粒径和流速对吸附速率的影响

本文主要考察了吸附剂的粒径大小及动态循环时流速大小对吸附速率的影响，根据膜扩散限制和孔隙扩散限制的理论模型对其影响作了定量描述。     

Flow systems exploiting in-line prior assays

An expert sequential injection system involving a prior assay is proposed for spectrophotometric determination of phosphate and eventually zinc in soil extracts. The result of phosphate determination is the basis for a concentration-oriented decision regarding to the need or not for zinc determination. Zinc was only determined if a threshold value (peak height corresponding to 5.0 mg l⁻¹ P) was surpassed. The methods involved formation of molybdenum blue and the Rhodamine 6G/ammonium thiocyanate/Zn²⁺ ternary complex. Variations in the threshold value were < 2% during 4 h operating periods, false responses were not verified, and the analytical time was reduced in about 30%. Precise results (R.S.D. <3% P and < 1% Zn) in agreement with spectrophotometry and flame atomic absorption spectrometry were obtained. The innovation permits faster information processing, as well as a reduction in the number of measurements, number of analytical steps, laboratorial time, and consumption of sample and reagents, thus waste generation.     

Novel flow injection-fluorometric method for the determination of trace silicate and its application to ultrapurified water analysis

A highly sensitive fluorescence quenching method for the determination of silicate based on the formation of an ion associate between molybdosilicate and Rhodamine B (RB) in nitric acid medium was developed. A flow injection system coupled with a fluorescence detector was used for the measurement of fluorescence intensity at 560 and 580 nm as excitation and emission wavelengths, respectively. The calibration graph for Si showed a linear range of 0.1–5 ng cm⁻³ with correlation coefficient of 0.9999, and the detection limit of 0.06 ng cm⁻³. The proposed method was successfully applied to the determination of silicate in ultrapurified water with satisfactory results.     

流动注入吸附溶出—催化极谱氢波分析痕量铂

本文叙述一种流动注入吸附溶出一催化极谱测定痕量铂的新技术,它集中了溶出法、催化波和流动注入的优点,达到非常高的灵敏度和分析速度。实验给出了最佳载液组成、流速、注入体积、吸附富集电位和吸附时间等因素。本方法成功地进行了多种铂络合物、矿样和生物样品分析。     

壁喷电池在流动注射阳极溶出伏安法中的应用

在流动注射阳极溶出伏安法中应用壁喷电池,探讨了非稳定态电积过程的溶出峰电流理论方程,预言了峰电流正比于R~(3/4)(R为工作电极半径),并对有关参数进行了实验验证。对5×10~(-7)mol/L Cd(Ⅱ)连续测定40次,表明相对标准偏差为0.94％。     

Identifying potential binding modes and explaining partitioning behavior using flexible alignments and multidimensional scaling

A method is described for the rapid and automatic analysis of flexible molecular alignments using multidimensional scaling and a normalized scoring scheme. A projection scheme was devised to separate orientational and conformational effects. It is shown that the approach can be utilized for the identification of common binding orientations or to the study of differences in partioning behavior. It is suggested that the method can be employed as a novel approach exploring molecular similarity as a dynamic property, so that it includes aspects of motion (by way of mutual orientations), conformations and molecular properties.     

A microcalorimetric study of the association of hexacyanoferrate(II) ions with calcium and magnesium ions in aqueous solution

Using flow microcalorimetry, the ion association reaction M²⁺(aq)+Fe(CN) ₆ ^4– (aq)=MFe(CN) ₆ ^2– (aq) (M=Ca, Mg) has been studied at 25°C over the ionic strength range 0.02 to 0.08 mol-dm^–3. Analyses of the data to obtain H^o, the enthalpy change at infinite dilution, are described. The value obtained for H^o is sensitive to the kind of functions used to correct for non-ideal behavior.     

透射电镜薄样品倾转过程中的附加旋转及其计算

模拟透射电镜双倾台进行样品位向调整过程,推导出反映样品倾转前后其合成倾转轴(即共有菊池线对的法线)方向变化规律的计算公式,称为附加旋转角计算公式。指出,实现样品位向调整的双倾操作,等效于样品绕其合成倾转轴的倾转及该倾转轴绕Z轴(平行入射束方向)的旋转之和。利用双倾台对薄膜样品进行的系列倾转实验表明,由附加旋转角公式计算的附加旋转角和实测值相一致。还根据双倾操作过程导出了合成倾转角的计算公式,它可用于判断样品位向调整的准确度。     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.