生物质洁净能源研究中的流化床动力学模型

分别对最小流化床、鼓泡流化床和腾涌流化床及相应的全混模型、鼓泡模型、气泡汇集模型等加以综述 ,分析其优缺点 ,并在此基础上提出动力学模拟研究的新思路 .根据流化床内在的本质———流化态的不同 ,将流化床分为最小流化床、鼓泡流化床和腾涌流化床三种 .总结了前人针对各种流化床提出的全混模型、鼓泡模型、气泡汇集模型等思想 ,建议今后可以在以下几个方面进行深入研究 :⑴使得模型更有普适性 .⑵由于气泡有效直径尚不能在理论上求得 ,可以在理想气泡直径变化公式的基础上 ,加入非线性化学的计算 .⑶确定不同情况下的参数 ,使得工作更有延续性 ,也使得模型更加具有生命力 .⑷从高压的角度去进行模型的计算 ,并得到相应的试验数据支持 .     

Adsorption-controlled transition of the electrical properties realized in Hematite（alpha-Fe2O3） nanorods ethanol sensing

Alpha-Fe2O3 nanorods are synthesized through a hydrothermal method with no surfactant introduced and ethanol sensors are fabricated from these nanorods.The device can respond to ethanol vapour in a concentration range from 1 to 1500 parts per million and shows both p-type and n-type responding characteristics during the investigation of the ethanol sensing.The sensor displays a p-type characteristic when the ethanol concentration is low and converted into an n-type characteristic as the concentration exceeds a certain value.Such a phenomenon is attributed to the chemisorbed oxygen,which leads to different modifications of the energy band at the surface,namely,depletion layer or inversion layer.     

O2在Mo(001)表面吸附的第一原理研究

采用第一原理方法计算了O2分子在 Mo(001) 表面的吸附,得到了吸附构型的各种参数,并且计算了O2分子在 Mo(001) 表面4个位置（顶位,桥位,穴位垂直,穴位平行）吸附后的能量,结果表明在顶位吸附能最高。通过对O2分子在 Mo(001) 表面吸附的原子轨道电荷分布与态密度图的分析可以看出在吸附过程中主要是O原子的2p轨道电子与钼的4s和4d轨道电子的相互作用。     

接枝聚合物对小分子的选择性吸附研究

文章应用密度泛函理论研究接枝于壁面的方阱链对二元小分子混合物的选择性吸附特性. 系统的Helmholtz剩余自由能泛函被表示为硬球排斥和方阱吸引两部分贡献之和,分别由硬球链流体状态方程和变阱宽方阱链流体状态方程的简单加权密度近似来进行计算. 用此理论方法,分别考察了接枝聚合物的结构性质,以及不同温度下接枝分子层对二元方阱流体的选择性吸附性能. 结果表明:分子刷厚度随接枝密度线性增长而随温度非线性增加,并且在高温下趋于饱和;在较低温度下,接枝聚合物刷能表现出很好的选择性吸附能力,当聚合物刷被加热到高于饱和温度时,该能力将大幅度地减弱. 关键词： 密度泛函理论 接枝聚合物 选择性吸附 方阱链     

TiO2分子在GaN(0001)表面吸附的理论研究

采用基于密度泛函理论的平面波超软赝势法,计算了TiO₂分子在GaN(0001)表面的吸附成键过程、吸附能量和吸附位置. 计算结果表明不同初始位置的TiO₂分子吸附后,Ti在fcc或hcp位置,两个O原子分别与表面两个Ga原子成键,Ga-O化学键表现出共价键特征,化学结合能达到7.932-7.943eV,O-O连线与GaN[1120]方向平行,与实验观测(100)[001] TiO₂//(0001)[1120]GaN一致. 通过动力学过程计算分析,TiO₂分子吸附过程经历了物理吸附、化学吸附与稳定态形成的过程,稳定吸附结构和优化结果一致. 关键词： GaN(0001)表面 2分子')" href="#">TiO₂分子 密度泛函理论 吸附     

