Self-assembled multilayer films of poor water-soluble copper(II) complexes constructed from dipyrido[3,2-d:2′,3′-f]quinoxaline (Dpq) ligand as well as their fluorescent properties

New multilayer films were prepared by alternating adsorption of poly(sodium 4-styrenesulfonate) (PSS) and a new complex of [Cu₂(Dpq)₂(Ac)₂(H₂O)₂] (ClO₄)₂·H₂O (1) (Dpq=dipyrido[3,2-d:2′,3′-f]quinoxaline, Ac=acetate) or a related complex [Cu(Dpq)₂(H₂O)] (ClO₄)₂·H₂O (1a) by electrostatic layer-by-layer self-assembly technique, respectively. Compounds 1 and 1a have been synthesized and structurally characterized by elemental analyses, IR spectroscopy, and single-crystal X-ray diffraction analyses. Single-crystal X-ray analyses show that complexes 1 and 1a possess a dinuclear and a mononuclear structure, respectively, which are further extended into layered frameworks by π-π stacking and hydrogen-bonding interactions. The multilayer films were characterized by UV-vis spectroscopy, fluorescence spectroscopy, small-angle X-ray reflectivity measurements, and atomic force microscopy (AFM) imaging. UV spectroscopy shows that the deposition process is regular and highly reproducible from layer to layer. AFM image indicates that the film surface is uniform and smooth. The fluorescent properties of the films were studied and the results showed that the forming condition of the films had great influence on their properties.     

Effects of sol-gel processing parameters on the phases and microstructures of HA films

Bioactive hydroxyapatite (HA) films were fabricated by a sol–gel method and triethylphosphate and calcium nitrate were used as the phosphorus and calcium precursors, respectively. The effects of the heat treatment temperature, pH level and substrate materials on the phases and microstructures of HA films were studied by X-ray diffraction (XRD), scanning electronic microscopy (SEM) and electronic probe microanalysis (EPMA) and so on. The results show that all the sol–gel films are composed of the phases of HA, CaO, TiO₂ and CaTiO₃. With increasing the calcining temperature, the crystallinity of the films increases, the structure becomes more compact and changes from granular and lamellar to cellular structure, and the Ca/P ratio increases slightly because of the loss of P in the films. The addition of ammonia (adjusting the pH level to be about 7.5) can increase the HA content in the films, and the difference of substrate materials only has a little influence on the microstructure of the sol–gel films.     

LOW POTENTIAL ELECTROPOLYMERIZATION OF ANISOTROPIC CONDUCTIVE POLYTHIOPHENE FILMS AND FABRICATION OF ELECTRICAL DEVICES

The complexation of thiophene with a Lewis acid with moderate acidity as a solvent, such as BF_3-ethyl ether (BFEE) remarkedly lowered the electrochemical polymerization potential. The positively chargedmetal surface of electrode in the process of electrochemical deposition enhanced the coordination interactionbetween π-electrons of thiophene unit and the metal, which makes thiophene rings lie parallel to the surfaceof electrode, resulting in a highly ordered polymeric structure. Because of the large intra-chain transferintegrals, the transport of charge is believed to be principally along the conjugated chains, which is muchgreater than the inter-chain hopping. The specific electrical resistance across the polythiophene film thicknessis more than 10~4 times than that along the surface plane of the film. In this paper we review the recentdevelopment of polymerization technique by low potential electrochemical method performed in our lab andseveral electrical devices in which the compact polythiophene films, such as anionic and cationic sieves, andlaminate film junction of undoped polythiophene derivatives were used.     

不同类型蒸发源对平面夹具薄膜均匀性的影响

 分析了几种可能的实际蒸发源与薄膜均匀性的关系,其中包括扩展的平面蒸发源和曲面蒸发源。通过实验论证了薄膜均匀性对蒸发源尺寸和蒸发特性的依赖关系。得到的分析结果表明：当蒸发源半径和夹具高度的比值小于1/17时,蒸发源可以被视为一个点面源;大于 1/10时,应当把蒸发源视为面面源进行考虑。当挖坑深度和蒸发源半径的比值介于0和0.5之间时,挖坑对薄膜均匀性造成的影响基本可以忽略;大于0.6时,挖坑效应明显影响薄膜的均匀性。     

Experimental and numerical study of the effect of conjugate heat transfer on film cooling

Combined convection heat transfer and thermal conduction for film cooling of a flat plate with 45° ribs on one wall was investigated experimentally and numerically. The flat plate surface temperature was measured using thermochromic liquid crystals. The results show that the film cooling is the main mechanism for the local cooling with a very low thermal conductivity while the convection heat transfer of the coolant in the coolant channel is the dominant heat transfer mechanism for the high thermal conductivity plate, with both film cooling and convection heat transfer by the coolant being important with medium thermal conductivity walls.     

