Phonon spectroscopy of photochemical reactions in organic solids: Photodimerization of 2,6-dimethyl-p-benzoquinone

The Raman phonon spectroscopic study shows that the photodimerization of 2,6-dimethyl-p-benzoquinone. In the solid state is initially a homogeneous reaction but later becomes heterogeneous as the product accumulates. The Ion-temperature electronic absorption spectrum reveals that the reaction is phonon assisted by a polaron formed due to a strong electron- phonon coupling in the cxcited ¹nπ^* state.     

Electrical conduction nature and phase transition in CaTi1−x FexO3−δ (x = 0.1–0.5)

Transport numbers for oxygen ions and protons are measured by an emf method in the system CaTi_1?x Fe_xO_3?δ (x = 0.1–0.5) in the oxidizing and reducing atmospheres in the temperature interval 973–1173 K. It is shown that the compounds under study are mixed ion-electron conductors at small iron concentrations and electron conductors, at large iron contents. The proton conductivity in the compounds is very poor and does not exceed 0.5% in air. On the basis of the temperature dependences of transport numbers for ions and linear expansion, it is established that the CaTi_0.9Fe_0.1O_3?δ system has a phase transition of a second order in a reducing environment at 1020–1050 K. The total and partial electron conductivities of CaTi_0.9Fe_0.1O_3?δ are studied as a function of the partial pressure of oxygen at 1173 K. The nature of electroconduction in CaTi_1?x Fe_xO_3?δ is discussed.     

一种新型双亚胺吡啶铁系催化剂的乙烯低聚研究

线性α 烯烃广泛地应用于洗涤剂、增塑剂、润滑油等精细化学品的合成以及作为共单体制备线性低密度聚乙烯 (ＬＬＤＰＥ) .目前工业上主要是应用ＳＨＯＰ法[1] 、Ｃｈｅｖｒｏｎ工艺和Ａｍｏｃｏ工艺[2 ] 通过乙烯低聚制备 .近些年发展起来的新型高活性后过渡金属乙烯低聚催化剂能够高选择性地制备线性α 烯烃[3 ,4] .Ｂｒｏｏｋｈａｒｔ等[4] 的研究表明 ,对于双亚胺吡啶铁系乙烯聚合催化剂而言 ,配体上苯基的邻位取代基位阻减小可以实现乙烯低聚 ,并具有高活性、高选择性以及理想的低聚产物分布 .本文的工作是从配体的空间位阻效应对催化剂…     

Determination of nickel in the serum of occupationally exposed workers, by means of flame atomic-absorption spectroscopy

A flame atomic-absorption spectroscopy method for determination of nickel in the serum of occupationally exposed subjects has been developed. Trichloroacetic add is utilized for precipitating proteins and freeing bound nickel; sodium diethyldithiocarbamate is used as complexing agent and isopropyl acetate as the solvent for extraction. The method is characterized by good accuracy, precision and sensitivity, over a concentration range up to about 20 ng/ml. Calcium, which is present in serum in great excess with respect to typical nickel concentrations, does not interfere in the determination of the latter.     

High-performance liquid chromatography with continuous gradient elution in screening for unknown metabolites of butoprozine directly in dog bile

This paper describes the screening for metabolites of butoprozine, a new anti-anginal drug, in dog bile by means of reverse-phase HPLC. Although it does involve a simple clean-up step to remove a substantial amount of endogenous bile compounds, this screening method nevertheless avoids extraction of metabolites and thus allows all metabolites to be introduced into the chromatographic system. A single run of 100 minutes from 100% water to 100% methanol in a linear gradient effects adequate separation of the great majority of metabolites without interference from remaining endogenous compounds. Two methods of differentiating between metabolite peaks and endogenous peaks have been worked out. The first one makes use of ¹⁴C-labeled butoprozine by measuring the amount of radioactivity in the column effluent while simultaneously recording the UV absorbance. The second method compares continuous gradient chromatograms of bile recorded before and after butoprozine administration under very similar conditions. The latter method can be applied to both radioactive and non-radioactive materials.     

Modification of a packed column gas chromatograph/mass spectrometer

A packed-column gas-chromatograph/mass-spectrometer (GC/MS), Hewlett-Packard 5982, was modified to accommodate fused silica capillary columns. The original GC/MS interface and chemical-ionization sample-line in the ion-source were changed to allow the end of a fused silica capillary column to enter the ion-chamber directly. For chemical-ionization operation, the reagent gas was brought into the MS through the direct-insertion probe port. The calibration compound was introduced through the electron-impact sample-inlet, which simplified the operation. The modified system yields higher sensitivity and more efficient separation, as well as simpler operation, without sacrificing any original instrument functions.     

Glass capillary columns for separation of free organic acids

Glass capillary columns have been prepared without acidic additive in the stationary phase, from which free organic acids elute as sharp and symmetrical peaks. The required surface in the borosilicate glass capillary was generated by a combination of leaching with aqueous HCl and deposition of colloidal silica particles; it can be coated with stationary phases have a broad range of polarity. Aqueous samples containing free organic acids can also be analyzed in such columns in an isothermal mode.     

Dichlorohydantoin and dibromohydantoin as new oxidimetric titrants in non-aqueous media

Two new oxidimetric titrants, dichlorohydantoin and dibromohydantoin are introduced for use in acetic acid medium, and have been applied to direct potentiometric titration of AS(III), Sb(III), Sn(II), Fe(II), Tl(I), Fe(CN)(6)(4-), I(-), SCN(-), hydrazine, phenylhydrazine, semicarbazide, hydroquinone, oxine and Reinecke's salt, in aqueous acetic acid medium.     

Separation and determination of aluminium by single-column ion-chromatography

A quick, reliable method for the determination of Al(III) in the presence of other metal ions is presented. A Chromatographic system consisting of a low-capacity cation-exchange column, an eluent of diprotonated p-phenylenediamine, and a conductivity detector was used to measure the retention times for various cations. During the course of this work, it was found that Al(III) was eluted later than most bivalent metal ions but earlier than other tervalent metal ions. Therefore the concentration of eluent was adjusted so that an early sharp peak was obtained for Al(III) and the bivalent metal ions were eluted as a group. Through analysis of an NBS standard, as well as of solutions containing Al(III) and other metal ions, the method was shown to be precise, accurate and rapid for determination of Al(III) without interference from common bivalent metal ions.     

Polychloroprene rubbers used for adhesives: a small angle X-ray scattering preliminary investigation under stretching

Summary Three types of polychloroprene rubbers (Du Pont de Nemours Co. Neoprenes AD, WHV and W) used for adhesives and having different crystallization rates have been investigated.The mechanical properties of the Neoprenes samples were determined and the films were examined under stretching by SAXS for a preliminary investigation on their different superreticular order.

---

Zusammenfassung Drei Typen von Polychloropren-Kautschuk mit verschiedener Kristallisationsgeschwindigkeit (Neoprene AD, WHV und W von Du Pont de Nemours), die als Klebemittel dienen, wurden als gedehnte Filme mechanisch und röntgenographisch (SAXS) untersucht. Sie zeigen Unterschiede in der Überstruktur.