非水体系中哌啶在银电极表面的表面增强喇曼散射

本文测定了哌啶在甲醇溶液中吸附在银电极表面的表面增强喇曼散射(SERS)光谱,及其随电位的变化,同时还测定了电极经不同氧化-还原循环(ORC)预处理时的SERS谱,对所得结果进行了分析比较,并进一步研究了非水体系和水体系SERS谱之间的关系.实验结果表明:哌啶在甲醇体系中比在水体系中SERS谱的增强因子要小,并且它们的SERS谱线随电位的变化也有一定的差别.     

基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。     

Adsorption of 2‐amino‐5‐cyanopyridine on a gold surface as probed by surface‐enhanced Raman spectroscopy

The adsorption of 2‐amino‐5‐cyanopyridine (2‐ACP) was investigated in solution at different pH values by i n situ surface‐enhanced Raman scattering (SERS) spectroscopy combined with the electrochemical method. The assignments of the main bands were first performed on the basis of the spectral features of similar compounds and with the help of density functional theory calculations. The results revealed that the adsorption and the interfacial structure of 2‐ACP on the Au electrode depended on the applied potential and the pH values of the solution. In the natural solution, 2‐ACP was adsorbed on the surface with a vertical orientation by the CN group from − 0.4 to − 1.0 V, whereas in the − 0.4 to 0.8 V range, the N atom of the pyridine ring was bound to the surface. A transition region for the reorientation of the two adsorption modes was observed from − 0.8 to − 0.4 V. A flat configuration was preferred at an extremely negative potential. A similar surface adsorption behavior was observed in the alkali environment, while the Stark effect slope decreased because of the adsorption of OH⁻. Due to the protonation of N atom in the acidic solution, the potential region for the coexistence of two configurations ranged from − 0.4 to 0.2 V. Additionally, a similar adsorption configuration was proposed on the Au colloids at various pH values. The results revealed that the adsorption behavior became more complex on colloidal surfaces than that on a rigid electrode surface. Copyright © 2010 John Wiley & Sons, Ltd.     

Modifications of interface chemistry of LSM-YSZ composite by ceria nanoparticles

A porous composite electrode LSM-YSZ (lanthanum strontium manganite and yttria stabilized zirconia) was impregnated with different amounts of SDC (samarium substituted ceria) nanoparticles. The materials were investigated with X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy to determine the microstructure, the interface chemistry and the surface chemistry of the various impregnated samples. The SDC nanoparticles cover the surface of the LSM-YSZ backbone to a large extent; they are approximately 5-20 nm in diameter and have a cubic crystal structure. Low concentrations of lanthanum and manganese originating from LSM were detected within SDC particles. It was also observed that the relative atomic concentration of strontium increased on the LSM-YSZ surface with increasing amount of SDC nanoparticles. These findings are related to the applied nanoparticle impregnation method. It is indicated that interactions between surfactant, nanoparticles, impregnation solution and the LSM-YSZ composite take place which can locally affect the surface and interface chemistry of the investigated materials.     

应用浮动基准法修正光谱光源漂移影响的模拟验证

近红外无创伤血糖检测目前面临的挑战主要是测量条件难以保证稳定、测量系统及被测对象自身的背景变化等问题,导致很难从背景变动的光谱中提取出糖浓度变化信息。经过多年的实验研究发现应用浮动基准参考测量法有望消除仪器漂移及被测对象自身背景变动的影响。但是浮动基准位置因人及测量部位不同而异,在不同的测量波长下其浮动基准点位置也不同,因此,欲在实验中验证浮动基准法的光谱修正效果需要测量出与入射光位置不同径向距离处的漫反射光强,然而在实际实验中位置精度很难保证。为此,研究了用模拟实验的方法验证多波长下浮动基准法对光源漂移所引起的光谱变化的修正效果,基于Monte Carlo模拟,分别采用浓度为5%和10%的Intralipid溶液作为被测样品,通过改变入射光子数模拟光源漂移的影响。得到模拟的光谱数据后,利用浮动基准法对其进行处理,并分别对浮动基准法修正前后的光谱数据进行偏最小二乘建模分析,将预测结果进行比较发现：两种浓度Intralipid溶液在存在光源漂移影响情况下修正后的模型预测精度预测均方根误差(RMSEP)相比于修正前分别减小了98.57%(5% Intralipid)和99.36%(10% Intralipid)。表明浮动基准法在消除光源漂移的影响方面效果明显。     

