Two new standard reference materials for the determination of drugs of abuse in human hair

Two new standard reference materials (SRM) for drugs of abuse in human hair have been developed. SRM 2379 consists of hair spiked with cocaine, benzoylecgonine, cocaethylene, phencyclidine, amphetamine, and methamphetamine. SRM 2380 consists of hair spiked with codeine, morphine, monoacetylmorphine, and tetrahydrocannabinol (THC). The SRMs were prepared by soaking the hair in a solution of the target analytes in water-dimethylsulfoxide. The concentration of each analyte was determined using two methods, one based upon gas chromatography/mass spectrometry (GC/MS) and one based upon liquid chromatography/mass spectrometry (LC/MS). Both methods used 0.1 M HCl for extraction of all the analytes from the hair, except for THC, which was extracted with 1 M NaOH. For isolation of the analytes from the extracts, the GC/MS-based methods used different clean-up procedures from those used for the LC/MS-based methods. The results from the two methods were in good agreement with mean differences for the analytes ranging from 4% to 16%. These materials will enable laboratories performing analyses of hair for drugs of abuse to test the accuracy of their methods.     

1,6-六亚甲基二异氰酸酯自聚产物的结构表征

用IR与NMR表征了用醋酸钾为催化剂时 1,6 六亚甲基二异氰酸酯 (HDI)自聚产物的结构 .结果表明 ,自聚主产物是三聚体异氰脲酸酯 ,主要含有三聚体异氰脲基、异氰酸根 ,同时含有由杂质带来的微量氨基甲酸酯、脲基甲酸酯基、取代脲基、缩二脲基 .一维核磁谱及二维化学位移相关谱分辨出 7种羰基 ,一种NCO基 ,确定了氮上 8种不同取代结构的分子链连接情况 .通过建立理论模型 ,定量地描述了自聚产物的结构 .     

Structure and microporous formation of cellulose/silk fibroin blend membranes: Part II. Effect of post-treatment by alkali

Blend membranes (RCF1) were prepared from mixture solution of cellulose and silk fibroin (SF) in cuoxam by coagulating with acetone–acetic acid (4:1 by volume). The blend membranes were subjected to post-treatment with 10% NaOH aqueous solution, and their structure and properties were characterized by FT-IR, X-ray diffraction, DSC, SEM and DMTA. In previous work, cellulose/SF blend membranes (RCF2) prepared by coagulating with 10% NaOH aqueous solution formed a microporous structure, in which the SF as a pore former was almost completely removed from the membrane. However, when the blend membranes RCF1 were immersed in 10% NaOH aqueous solution for post-treatment, a strong hydrogen bonding between cellulose and SF inhibited the removal of SF. Although alkali is a good solvent for SF, the blend membranes RCF1 such obtained from cellulose and SF were alkali resistant. The crystallinity and the mean pore size of the blend membranes slightly decreased with increasing post-treatment time. This work provided a cellulose/silk blend membrane, which can be used under alkaline medium.     

Determination of trace metals in industrial boron carbide by solid sampling optical emission spectrometry. Optimization of DC arc excitation (current, atmosphere and chemical modifier)

Graphite arc emission spectrometry has become possible as a result of the invention of novel types of optical spectrometers with Echelle-optics and semiconductor array detectors, and by the application of electronically controlled, high current arc generators. An optimization of the excitation parameters to boron carbide analysis is reported here, measuring background corrected line intensities that were integrated for the time of total evaporation of 5 mg boron carbide sample with or without added chemical modifiers. The following set of experimental conditions were compared with respect of analytical sensitivity and precision: (A) no modifier, Ar + O₂ (20%), 16 A; (B) sample + graphite powder (1 + 1), Ar + O₂ (20%), 16 A; (C) sample + CaF₂ (1 + 1), Ar, 25 A; (D) sample + CaF₂ + graphite powder (1 + 1 + 1), Ar, 25 A. The graphite powder modifier resulted in improved precision in general, and the CaF₂ was effective as a plasma ionization buffer and fluorinating agent. The best compromise was found under conditions B, when oxygen was present in the discharge atmosphere. This is likely due to the stepwise conversion of the boron carbide matrix to the more volatile boron oxide. Under conditions B, detection limits in the ranges of 0.3–9 μg g⁻¹ for Al, Ca, Cr, Cu, Fe, Mg, Mn and Si and that of 18–38 μg g⁻¹ for Ti, W, and Zr were attained. Average RSDs of 10.2 and 9.7% were found, respectively, without and with internal referencing to boron.     

