In Vitro Determination of Dobesilate in Medicine and Human Urine with Chemiluminescence Detection

A unique flow injection chemiluminescence (CL) method for the determination of calcium dobesilate in pharmaceutical preparations and human urine is presented in this paper. The analytical reagents involved in the CL reaction, luminol and ferricyanide, were both immobilized on an anion-exchange column in an FI system. The CL signal produced by the reaction of luminol with ferricyanide (the reagents had been eluted from the column through sodium phosphate injection) decreased in the presence of dobesilate. The decreased CL intensity was linear to the dobesilate concentration in the range 0.2100.0ngmL^–1. At a flow rate of 2.0mLmin^–1, one analytical cycle can be completed in 1.5min, including sampling and washing, resulting in a throughput of 40 cycles per hour. The proposed method was applied successfully to the determination of dobesilate in pharmaceutical preparations and human urine without any pre-treatment. It was found that, after oral administration, the dobesilate concentration reached its maximum after three hours, and the dobesilate metabolism ratio in 24 hours was 57.1% in the bodies of volunteers.Received September 14, 2002; accepted March 11, 2003 Published online July 16, 2003     

Differences in the electrorheological response of a particle suspension under direct current and alternating current electric fields

We have observed an unusual reduction of shear stress with increasing shear rate under direct current electric fields, for an electrorheological fluid composed of sulfonated poly(styrene-co-divinylbenzene) particles dispersed in silicone oil. At all shear rates, the shear stress under the electric field is larger than that in the absence of the field, indicating that there is still some field-induced agglomeration of the particles. In contrast, the behavior under alternating current electric fields is the Bingham-fluid-type response commonly observed with electrorheological fluids. It is suggested that the conventional dipole–dipole interaction approach based on simplified microstructural models would be unable to explain these phenomena. Received: 27 November 2000 Accepted: 22 May 2001     

Determination of polar organic compounds by potentiometry at an anodically pretreated nickel oxide electrode

The open-circuit potential drop of an oxidatively pretreated nickel electrode in 0.1 M NaOH was used to develop a technique for the determination of alcohols, amino acids, carbohydrates, etc., in aqueous solution. The electrode pretreatment consisted of the formation of nickel hydrated oxides on the electrode surface with an oxidation state > 2. Both electrochemical and chemical pre-oxidation of the electrode surface were examined. The analytical signal was the enhancement of the potential drop corresponding to analyte concentration. The analytical signal was linearly related to the logarithm of the analyte concentration. The limits of determination ranged from 1 mM for low-molecular-weight to 0.02 mM for alkyl polyether alcohols. The flow-injection technique allows convenient pretreatment and direct observation of the analytical signal. Interferences from chloride and calcium can be readily eliminated by excluding them during electrode pretreatment. Potentiometric measurements were correlated with amperometric anodic responses at the nickel oxide electrode, allowing an unusual direct comparison of the two methods.     

10°锥角台锥型液相色谱柱尺寸等比例放大和柱内谱带流型的可视化研究

摘要利用改进的可视化装置, 研究了10°锥角的台锥型液相色谱柱内的谱带流型与柱参数变化的关系. 将有机玻璃柱管加工成内圆台外方型的一体结构, 选择折射率一致的色谱固定相硅胶和流动相环己烷, 使整个色谱柱成为高度清晰的透明体, 能直接观察柱中彩色样品谱带的动态三维流型. 研究结果表明, 在实验条件范围内, 流动相流速对谱带流型无影响, 填料的形状和性质对塞子状流型有一定程度的影响. 比较了柱长为5cm和等比例放大后柱长为10cm锥型柱内的流型, 发现放大后的锥型柱内仍然保持塞子状流型, 总柱效等比例增加. 表明继续按比例放大成为工业规模色谱柱后仍能保持塞子状流型.     

流动注射电位滴定研究：氟化物沉淀滴定测锂

设计制作了一种简便的梯度混合室,并考察了其性能,试验结果证实了此混合室的合理性和有效性.用此混合室建立了流动注射电位滴定测锂的新方法,载流为1×10~(-5)～1×10~(-4)mol·L~(-1)的F~乙醇-水(9 1)溶液,流速4.2ml·min~(-1),混合室体积400μl,进样体积120μl,分析速度60样·h~(-1),检出范围取决于载流中滴定剂的浓度,方法用于卤水中锂的测定,结果令人满意.     

