时滞种群模型的正周期解对所有正解的吸引性

建立了对数种群模型Ｎ′（ｔ）＝Ｎ（ｔ）｛ｒ（ｔ）－ａ１（ｔ）ｌｎ［Ｎ（ｔ）］－ａ２（ｔ）ｌｎ［Ｎ（ｔ－τ（ｔ））］｝的周期正解的存在性，并得到了正周期解对所有正解的吸引性．     

Estimating the Scale Parameter of a Lévy-stable Distribution via the Extreme Value Approach

The characteristic exponent α of a Lévy-stable law S _α (σ, β, μ) was thoroughly studied as the extreme value index of a heavy tailed distribution. For 1 < α < 2, Peng (Statist. Probab. Lett. 52: 255–264, 2001) has proposed, via the extreme value approach, an asymptotically normal estimator for the location parameter μ. In this paper, we derive by the same approach, an estimator for the scale parameter σ and we discuss its limiting behavior.      

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Scale invariance rule in electromagnetic scattering

The volume integral equation formalism is used to prove the scale invariance rule for an arbitrarily sized scatterer with an arbitrary shape, morphology, and orientation. The only assumptions are that the scatterer is made of optically isotropic linear materials and is embedded in a homogeneous, linear, isotropic, and nonabsorbing infinite medium.     

Development and validation of an analytical methodology for the determination of p,p′-DDT, p,p′-DDE and p,p′-DDD in fish oil pills

An analytical methodology was proposed and validated to be applied to the determination of p,p′-DDT and its metabolites p,p′-DDE and p,p′-DDD in fish oil. The analytical procedure presented in this paper involves a single-step clean up process prior to the analysis. A solution of 1,2,3,4-tetrachloronaphtalene was used as internal standard.The analytical technique used was gas chromatography coupled to an electron capture detector. Details on the validation process are provided.The limits of detection ranged from 2.6 to 4.7 pg μL^− 1. The BCR 598 standard reference material (cod liver oil) was used to evaluate the performance of the methodology with satisfactory recoveries for all the compounds.The analytes were determined in three different fish oil pills sold in Spain as a supplementary vitamin support. The sum of p,p′-DDT and metabolites was from 13.2 to 51.3 ng g^− 1, the dominant compound being p,p′-DDE.     

Dual-column GC analysis of mediterranean fish for ten organochlorine pesticides and sixty two chlorobiphenyls

The simultaneous analysis of α-HCH, β-HCH, γ-HCH, HCB, p,p′-DDD, p,p′-DDT, p,p′-DDE, o,p′-DDT, mirex, dieldrin and 62 chlorobiphenyl congeners on two parallel capillary GC columns of different polarity is described for nine Mediterranean fish species. Ten commercially available columns with stationary phases completely characterized in respect of their PCB elution patterns were considered for dual-column GC-ECD analysis. The combination of a 60 m × 0.25 mm i.d. column coated with a 0.25 μm film of 50% diphenyl dimethylsiloxane and a series combination of a 25 m × 0.25 mm i.d. column coated with a 0.25 μm film of 5% diphenyl dimethylsiloxane with a 25 m × 0.22 mm i.d. column coated with a 0.10 μm film of 1, 10-dicarba-closo-dodecarborane dimethylpolysiloxane furnished the highest number of separated chlorobiphenyl congeners (104). The dual-column GC system performed with high stability and reproducibility over a broad concentration range (1–3000 ng/g lipid) of the organochlorine compounds in the investigated fish.     

合成产物PEPAMP及其副产物的电喷雾串联质谱分析

PEPAMP是应用于工业循环水中的新一代高效阻垢剂.采用电喷雾电离质谱和质谱/质谱技术分析了合成产物,注射泵直接进样,正离子方式检测,方法简便、快速.通过EI-MS技术获得了目标产物PEPAMP及主要副产物的准分子离子峰,通过ESI-MS-MS技术获得了其碎片信息,并对目标化合物及主要副产物进行了精确质量测定,确定了目标化合物及主要副产物的结构.     

甲苯胺蓝共振光散射法测定纳克级脱氧核糖核酸

研究了吩噻嗪类染料甲苯胺蓝 (TB)与DNA作用的共振光散射光谱 ,在pH 1 0～ 1 1的范围内 ,加入DNA导致甲苯胺蓝共振光散射增强 ,在 35 0nm处 ,存在一共振光散射增强峰 ,其强度与DNA浓度呈线性关系 ,据此建立了一种测定DNA的共振光散射法。对于ctDNA ,方法的线性范围为 0～ 90 0ng·mL-1 ,检出限为6 75ng·mL-1 ,RSD为 3 7% ;对于fsDNA ,方法的线性范围为 0～ 90 0ng·mL-1 ,检出限为 2 99ng·mL-1 ,RSD为 5 6 % .已用于合成样品中DNA的测定     

Higgs–Dilaton cosmology: Are there extra relativistic species?

Recent analyses of cosmological data suggest the presence of an extra relativistic component beyond the Standard Model content. The Higgs–Dilaton cosmological model predicts the existence of a massless particle – the dilaton – associated with the spontaneous symmetry breaking of scale invariance and undetectable by any accelerator experiment. Its ultrarelativistic character makes it a suitable candidate for contributing to the effective number of light degrees of freedom in the Universe. In this Letter we analyze the dilaton production at the (p)reheating stage right after inflation and conclude that no extra relativistic degrees of freedom beyond those already present in the Standard Model are expected within the simplest Higgs–Dilaton scenario. The elusive dilaton remains thus essentially undetectable by any particle physics experiment or cosmological observation.     

Comparison of scale factor estimators for ultrasonic temperature monitoring: Application to structural health monitoring

In Structural Health Monitoring (SHM) of materials, estimating the effects of environmental and operational conditions such as temperature is important. Indeed, temperature changes induce modifications of the mechanical properties of the material and therefore cause a dilation of the acoustic signals characterized by a scale factor. This paper described four scale factor estimators able to monitor changes in temperature: The short-time cross-correlation (STXC) method, the stretching method (STRE), the Minimum Variance Based Estimator method (MVBE) and the Scale Transform Based Estimator method (STBE). The first two methods have already been assessed in the literature while the latter two have been specifically developed for this study. First, closed-form for the Cramer-Rao bound on the estimates of the scale factor, from a simplified deterministic signal, are derived and simplified expressions are given. Then, a statistical evaluation of the quality of estimates is conducted through Monte-Carlo simulations using synthetic signals, based on a model taking into account the influence of temperature. A raw estimate of the computational complexity of signal processing methods also completes this evaluation phase. Finally, the experimental validation of estimation methods is conducted on an aluminum plate subjected to temperatures variations in a controlled thermal environment. The temperature estimates are then faced with an analytical model describing the material behavior.