Transport properties of separating membranes MF-4SK during alkaline electrolysis of water

The transport properties of separating membranes MF-4SK are studied during electrolysis of H₂O in solutions of KOH. The effective diffusion coefficients of molecules of KOH and H₂O and the transfer coefficients of ions K⁺ and OH^? and molecules of H₂O are measured at KOH concentrations reaching 11 M, currents reaching 0.31 A cm^?2, at ambient temperature and at 80°C. In contact with a KOH solution in the concentration interval 0.1 to 11 M, the membranes that initially swelled in H₂O lose a considerable fraction of water that was present in them and the overall volume of clusters and solution-filled channels in them noticeably decreases. The coefficients of transfer by current of ions K⁺ out of anodic compartment into cathodic and the OH^? ions in the reverse direction, respectively, happen to be equal to about 0.6 and 0.4 at ambient temperature and 0.8 and 0.2 at 80°C. The coefficients of transfer of water molecules out of the anodic volume into the cathodic volume in the process of electrolysis happen to be in the limits 1.6–1.9 at ambient temperature and in the limits 2.2–2.8 at 80°C. The effective diffusion coefficients of molecules of KOH and H₂O at moderate concentrations of KOH (5.6 M) amount to ～2.6 × 10^?7 and 30 × 10^?7 cm²s^?1 at ambient temperature and ～4 × 10^?7 and 61 × 10^?7 cm²s^?1 at 80°C, respectively. At a high concentration of KOH (～10 M) these quantities substantially diminish.     

Mixed hybrid bilayer lipid membrane incorporating valinomycin: improvements in preparation and functioning

The paper deals with the reconstruction of lipid bilayer membranes on a Au-covered polycarbonate membrane. Such a kind of like-biomembranes (namely mixed hybrid bilayer lipid membrane (MHBLM)) are characterised by appreciable long-term stability. Here we describe changes that have been made in the geometry of the experimental device in order to avoid artefacts and render membrane reproduction easier. Incorporation of valinomycin was performed to check the membrane and its stability: conductance and membrane potential following the changes of ion concentration were recorded. This new approach permits increase of successful trials and renders possible, when it breaks, easily formation of a new MHBLM on the same Au-covered polycarbonate membrane support. Finally, the stability shown by the MHBLM renders this system a promising tool for use under flowing conditions.     

Synthesis and characterization of SPE membrane based on sulfonated FEP‐g‐acrylic acid by radiation induced graft copolymerization for PEM fuel cell

A Novel solid polymer electrolyte (SPE) membrane containing both ? COOH and ? SO₃H group has been prepared by simultaneous method of radiation grafting of acrylic acid onto FEP followed by sulfonation. The presence of weakly acidic acrylic acid controls the swelling in water while ? SO₃H group provides conductivity due to its strongly ionic characteristic. FEP‐g‐acrylic acid and its sulfonated derivatives were characterized by their properties. While the mechanical properties decreased, other properties such as ion exchange capacity (IEC), water uptake and ionic conductivity increased with increase in graft content. These properties further changed on sulfonation. Acrylic acid being weakly acidic in nature, conductivity values of the grafted membrane were quite low. However, introduction of strong ? SO₃H group resulted in conductivity closer to Nafion 117. Few sulfonated membranes have been tested with respect to H₂/O₂ fuel cell performance. Short‐term fuel cell test for 100 hr gave a stable performance. These membranes are less expensive compared to Nafion. Copyright © 2004 John Wiley & Sons, Ltd.     

POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

Electrokinetic investigations of charged porous membranes

Asymmetric ultrafiltration membranes were prepared from fully aromatic polyamides differing in the diamine monomers of the polymeric backbone and from polysulfone. Nanofiltration membranes were made from polysulfone and polyethersulfone. The polysulfone as well as the polyethersulfone were chemically modified to change the surface charges of the membranes that were made from these polymers. This means neutral, positively as well as negatively charged membranes could be employed for the measurements. The surface properties of the membranes as a function of pH were determined by measuring the streaming potential in a perpendicular and horizontal mode. Applying proteins the values of the streaming potential changed depending on the original charges of the membranes as well as on the pH of the solution. The values shifted to either higher or lower absolute values. Thus, characterization of unused and used membranes can be carried out by electrokinetic measurements. This was also demonstrated using a membrane fitted out with invertase. The zeta potential of nanofiltration membranes, however, was only evaluated from the results obtained with the horizontally run cell.     