Comparative study of 8-hydroxyquinoline derivatives as chelating reagents for flow-injection preconcentration of cobalt in a knotted reactor

8-Hydroxyquinoline (HQ), 2-methyl-8-hydroxyquinoline (CH₃-HQ), 5,7-dichloro-2-methyl-8-hydroxyquinoline (Cl₂-CH₃-HQ), 5,7-dibromo-8-hydroxyquinoline (Br₂-HQ), 5-sulfo-7-iodo-8-hydroxyquinoline (ferron) and 5-sulfo-8-hydroxyquinoline (SO₃H-HQ) were compared as chelating reagents for on-line sorption preconcentration of cobalt in a knotted reactor (KR) precoated with the reagent. The results obtained with the different HQ derivatives reveal those properties of the chelating reagent responsible for the processes taking place in the KR. The influence of hydrophobicity, acidity, stability of the cobalt chelate and type of substituents in the HQ ring system on the separate steps of the flow injection (FI) preconcentration procedure are discussed. According to the performance characteristics of the different HQ derivatives, the most important parameters for on-line preconcentration in a KR are the hydrophobicity of the reagent and the stability of the chelate complex with the analyte.     

Chemically modified electrode for the detection of carbohydrates

A nickel-catalysed chemically modified electrode is described which seems to represent a convenient compromise between ease of preparation, reproducibility, precision and detection limits for the determination of carbohydrates in biological matrices.     

On column injection-dual channel analysis of essential oils

A system to analyze a complex mixture simultaneously on two different columns after one single on-column injection is described. The splitting device, the possibilities of component identification by searching in a data base for Kovats indices on two different polarity stationary phases, and a practical example of an essential oil analysis are presented.     

Open-access liquid chromatography/mass spectrometry in a drug discovery environment

The use of open-access mass spectrometry to monitor synthetic chemistry reactions, and also the integrity and purity of new chemical entities, has been a part of the medicinal chemist's tool-box for more than 5 years. Originally in our group at Wyeth Research there were two open-access methods available to the chemists, flow injection analysis (FIA) and liquid chromatography/mass spectrometry (LC/MS). The FIA method was approximately 3 min long, while the LC/MS method was approximately 20 min long (including an 8 min gradient). Within the first 2 years, the total number of open-access analyses increased by approximately 125%. It is interesting, however, that the number of LC/MS analyses increased by more than 285%. This is attributed to the fact that the chemists began using the LC/MS data to monitor reactions and also to check final product integrity and purity. In addition, the number of chemists performing parallel synthesis reactions has increased; thus, individual chemists can produce sample sets of up to 100 vials. This paper describes the implementation of new methodology, which accommodates the need for much faster run times and also the ability to acquire alternating positive and negative ion spectra within the same run. In addition, the instrument has been configured to e-mail the resulting processed data report to the submitting chemist. Several methods have been developed, including structure elucidation using in-source collision-induced dissociation (CID) and night-time analysis. The LC/MS methods for this system are described herein and are applicable to both industrial and academic synthetic chemistry optimization efforts.     

Development of the continuously variable volume reactor for flow injection analysis: Part 1. Design, capabilities and testing

A new apparatus for mixing sample and reagent in flow injection analysis (FIA) is described. The continuously variable volume reactor (CVVR) replaces the conventional mixing coil in a flow injection (FI) manifold to provide mixing and dilution. A linear actuator motor allows control of the chamber volume via LabVIEW software. The chamber volume can be incremented in steps of 1 μl over the range 68-1704 μl. In addition, the chamber has an integral variable-speed stirring unit that is also under computer control. Experiments were performed to evaluate the dispersion characteristics of this new device, evaluate the volume reproducibility, and understand the mixing characteristics. Use of the chamber is shown in the determination of iron(II) in pond water, and in NIST SRM 1643d with excellent results and a detection limit of 3.7 μg/l iron(II). Advantages of the CVVR and future research activities using the device are discussed.