环形电极单间隙电晕放电伏安特性

基于用于直线变压器型驱动源的多间隙气体开关结构,提出一种环形放电间隙与电晕针并联的气体火花间隙。通过测量间隙耐压过程中电晕放电的伏安特性,研究了气体介质、气压、电晕极性、电晕针长度以及针尖对应电极结构等因素对伏安特性的影响。结果表明:以空气为绝缘气体,负极性电晕可获得较稳定的伏安特性;改变电晕针长度和针尖对应电极结构可方便地实现对电晕放电伏安特性的调节以满足开关要求。     

ITO界面调制层对GZO电极LED器件性能的影响

采用磁控溅射制备GZO和具有ITO界面调控层的GZO(ITO/GZO)透明导电薄膜作为大功率LED的电流扩散层,对比研究界面调控层对LED器件性能的影响。研究结果表明,ITO/GZO薄膜的透过率在可见光区达80%以上,退火后的ITO/GZO薄膜有较低的电阻率(1.15×10^-3 Ω·cm)。ITO调控层的介入能够调制GZO表面粗糙度,有利于改善LED外量子效率,降低GZO/p-GaN界面的接触势垒,提高LED器件的光电性 能。通过ITO界面调控后,LED器件20 mA驱动电流下的工作电压从9.5 V降低为6.8 V,发光强度从245 mcd 升到297 mcd,提高了20%;驱动电流为35 mA时,其发光强度从340.5 mcd 升到511 mcd,提高了50%。     

Platinum particles dispersed poly(diphenylamine) modified electrode for methanol oxidation

A modified potentiostatic method, termed the ‘pulse pontentiostatic method’ (PPSM) was used to get nano fibrillar poly(diphenylamine) (PDPA) film on Indium tin oxide (ITO) coated glass electrode and also for making modified electrode with platinum particles dispersed in PDPA. Platinum clusters were electrodispersed under constant potential on PDPA films to obtain catalytic electrodes for methanol oxidation. Energy dispersive analysis of X-rays (EDAX) results showed that the Pt microparticles are deposited into PDPA film. Scanning electron micrograph, SEM images show that the deposition results spherical catalytic particles. X-ray photoelectron spectroscopy (XPS) results inform that the net electronic charge on carbon atom and also the imine/amine ratio was not affected by Pt loadings. The modification of electrode surface by nano fibular PDPA improves the electrocatalytic activity for methanol oxidation.     

高电子迁移率晶体管放大器高功率微波损伤机理

在TCAD半导体仿真环境中,建立了0.25 m栅长的AlGaAs/InGaAs高电子迁移率晶体管(HEMT)低噪声放大器与微波脉冲作用的仿真模型,基于器件内部的电场强度、电流密度和温度分布的变化,研究了1 GHz的微波从栅极和漏极注入的损伤机理。研究结果表明,从栅极注入约40.1 dBm的微波时,HEMT内部峰值温度随着时间的变化振荡上升,最终使得器件失效,栅下靠源侧电流通道和强电场的同时存在使得该位置最容易损伤;从漏极注入微波时,注入功率的高低会使器件内部出现不同的响应过程,注入功率存在一个临界值,高于该值,器件有可能在第一个周期内损伤,损伤位置均在漏极附近。在1 GHz的微波作用下,漏极注入比栅极注入更难损伤。     

直流激励的大气压氩气喷枪的光谱研究

利用正高压驱动空心针-板喷枪装置,通入工作气体氩气,在大气压空气中产生了均匀稳定的喇叭状等离子体羽。电学和光学测量结果表明,放电虽然是在直流电源驱动下工作,但放电为周期性的脉冲。通过对等离子体羽发光信号进行空间分辨测量,研究了脉冲的形成机理,发现除针尖附近的电晕放电外,等离子体羽是以正流光(等离子体子弹)从针尖向着接地电极方向传播的。采用光谱学方法,对电子激发温度随电压的变化及其空间分布进行了测量。结果表明,电子激发温度(约为3 eV)随电压的增大而升高,在一定电压下,电子激发温度沿气流方向也在升高。