Proton ionizable crown compounds. 18. Comparison of alkali metal transport in a H2O-CH2Cl2-H2O liquid membrane system by four proton-ionizable macrocycles containing the dialkylhydrogenphosphate moiety

The macrocycle-mediated fluxes of alkali, alkaline earth, and several transition metal cations have been determined and compared in a H₂O-CH₂Cl₂-H₂O liquid membrane system using four water-insoluble macrocycles containing a dialkylhydrogenphosphate moiety. Transport of alkali metal cations by these ligands was greatest from a source phase pH = 12 or above into an acid receiving phase (pH = 1.5). Very low fluxes were observed for the transport of the alkaline earth cations and all transition metal ions studied except Ag⁺ and Pb²⁺ which were transported reasonably well by these new macrocycles.Deceased: September 5, 1987.     

Fouling and protein adsorption effect of low-temperature plasma treatment of membrane surfaces

Adsorption of proteins and the effect of the chemical nature of membrane surfaces on protein adsorption were investigated using¹⁴C-tagged albumin and several microporous membranes (polyvinilydene fluoride, PVDF; nylon; polypropylene, PP; and polycarbonate, PC). The membrane surfaces were modified by exposing them to low-temperature plasma of several different monomers (n-butane, oxygen, nitrogen alone or as mixtures) in a radiofrequency plasma reactor. Transients in the permeability of albumin solutions through the membranes and changes in flux of distilled water through the membranes before and after adsorption of albumin were used to investigate the role of protein adsorption on membrane fouling. The results show that the extent of adsorption of albumin on hydrophobic membranes was considerably more than that on hydrophilic membranes. The hydrophilic membranes were susceptible to electrostatic interactions and less prone to fouling. A pore-blocking model was successfully used to correlate the loss of water flux through pores of defined geometry     

MORPHOLOGIES AND GAS SEPARATION PROPERTIES OF MELT-SPUN ASYMMETRIC POLY(4-METHYL-1-PENTENE)HOLLOW FIBER MEMBRANES*

Poly(4-methyl-1-pentene) (PMP) hollow fiber membranes were prepared by the melt-spun and cold-stretch(MSCS) method. Scanning electronic microscopy (SEM) was used to characterize the section and surface structures of themembranes with special asymmetric structure. The preliminary results of gas permeation measurements indicated that the resultant hollow fiber membranes have the potential ability for oxygen/nitrogen separation.     

Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.     

Time‐resolved Fourier transform infrared/attenuated total reflection spectroscopy for the measurement of molecular diffusion in polymers

Over the past 2 decades, the use of time‐resolved Fourier transform infrared/attenuated total reflection (ATR) spectroscopy for the measurement of diffusion in polymers has grown. ATR is a powerful technique for the measurement of diffusion in polymers because it is an in situ technique that is relatively inexpensive, provides reliable short‐time data, and provides a wealth of information at the molecular level. This article highlights the technique and its application to numerous studies, ranging from the diffusion of drugs in human skin to chemical warfare agents in barrier materials. In addition to these topics, recent studies with ATR to quantify and model molecular interactions during the diffusion process are reviewed. In the future, the ATR technique may have an impact on a variety of emerging fields in which diffusion in polymers plays an important role, such as fuel cells, membrane separation, sensors, and drug delivery. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2794–2807, 2003     

Antifouling ultrafiltration membrane composed of polyethersulfone and sulfobetaine copolymer

A new random copolymer was synthesized by reacting hydrophilic N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) (DMMSA) with hydrophobic butyl methacrylate (BMA) through a conventional radical polymerization. The as-prepared sulfobetaine copolymer (DMMSA–BMA) was blended with polyethersulfone (PES) to fabricate antifouling ultrafiltration membrane for BSA separation. The X-ray photoelectron spectroscopy analysis of blend membranes revealed concentration of sulfobetaine groups at the membrane surfaces that endowed the membrane with higher hydrophilicity and better antifouling property. For the membrane with 8.0 wt% DMMSA–BMA copolymer concentration (No. 5), irreversible fouling has been considerably reduced and the flux recovery rate of the blend membrane reached as high as 82.8%. Furthermore, the blend membrane could effectively resist BSA fouling in a wide pH range from 4.0 to 8.0.     

Quantitative determination of paraffin oil in blood by capillary gas chromatography

A capillary gas chromatographic method is described for the quantitative determination of liquid paraffin in blood. Paraffin is extracted from blood into n-heptane. After solvent evaporation and dissolution of the residue in 100–200 μl n-heptane one μl is injected into a gas chromatograph fitted with a fused silica capillary column (Permabond® OV-1-CB-0.1, 10 m × 0.32 mm i.d.) and flame ionization detector. Analysis is performed by using an oven program [50°C (3 min)?285°C (5 min), rise 10%min]. The sensitivity (1.5 ng hexadecane) and the reproducibility prove the applicability of the method for the determination of liquid paraffin in blood and for the study of the stability of the liquid paraffin hollow fiber membranes used in an extracorporeal liver support system.     

The melt hollow fiber spinning process: steady-state behavior,sensitivity and stability

The rheology of the melt hollow fiber spinning process is examined in the thin filament limit. The resulting thin filament equations are also applicable to single-phase and two-phase extensional flows. Using a novel numerical solution procedure, the sensitivity of the fiber spinning equations to material property and process variations is investigated. Fiber geometry is directly controlled by the mass flowrates of the core and clad fluids while the spinline tension is most strongly influenced by clad viscosity. A maximum can occur in the clad stress profile if a core liquid is used and the ratio of core to clad viscosity increases greatly with temperature. Isothermal spinning of high viscosity clad liquids with either a core gas or liquid is unstable for draw ratios greater than 20.2 as found for solid fibers.     

Determining moisture absorption/desorption properties of commercial membranes by thermogravimetry (TG)

A series of different commercial membranes were characterized by their moisture absorption and desorption properties under controlled humidity and temperature conditions. This work was made possible by combining the features of a constant humidity conditioning chamber with those of a thermogravimetric (TG) apparatus. These two modules were interconnected by tubing, rotameters, an atmosphere-recycling microbellows pump and switching valves. Under programmed heating and isothermal conditions reproducible data were obtained in terms of weight-gain or weight-lossvs. time and pore size. Evaluation of the resulting TG curves allowed us to report reasonable differences in the materials, some of which had been previously surface-modified by the manufacturer.     

表面活性剂对铽—钛铁试剂体系纸上荧光的增敏作用及其应用

本文研究了9种表面活性剂对钛铁试剂体系纸上荧光法中Tb~(3+)特征荧光的增敏作用,并探讨了钛铁试剂-溴化十六烷基三甲胺体系纸上荧光法测定Tb~(3+)的最佳条件,Tb~(3+)的检测限为0.7ng。应用本方法成功地测定了中稀土分离富集物中Tb_4O_7的含量。