非晶态硒化镉薄膜瞬态光电特性

本文报道用真空热蒸发法淀积的非晶态硒化镉薄膜作光敏介质制备超快光电导探测器。用对撞脉冲锁模Nd:YAG激光器产生的超短光脉冲序列对探测器的响应时间进行检测,结果表明a-CdSe薄膜对皮秒(10^-12秒)级的超短光脉冲作用具有良好的瞬态响应光电特性,探讨a-CdSe薄膜快速弛豫过程的内在机理。     

A novel approach to thermal Analysis of Thin films

A novel instrument is described called the Thin film Analyser (TFA) which quantitatively measures changes in mechanical and rheological properties of drying films in-situ on a test panel. It is based around a simple force-sensing device, capable of carrying various probes, which can be positioned in anX-Y plane over the panel. Temperature control is achieved by means of a heating block under the sample. By imposing a thermal gradient along the block, measurements can be obtained at a series of temperatures in a single experiment. Several applications of the TFA to the drying of curable and latex-based coatings are discussed, as well as some more specialized uses. The TFA concept represents a novel approach to the thermal analysis of thin films.The authors gratefully acknowledge the design, engineering and software development work of the Instrument Group at ICI Paints, in particular John Hayton, Neil Burrows, Tony Evans and Ian Francis, who have now built three versions of the TFA.     

X光光电子能谱法测定胶片中氟,硅和铝的研究

应用Ｘ光光电子能谱法测定了几种彩色胶片表面层中氟的１ｓ能级的结合能；分别比较了水处理前后、溅蚀前后胶片护膜层氟的变化，表明氟化物分布在护膜最表层，是一种易溶于水的氟化物；测定了彩色片护膜层所含硅２ｐ能级的结合能，与自制彩色片护膜层测定结果比较，优质片含一种较多负电性，用与自制片的无机硅不同的硅化物作毛面剂；对溅蚀前后优质片和自产彩色片中的硅铝比变化进行比较，提出优质彩色片Ｆ－４００的护膜层可能是双     

聚合物-Ni(II)膜电极的研究

Ni(Ⅱ)离子可与聚8羟基喹啉、聚邻氨基酚、聚邻苯二胺和聚苯胺络合。聚合物-Ni(Ⅱ)膜电极的循环伏安图有明显的氧化还原蜂, 和彼此相似的电化学特性。聚8羟基喹啉膜(聚邻氨基酚, 聚邻苯二胺)可用以交换Ni(Ⅱ)与H~+离子和分离Ni(Ⅱ)、Co(Ⅱ)和Fe(Ⅱ)离子。     

Effect of film thickness and supercooling on the performance of cholesteryl cinnamate liquid crystal capillary columns

Improved separations of the isomers of olefinic aliphatic insect pheromones were obtained on cholesteryl cinnamate glass capillary columns by operating in the supercooled temperature range of the liquid crystal. Capillary columns were prepared with varying film thickness of the stationary phase; choice of the correct film thickness ensured optimum retention for a wide range of compounds within the most effective temperature range of the liquid crystal. The deactivation procedures described made the liquid crystal columns suitable for separation of the geometric isomers of polar and nonpolar compounds.     

薄膜荧光传感器研究进展

按薄膜荧光传感器的制备方法, 从物理薄膜、化学薄膜和自组装单层膜等三个方面综述了近年来薄膜荧光传感器的研究进展. 在此基础上, 展望了薄膜荧光传感器的研究前景.     

Amperometric detection of hydrazine by cyclic voltammetry and flow injection analysis using ruthenium modified glassy carbon electrodes

Glassy carbon electrodes modified with (5-amino-1,10-phenanthroline)bis(bipyridine)ruthium(II) chloride hydrate, [(bpy)₂Ru(5-phenNH₂)]Cl₂·H₂O, are shown to oxidize hydrazine with excellent sensitivity. The presence of an amine group on the ruthenium complex facilitates electropolymerization onto the electrode surface. Using cyclic voltammetry, a large catalytic current is observed upon oxidation of hydrazine in phosphate buffer (pH 5.0), compared to the current obtained from the ruthenium-modified electrode with no hydrazine present. The sensitivity of cyclic voltammetry is sufficient for obtaining a linear calibration curve for hydrazine over the range of 10⁻⁵ to 10⁻² M. Hydrodynamic amperometry was used to determine the working potential for flow injection analysis. The limit of detection for hydrazine was determined to be 8.5 μM using FIA. The thickness of these films was shown to increase linearly with the number of electropolymerization cycles, in the range of 1000-2500 nm for 5-20 cycles, respectively, using Rutherford backscattering spectrometry (RBS). RBS analysis also suggests that the film is multilayered with the outermost layers containing a high ruthenium concentration, followed by layers where the concentration of ruthenium decreases linearly and approaches zero at the electrode surface.     

显微共焦拉曼光谱研究电化学合成聚苯胺膜

显微共焦拉曼技术被用来研究电化学合成的聚苯胺（PANI）膜. 研究结果表明：在不同的激发光聚焦深度，聚苯胺膜的拉曼光谱有明显变化.从而反映出聚苯胺膜的掺杂程度在膜生长过程中随膜厚度的增长而增加. 并由X射线电子能谱（XPS）和紫外吸收光谱（UV）分析证实.     

拉伸热历史对取向聚对苯二甲酸乙二酯膜在热处理过程中收缩和伸长的影响

弄清取向非晶态聚合物在热处理过程中的收缩和伸长的变化规律,以及所对应的结构变化,有较大的实用意义和科学意义。 对于取向聚对苯二甲酸乙二酯的热收缩和热伸长已有很多研究,但对于拉伸热历史对取向PET在热处理过程中的尺寸变化的影响尚缺乏系统的研究。在热拉伸的过程中发生分子链的取向、热弛豫和结晶三个相互竞争的过程。因此,改变拉伸条件可以得到具有各种不同取向和结晶的PET试样。当非晶态PET膜片在80-105℃以较低     

采用Seemann－Bohlin准聚焦X射线衍射仪测量薄膜厚度的误差理论分析

本文从理论上分析了衍射强度比偏差Δ（Ｉ／Ｉ∞）和衍射峰位偏差Δ２θ对Ｓｅｅｍａｎｎ－Ｂｏｈｌｉｎ准聚焦Ｘ射线衍射仪测量表面单层薄膜厚度误差的影响。分析结果表明，降低Δ（Ｉ／Ｉ∞）可提高膜厚的测量精度，在Δ（Ｉ／Ｉ∞）－定的情况下，按μρｔ［Ｓｉｎ（－１）γ＋Ｓｉｎ（－１）（２θ－γ）］＝１选择靶辐射和衍射晶面可使由Δ（Ｉ／Ｉ∞）导致的膜厚测量误差具有极小值；选择高角度衍射线有助于减小试样离焦引起的衍射峰位偏差，亦可降低因衍射角测量偏差导致的膜厚测量误差，当衍射线处于薄膜的法向２θ＝γ＋π／２时，角度项误差（Δｔ／ｔ）（２θ）完全消除。