) in Chloroform wurde untersucht. Die Löschung verläuft über einen Resonanzenergietransfermechanismus. Die Geschwindigkeitskonstante für den Energietransfer (k _ET) ist bei gleichem Akzeptor für den Donor2 niedriger als für1. Daraus läßt sich schließen, daß in allen untersuchten Systemen der sterische Effekt über den Effekt des Ionisierungspotentials dominiert. Die berechneten kritischen Transferdistanzen betragen 17–72 Å. Im Gegensatz zu diesen Beobachtungen verläuft der vorherrschende Relaxationsmechanismus bei der Fluoreszenzlöschung von1 und2 durch 7,7,8,8-Tetracyanochinon-dimethan (6) über einencharge-transfer-Prozeß. Die Einflüsse von Temperatur und Geometrie der Verbindungen auf die Effizienz der Fluoreszenzlöschung von1 und2 durch den Akzeptor6 wurden ebenfalls untersucht.

     

LaC_3~n(n=-1,0,+1)分子簇的理论研究(英文)

用密度泛函方法研究了ＬａＣ３ｎ（ｎ＝－１，０，＋１）分子簇的结构和稳定性，对这个四原子体系，提出了５种可能构型，其中３种具有Ｃ２ｖ对称性，２种为Ｃ∞ｖ对称性．在Ｃ２ｖ对称性结构中，其中１个为Ｌａ接在弯曲的Ｃ３链上，第２个是Ｌａ通过２个键与Ｃ３环相链，第３个是Ｌａ通过１个键与Ｃ３环相连；在Ｃ∞ｖ对称性中，第１个Ｌａ接在Ｃ３链的一端，而在第２个构型中，Ｌａ被插入在Ｃ３链中．结果表明，环状结构当Ｌａ接在弯曲的Ｃ３链上的是局域极小值并且最稳定     

New chemosensor for larger guests based on modified cyclodextrin bearing seven hydrophobic chains each with a hydrophilic end group

A new chemosensor for larger guests was prepared. The new chemosensor bears hydrophobic units at the primary hydroxy side and a dansyl unit at the secondary hydroxy side of β-cyclodextrin. Due to the hydrophobic units, the new chemosensor is sensitive to large or slender guests such as SDS and insensitive to 1-adamantanol, which is a good guest for the natural β-CD.     

水热法制备高纯超细CeO2-ZrO2复合氧化物

Superfine composite powders of CeO₂-ZrO₂ (CZ) and CeO₂-ZrO₂-La₂O₃ (CZL) were prepared by hydrothermal method. The effects of pH、temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m²·g^-1 were obtained. A BET specific surface area was still at 44 m²·g^-1 after calcination at 1 000 ℃ for 6 hours.     

双波长K系数—标准加入吸光光度法同时测定锰和锌

研究应用双波长K系数—标准加入吸光光度法同时测定锰和锌二组分混合物.试验确定了锰和锌测定中K_(Mn)与K_(Zn)的回归方程.对合成试样、人发试样测定,结果满意.     

规整链球型含C_(60)聚(丙烯酸β-羟乙酯)的合成及其在水中的自组装

Ｃ60 由于其独特的物理化学性质 ,在生命科学中引起了人们的广泛兴趣 .例如 :水溶性Ｃ60 的羧酸衍生物 ,羟基取代Ｃ60 ,Ｃ60 的氨基酸水溶性衍生的合成已有报道[1～ 3] ,并被用来研究Ｃ60 的生物化学及医学活性 .Ｔｏｋｕｙａｍａ[4 ] 等合成了酶功能化Ｃ60及与核酸连接的Ｃ60 ,研究并证明了它的细胞毒性及Ｇ 选择ＤＮＡ切割能力等生化活性 .Ｆｒｉｅｄｍａｎ[5]等合成了水溶性Ｃ60 的羧酸衍生物 ,研究了它对ＨＩＶ 1艾滋病毒的抑制作用 ,此外 ,关于不同Ｃ60含量的Ｃ60 蛋白质衍生物的合成及性质的研究也有报道[6] .Ｃ60 是一个直径为 0 71…     

Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

Non-stoichiometry of YBa2Cu3O7-d Observed by Repeated Temperature Scanning

Repeated temperature scanning method was applied to observe non-stoichiometry of YBa₂Cu₃O₇-d, and interesting results were obtained. Two simultaneously occurring processes were separately observed in mass change; one is a fast process and the other is slow, so that their responses to the temperature change are quite different from each other. The fast process follows the cyclic temperature change, but the slow process is observed to be a gradual mass change. Kinetic behaviors of these two processes are also made clear by plotting the mass vs. the temperature. Furthermore, a hysteresis loop was observed in the plot of the mass vs. the temperature in a high temperature range presumably due to the third process, and it depends on the heating and cooling rates. This revised version was published online in July 2006 with corrections to the Cover Date.