On a damage law for creep rupture of clays with accumulated inelastic deviatoric strain as a damage measure

To avoid the dependency on origin of time, an improved damage law for creep rupture of clays is proposed considering the accumulated inelastic deviatoric strain as a measure of damage, instead of incorporating time directly. This law is incorporated into an existing anisotropic elastoplastic-viscoplastic bounding surface model for clays. The performance of the damage law was demonstrated via the simulations of creep rupture tests on undisturbed clays, and generally a good agreement between model simulations and test data was obtained. Discussions on the creep rupture parameters were followed and further improvement was suggested. At present when high quality test data for creep rupture is very limited, the proposed damage law could serve as a practical way to model creep rupture of clays.     

��ʪ�Լ��ų���Һ̬�������ɱ���Ĥ������״̬��Ӱ��

通过数值模拟及实验研究了润湿性及磁场对液态金属膜流流动状态的影响.首先,通过数值模拟研究了润湿性对膜流流动状态的影响.结果表明,当润湿性不好时,液态金属膜流容易发展为溪状流而不能完全覆盖底壁,入口膜厚较薄时更易发展为溪状流;在入口膜厚及其它情况相同时,密度越小越易发展为溪状流.其次,研究了磁场对膜流流动状态的影响.结果表明,槽道与流体润湿性不好时,有磁场情况下液态金属膜流覆盖底壁的区域较无磁场时增加,强磁场对膜流的湍流有抑制作用.最后,液态金属膜流实验结果表明,润湿性不好时,镓铟锡合金膜流容易收缩发展为溪状流,这与数值模拟的结果是一致的.上述研究结果对磁约束聚变堆液态第一壁的设计具有指导意义.     

A single theory for some quasi-static,supersonic, atomic,and tectonic scale applications of dislocations

We describe a model based on continuum mechanics that reduces the study of a significant class of problems of discrete dislocation dynamics to questions of the modern theory of continuum plasticity. As applications, we explore the questions of the existence of a Peierls stress in a continuum theory, dislocation annihilation, dislocation dissociation, finite-speed-of-propagation effects of elastic waves vis-a-vis dynamic dislocation fields, supersonic dislocation motion, and short-slip duration in rupture dynamics.     

Coherent structures in trailing-edge cooling and the challenge for turbulent heat transfer modelling

The present paper tests the capability of a standard Reynolds-Averaged Navier–Stokes (RANS) turbulence model for predicting the turbulent heat transfer in a generic trailing-edge situation with a cutback on the pressure side of the blade. The model investigated uses a gradient-diffusion assumption with a scalar turbulent-diffusivity and constant turbulent Prandtl number. High-fidelity Large-Eddy Simulations (LES) were performed for three blowing ratios to provide reliable target data and the mean velocity and eddy viscosity as input for the heat transfer model testing. Reasonably good agreement between the LES and recent experiments was achieved for mean flow and turbulence statistics. The LES yielded coherent structures which were analysed, in particular with respect to their effect on the turbulent heat transfer. For increasing blowing ratio, the LES replicated an also experimentally observed counter-intuitive decrease of the cooling effectiveness caused by the coherent structures becoming stronger. In contrast, the RANS turbulent heat transfer model failed in predicting this behaviour and yielded significantly too high cooling effectiveness. It is shown that the model cannot predict the strong upstream and wall-directed turbulent heat fluxes caused by large coherent structures, which were found to be responsible for the counter-intuitive decrease of the cooling effectiveness.     

The effect of total reflection in PLIF imaging of annular thin films

Planar laser-induced fluorescence (PLIF) imaging techniques are increasingly used to study wavy annular flows in vertical and horizontal pipes. We present a ray-tracing study that analyzes the imaging properties of the PLIF technique for uniform and wavy annular films. Part of the emitted fluorescence will hit the water–air interface at angles greater than the critical angle of total reflection. As a consequence, PLIF imaging probes the film twice: From bottom to top and then again from top to bottom. Deflected fluorescence widens PLIF images of uniform films by about 30%. Surface waves further increase the contribution of deflected rays to the overall signal. At the steep slopes of large amplitude axial waves, total reflection might widen PLIF signals by up to a factor of two.