Comparison of particle size and flow rate optimization for chromatography using one-monomer molecularly imprinted polymers versus traditional non-covalent molecularly imprinted polymers

The dependence of enantio-selective chromatographic performance on particle size, as measured by separation factor, was investigated for one-monomer molecularly imprinted polymers (OMNiMIPs) compared to traditionally formed EGDMA/MAA molecularly imprinted polymers (MIPs). Five particle size ranges were compared (<20 μm, 20-25 μm, 25-38 μm, 38-45 μm, and 45-63 μm), revealing that the particle sizes above 25 μm provided the highest separation factor, and thus the best enantiomer separation, for both imprinted polymers. Other chromatographic parameters such as the number of theoretical plates and resolution exhibited only minor changes for the OMNiMIPs as the particle size changed, except for particles 20 μm and below. However, the number of theoretical plates and resolution for EGDMA/MAA are higher for particles in the 20-25 μm range. Thus, chromatographic factors for the EGDMA/MAA polymers are better in this range, despite better enantioselectivity for particle sizes above 25 μm. In contrast, OMNiMIPs generally show the most favorable performance for particle sizes in the 38-45 μm range. It was also found that decreasing flow rate resulted in improved enantioselectivity for both MIPs for all particle sizes.     

Influence of surface structure on surface analytical statements

The influence of surface structure of technical materials on results and statements of surface analytical methods has been investigated. Especially surface roughness as a typical property of rolled products has been observed. For this purpose samples of steel (technical surface, roughness up to 5 m) and silicon wafers (polished surface) have been analyzed by SNMS and GDOS in order to get information about changes of the surface roughness as function of the sputtering time and their influence on the statements about the depth profiles obtained.     

2-Polyfluoroalkylchromones. 9. Synthesis and structures of 5-(2-hydroxyaryl)-7-polyfluoroalkyl-1,4,8-triazabicyclo[5.3.0]dec-4-enes

2-Polyfluoroalkylchromones reacted with diethylenetriamine at 20 °C to form the corresponding 1,4,8-triazabicyclo[5.3.0]dec-4-ene derivatives. The crystal structures of 5-(2-hydroxyphenyl)-7-trifluoromethyl-1,4,8-triazabicyclo[5.3.0]dec-4-ene and 1-(2-aminoethyl)-7-(2-hydroxy-5-methoxyphenyl)-5-(1,1,2,2-tetrafluoroethyl)-2,3-dihydro-1H-1,4-diazepine were established by X-ray diffraction analysis.     

Fast Multi‐residue Screening for 84 Pesticides in Tea by Gas Chromatography with Dual‐tower Auto‐sampler,Dual‐column and Dual Detectors

A fast multi‐residue screening method for determining pesticides in tea is described. Pesticides are extracted from tea with acetone and methylene chloride, then enriched and cleaned up with solid phase extraction (SPE) prior to gas chromatographic determination. The fast screening is achieved by a gas chromatograph system equipped with dual‐column, dual‐tower auto‐sampler and both electron capture detector (ECD) and flame photometric detector (FPD). Optimal conditions are investigated for the prospective pesticides including column selection, detection mode, the retention behaviors, quantitative calibration, as well as the recoveries and repeatability of pesticides from tea samples. Under the optimal conditions, with the FPD‐P detector accompanied CP‐SIL 13CB column, 48 pesticides can be separated well and detected within 38 min; and with a DB‐5 column, 35 ECD‐detectable pesticides can be separated and detected within 46 min. The recoveries of 84 pesticides in tea samples are 65–120% with 0.34–16% RSD for spiking 0.02–3.0 mg/kg standard species. Because of the thermal instability of most pesticides, direct cold extraction of pesticides from a tea sample is recommended. The proposed method provided a very fast and efficient procedure to screen 84 pesticides from a complicated tea sample matrix.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.     

A multicommuted fluorescence-based sensing system for simultaneous determination of Vitamins B2 and B6

A multicommuted flow-through optosensor based on the direct fluorescence measurements of Vitamins B₂ and B₆ using a non-polar sorbent (C₁₈ silica gel) as solid sensing zone (to accomplish the separation and subsequent preconcentration/detection of the target analytes) have been developed. The proposed flow system was controlled by Java-written home-made software and designed using three-way solenoid valves for independent automated manipulation of sample and carrier solutions. The native fluorescence signal was simultaneously monitored at two pairs of excitation/emission wavelengths (450/519 and 294/395 for B₂ and B₆, respectively). The separation of the analytes was performed in the detection flow cell, using the differences in the sorption/elution process on the solid support between the two vitamins, due to their different polarity. Using an optimised sampling time, the analytical signal showed linearity in the range 0.01-0.4 and 0.15-3 μg ml⁻¹ with detection limits of 0.003 and 0.045 μg ml⁻¹ for B₂ and B₆, respectively, obtaining R.S.D. (%) values better than 2% for both analytes. The proposed methodology was applied to different pharmaceutical preparations, obtaining remarkably good results with recoveries ranging from 96 to 107.5%.