催化褪色光度法测定痕量钴的研究

研究了在ＰＨ１０．５的Ｎａ２Ｂ４Ｏ７－ＮａＯＨ介质中，痕量钴（Ⅱ）对过氧化氢氧化桑色素初色反应的催化作用，建立了催化动力学光度法测定痕量钴的新方法。方法的线性范围为０－１．２μ／ｍＬ检出限为４．４＊１０＾－１８ｇ／Ｌ。用于水和维生素Ｂ１２中钴的测定，结果满意。     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

水中阴离子表面活性剂的吸附分光光度法测定

研究萘基二苯甲烷与阴离子表面活性剂的缔合反应及缔合物在聚合物颗粒表面的吸附及洗脱 ,提出了碱性艳蓝BO分光光度法测定河水中的阴离子表面活性剂 ;碱性艳蓝BO与十二烷基苯磺酸钠、十二烷基硫酸钠、十二烷基磺酸钠的缔合物的表观摩尔吸光系数分别为3.76×104、3.63×104、2.15×104L·mol -1·cm -1 ,方法的线性范围为0.0～2.0mg/L,相对标准偏差3.8% (n=8);应用该法测定河水中阴离子表面活性剂含量 ,结果令人满意     

两种计算吸光光度法同时测定钙镁

研究了在pH10．5的硼砂-氢氧化钾缓冲溶液和乙醇的增敏作用条件下，偶氮氯膦Ⅰ与钙、镁的吸收特性，建立了多波长光度法同时测定钙和镁的方法。采用两种矩阵算法对试验数据进行处理，并对结果进行比较和分析。钙和镁含量在0～25μg／25ml范围内用计算法Ⅱ能得到准确结果。     

溶剂浮选吸光光度法测定微量铂

本文应用溶剂浮选吸光光度原理,拟定了微量铂的分析方案。用CTMAB作捕收剂,捕收〔Pt(SnC1_3)5〕~(3-)离子,浮选至有机溶剂乙酸乙酯中,在398nm处用1cm的比色皿测定吸光度,可以测定ppb级的铂。富集比为40,表观摩尔吸光系数为2.6×10~5,铂的回收率接近100％。     

阻抑动力学光度法测定痕量间苯二酚

研究发现，在硫酸介质中，Ｆｅ能催化Ｈ２Ｏ２与甲基红之间的裉色反应，加入间苯二酚后，间苯二酚又能灵敏地阻抑该氧化褪色反应，同时研究了该阻抑褪色反应的动力学条件，从而建立了一种新的测定痕量间苯二酚的方法。     

胶束增溶光度法同时测定铂、铑、钯和金的研究

本文研究了贵金属Pt、Rh、Pd和Au在SnCl_2-BRB-AG-乳化剂OP离子缔合物体系中显色反应的条件,采用偏最小二乘回归法对上述体系重迭光谱进行解析及数据处理。结果表明,该体系灵敏度高,表观摩尔吸光系数可达1.74×10～6～2.47×10～6L·mol～-1·cm～-1;体系稳定性较好。应用本文方法对混合试样中Pt、Rh、Pd、Au进行同时测定,取得较满意的结果。     

Simultaneous determination of traces of heavy metals by solid-phase spectrophotometry

A coupling sensitive solid phase spectrophotometric (SPS) procedure for determination of traces of heavy metals (Me-SPS) and multicomponent analysis by multiple linear regressions (MA), a simple methodology for simultaneous determination of metals in mixtures was inaugurated. The Me-SPS procedure is based on sorption of heavy metals on PAN-resin and direct absorbance measurements of colour product Me-PAN sorbed on a solid carrier in a 1-mm cell. This methodology (Me-SPS-MA) was checked by simultaneous determination of metals in synthetic mixtures with different compositions and contents of metals important in pharmaceutical practice: Zn, Pb, Cd, Cu, Co, and Ni. Good agreement between experimental and theoretical amounts of heavy metals is obtained from the recovery test (78.3–110.0%). The proposed method enables determination of particular metal ion at the ng mL⁻¹ level and it was successfully applied to the determination impurities from heavy metal traces in pharmaceutical substances (Cu in ascorbic acid, Pb in glucose, and Zn in insulin). The proposed procedure could be possible contribution to the development of pharmacopoeial methodology for a heavy metals test.     

Spectrophotometric determination of zinc in copper-base alloys with TAN

TAN reacts with zinc(II) forming a red complex with composition 1:2 Zn(II)-TAN and absorption maximum at 582 nm. Zinc can be determined with this reagent in the presence of Triton X-100, in the pH range 6.20-8.00 with a molar absorptivity of 4.5×10⁴ l/mol/cm Beer's Law was obeyed up to least 1.55 g/ml. Copper interference was eliminated with a mixture of thiosulfate and ascorbic acid and nickel separated by precipitation with dimethylglyoxime. The proposed method was used for zinc determination in several copper-base alloys and the results of analysis in comparison with certified values indicated that the procedure was accurate and precise. A derivative procedure is also proposed, allowing zinc determination with high sensitivity (5-400 ng/ml).     

Combination of three analytical techniques for speciation of Al in environmental samples

An analytical scheme is proposed which combines three speciation techniques for determination of particular Al species in soil extracts and percolating waters. A cation-exchange fast protein liquid chromatography — inductively coupled plasma atomic emission spectrometry (FPLC-ICP-AES) procedure, a microcolumn chelating ion-exchange chromatography- atomic absorption spectrometry (MCC-ETAAS) technique and the 8-hydroxyquinoline spectrophotometric method (8HQ-spectrophotometry) were employed. The FPLC-ICP-AES procedure offers determination of Al³⁺ (retention time 4.5 min) and Al(OH)²⁺ species (retention time 4.0 min) which are separated from Al(OH)⁺ ₂ (retention time 1.5min). AlF²⁺ coelutes with Al(OH)²⁺ species, while Al(SO₄)⁺, AlF⁺ ₂ and negatively charged Al organic complexes coelute with Al(OH)⁺ ₂ species. The MCC-ETAAS technique enables determination of the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphate- and fluoro-Al complexes. Employing the 8HQ-spectrophotometry the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphato- and most of the labile organic Al species are determined. The sensitivities of these selected techniques were adequate for speciation of Al in the samples analyzed. On the basis of the specific selectivity of a particular technique various groups of Al species may be determined. Thus, the comparison of analytical data from complementary procedures provides more comprehensive information on Al species present in soil extracts and percolating waters.