GaAs光电阴极激活时Cs的吸附效率研究

从NEA GaAs光电阴极的激活光电流曲线发现,当系统真空度不很高时,在首次Cs激活阶段,表面掺杂浓度较低的阴极材料,其光电流产生需要的时间也较长.同时,随着系统真空度的提高,这种时间上的差异又变得不再明显.该现象表明,Cs原子在阴极表面的吸附效率同表面层掺杂浓度以及系统真空度之间有直接的联系.为定量分析这种关系,本文根据实验数据建立了Cs在阴极表面吸附效率的数学模型,利用该模型仿真的结果同实验现象非常符合.该研究对进一步开展变掺杂阴极结构设计和制备工艺研究具有重要的价值和意义. 关键词： GaAs光电阴极 吸附效率 真空度 表面掺杂浓度     

MgO-decorated carbon nanotubes for CO2 adsorption: first principles calculations

The global greenhouse effect makes it urgent to deal with the increasing greenhouse gases.In this paper the performance of MgO-decorated carbon nanotubes for CO 2 adsorption is investigated through first principles calculations.The results show that the MgO-decorated carbon nanotubes can adsorb CO 2 well and are relatively insensitive to O 2 and N 2 at the same time.The binding energy arrives at 1.18 eV for the single-MgO-decorated carbon nanotube adsorbing one CO 2 molecule,while the corresponding values for O 2 and N 2 are 0.55 eV and 0.06 eV,respectively.In addition,multi-molecule adsorption is also proved to be very satisfactory.These results indicate that MgO-decorated carbon nanotubes have great potential applications in industrial and environmental processes.     

Complex formation between a nanoparticle and a weak polyelectrolyte chain: Monte Carlo simulations

Understanding the complexation processes between nanoparticles and polyelectrolytes is an essential aspect in many branches of nanotechnology, nanoscience, chemistry, and biology to describe processes such as nanoparticle stabilization/destabilization and dispersion, water treatment, microencapsulation, complexation with biomolecules for example, and evolution of the interface of many natural and synthetic systems. In view of the complexity of such processes, applications are often based on empirical or semiempirical observations rather than on predictions based on theoretical or analytical models. In this study, the complex formation between an isolated weak polyelectrolyte and an oppositely charged nanoparticle is investigated using Monte Carlo simulations with screened Coulomb potentials in the grand canonical ensemble. The roles of the nanoparticle surface charge density , solution pH and ionic concentration C_i are systematically investigated. The phase diagrams of complex conformations are also presented. It is shown that the polyelectrolyte conformation at the surface of the nanoparticle is controlled by the attractive interactions with the nanoparticle but also by the repulsive interactions between the monomers. To bridge the gap with experiments titration curves are calculated. We clearly demonstrate that an oppositely charged nanoparticle can significantly modify the acid/base properties of a weak polyelectrolyte.     

Photoemission study of the modification of the electronic structure of transition-metal overlayers on TiO2 surfaces II. Cr on TiO2(0 0 1)

The electronic states of the Cr overlayers on TiO₂(0 0 1) surfaces have been investigated using angle-resolved and resonant photoemission spectroscopy with synchrotron radiation. At lower coverages, Cr deposition on TiO₂(0 0 1) creates two well separated in-gap emissions due to the formation of surface Ti³⁺ (3d¹) ions and Cr³⁺ (3d³) ions. At higher coverages, the in-gap emission is developed into the 2-peak-structure emission of Cr 3d character. The corresponding state is considered to be of metallic nature from the viewpoint of the high ability of oxygen adsorption, but has no Fermi edge, indicating a possibility of forming small Cr clusters on TiO₂(0 0 1) at this stage.     

Quantum-chemical study of the interface formed by carboxylic species on TiO<Subscript>2</Subscript> nanoparticles. 1. Nanoparticle surface

The current paper presents results of a quantum-chemical study of the surface structure of nanoparticles of both rutile and anatase crystallographic modifications. Different stages of the surface relaxation are discussed. Water adsorption is considered. The calculations were performed in the spd-basis by using semi-empirical quantum-chemical codes, both sequential and parallel. The results are mainly addressed to the study of the interface formed by titania nanoparticles and a set of carboxylated species, namely, benzoic, bi-isonicotinic acids as well as tris-(2,2′-dcbipyridine) Fe(II) complex placed on the surface of either rutile or anatase polymorphs.This revised version was published online in August 2005 with a corrected issue number.