Turbulence Closure with a Topography-parameter-free Single Equation Model

A new topography-parameter-free turbulence closure, based on a transport equation for the pseudo eddy viscosity, is described. The model is tested against experimental data of several flow cases across the Mach number range and compared to Menter's single equation model and to the Spalart-Allmaras model. The main conclusion is that the new closure outperforms the other two models in both low and high speed flows.     

Flow Compactifications of Nondiscrete Monoids, Idempotents and Hindman's Theorem

We describe the extension of the multiplication on a not-necessarily-discrete topological monoid to its flow compactification. We offer two applications. The first is a nondiscrete version of Hindman's Theorem, and the second is a characterization of the projective minimal and elementary flows in terms of idempotents of the flow compactification of the monoid.     

Lattice orientation within stirring-induced crystals of polyethylene

Micro-shish-kebab stirring-induced polyethylene crystals, as defined and described in the preceding paper, are flat, ribbon-shaped fibers. Selected area electron-diffraction techniques were used to determine the orientation of the crystal axes with respect to the external fiber shape. It has been shown that in addition to the crystal-lographic c-axis laying along the fiber direction, the normal to the ribbon plane is parallel to the crystallographic a-axis.     

Recent Developments in Flow Injection/Sequential Injection Liquid-Liquid Extraction for Atomic Spectrometric Determination of Metals and Metalloids

Abstract

This review aims to provide a critical overview of automated flow injection and sequential injection liquid-liquid extraction for preconcentration and/or separation of ultra-trace metal and metalloid species hyphenated with atomic spectrometric detection systems, including some new trends and applications in the subbranches of cloud point extraction (CPE), wetting film extraction (WFE), supported liquid membrane extraction (SLME), extraction chromatography (EChr), and liquid-phase microextraction (LPME) techniques. The analytical performance of flow-injection/sequential injection liquid-liquid extraction methods is markedly affected by the components of the flow network such as segmentor, extraction coil, and phase separator. Thus, an overall presentation of system components along with some novel strategies for interface with atomic spectrometers is discussed and exemplified with selected applications.     

氩气感应耦合等离子体速度与温度数值模拟

为了获得用于研究再入飞行器热防护系统的感应耦合等离子体风洞流场数据,基于流场、电磁场和化学场的多场耦合建立了非平衡态感应耦合等离子体数值模型。利用该模型对不同入口质量流率和不同工作压力下的感应耦合等离子体进行了数值模拟,得到了相应工作参数下感应耦合等离子体温度与速度的分布特性。计算结果表明:等离子体中心线上的速度随着入口质量流率的增大而增大,而随着工作压力的增大而减小;同时,等离子体中心线上的温度随着入口质量流率的增大而减小,而随着压力的增大先减小后增大。这些结果可为感应耦合等离子体风洞优化设计及其工业应用提供理论指导。     

主应力迹线的自动绘制

主应力迹线是代表主应力方向的曲线簇。在土木建筑工程中主应力迹线是布筋方向的依据,但是在工程中通常都是徒手或用曲线板近似绘制主应力迹线。作者提出一种新的主应力迹线自动的绘制方法。该方法是根据主应力迹线满足过任意三条等倾线的主应力都可以用二次曲线来描述这一条件,再利用主应力迹线本身所具有的性质列出方程组解算出描述主应力迹线的一元二次方程,然后根据方程描绘出所求的主应力迹线。实验证明这种方法对于工程上进行主应力迹线的绘制很有效。     

流动注射-ICP光谱分析中的基体效应和酸效应研究

本文讨论了流动注射-ICP光谱分析中的基体效应和酸效应。当基体(Na、Ca、Fe、Zn)的浓度大于5mg/ml时,待测元素的谱线强度表现出不同程度的降低;上述基体的引入对激发温度和电子密度的影响不明显;基体产生的抑制效应可能与改变了待测元素粒子的激发几率的因素有关;于载流体中加入一定量的基体元素,是消除或降低基体效应的有效方法。酸(HCl、HNO_3、H_2SO_4)对待测元素表现出不同程度的抑制效应,其主要原因是物理干扰所致。     

天然水中微量稀土元素镧的流动注射在线预浓集ICP光谱法测定

本文采用P507萃淋树脂为固定相,应用流动注射(FI)在线预浓集技术,建立了镧的ICP发射光谱分析方法,对天然水中的微量镧进行了测定,获得满意结果。     

光电倍增管在磷酸液声致发光实验中的应用

对不同厚度液体进行光强测量,深入探索空化气泡的运动,研究发光机理很有意义。用超声激励法在磷酸液体中实现多泡声致发光,研究不同共振频率下发光的特点。利用光电倍增管多次测量发光强度相互比较,结果是在液体厚度10 cm、驱动频率f=21.061kHz和f=20.316kHz时,周期性较好为50μs,液体通过漩涡集中气泡可以使更多气泡发光;在液体厚度3 mm、驱动频率f=17.91kHz和f=19kHz时,周期性很好为25μs;且光信号都较强。结论是磷酸中声致发光强度、周期与液体厚度、驱动频率密切相关。本文以磷酸液多泡声致发光实验研究为基础,从内部和外部原理来出发,详细介绍了光电倍增管在多泡声致发光光强测量中的实用,为今后研究者提供了一些经验。根据实验过程中遇到的一些实际问题提出了建议和改善意见。