Simulations of the active transport of a neutral solute based on a kinase-channel-phosphatase topology

Simulations of coupled interactions involving two opposite enzymatic reactions, solute diffusions, and electrostatic interactions between membrane charges and charged solutes were conducted under a fixed kinase-channel-phosphatase (KCP) topology oriented from the outside to the inside of a porous membrane structure. Depending on the kinase and phosphatase locations, we recently demonstrated that an active transport of a phosphorylated substrate may occur via the opposite topology, that is, a PCK topology. The present analysis demonstrates that, under a KCP membrane topology, which also behaves as a specific ATP-dependent transporter, the active transport of a neutral substrate may occur. This analogous active transport appears to be dependent on the phosphatase location and on the membrane surface potentials. A broad analysis of the role played by the main parameters taken into account in the model was conducted in order to define precisely the physico-chemical conditions and the membrane topology needed for the highest active transports within the shortest time.     

Effect of using mixed ion-pairs on PVC-membrane electrodes for ephedrine

Mixed ion-pairs based on the use of ephedrinium (EPH)-TPB plus EPH-reineckate (II) and phenylephrine-TPB plus EPH-reineckate (III) were tried for use in plastic membranes. The results were compared to those of an EPH-reineckate (I) single ion-pair electrode. The Nernstian slopes were 50, 49 and 55 mV decade^–1 for membranes I, II and III, respectively. The linear concentration ranges were 10^–5–10^–1, 4.0 × 10^–5–10^–1 and 6.3 ×^–5–10^–1 M ephedrine. The detection limits were 4 ×^–6,10^–5 and 1.2 × 10^–5 M ephedrine for membranes I, II and III, respectively. The pH ranges were 4–9, 3–9 and 2–8 for I, II and III-membranes, respectively. Selectivity coefficient values for membrane II were better than those for membranes I and III. The effects of increasing KC1 concentration and temperature changes were explained for the three electrodes. The isothermal temperature coefficients were 0.00145, 0.0007 and 0.00055 V/ °C for electrodes I, II and III. Electrode III was applied for the determination of ephedrine in its pharmeaceutical preparations with an overall relative standard deviation range of 1.3–2.4% and an overall mean recovery value of 98.1%.     

Kinetics of epidermal growth factor/receptor binding on cells measured by total internal reflection/fluorescence recovery after photobleaching

Total internal reflection fluorescence (TIRF) microscopy is used to measure the dissociation kinetic rate of fluorescein-labeled epidermal growth factor from its specific receptors on the surface of intact but mildly fixed A431 human epidermoid cells in culture. Prior applications of TIRF microscopy have been limited to nonreceptor binding or to model membrane systems. The evanescent field excites fluorescence selectively at the surface of the cell proximal to the coverslip. Prismless epiillumination TIR is employed to avoid space limitations and is achieved by passing the excitation laser beam through a high (1.4)-aperture objective so that the light is incident at the glass/water interface beyond the critical angle. Long-term focus is maintained by a special feedback system. Of the possible effects that can influence the time course of the postbleach fluorescence recoveries—the EGF/receptor dissociation ratek ₂, the bulk solution diffusion rate of EGF, and the cell surface motion of the receptors—we infer that the dissociation ratek ₂ dominates. Several fitting schemes are compared and indicate the presence of a multiplicity of values fork ₂, ranging from about 0.05 to 0.004 s^–1, with an average value of about 0.012 s^–1. These results compare well with values previously obtained by radiolabel/washing techniques. The significance of the results in terms of kinetic models and the advantages of the TIRF technique for these sorts of measurements are discussed.