CVD synthesis of nitrogen doped carbon nanotubes using ferrocene/aniline mixtures

Nitrogen doped carbon nanotubes (N-CNTs) have been synthesized by the chemical vapour deposition (CVD) floating catalyst method using either 4-ferrocenylaniline or mixtures of varying concentrations of ferrocene/aniline together with toluene as added carbon source. The N-CNTs produced are less stable (thermal gravimetric analysis measurements), less graphitic and more disordered (transmission electron microscope measurements) than their undoped counterparts. The ratio of the Raman D- and G-band intensities increase with the nitrogen concentration used during the CNT growth. Furthermore, the transmission electron microscope (TEM) studies reveal that the CNTs are multi-walled (MW), and that the diameters of the N-MWCNTs can be controlled by systematically varying the concentrations of the nitrogen source. The TEM analysis also revealed that when ferrocenylaniline and ferrocene/aniline reactions are compared at similar Fe/N ratios, higher N doping levels are achieved (ca. 2-5×) when ferrocenylaniline is the catalyst.     

“Through-space” P spin-spin couplings in ferrocenyl tetraphosphine coordination complexes: Improvement in the determination of the distance dependence of JPP constants

From the analysis of several nickel and palladium halide complexes of a constrained ferrocenyl tetraphosphine, the existence in solution phase of unique ³¹P-³¹P “through-space” nuclear spin-spin coupling constants (J_PP) had been previously evidenced. Due to the blocked conformation of the species in solution, and based on the NMR spectra obtained for the complexes and their corresponding solid state X-ray structures, these J_PP constants had been shown to clearly depend on the mutual spatial position of the corresponding phosphorus atoms. Herein, the quantitative correlation disclosed at that time (P?P distance dependence of coupling constants) is remarkably confirmed, and mathematically refined owing to the study of a new palladium dibromide tetraphosphine complex, for which the synthesis and the solution NMR and solid state X-ray characterizations are reported.     

Synthesis of tungsten compounds with Schiff base ligands prepared from ferrocenecarboxaldehyde: Observation of the migration of an imine double bond

The one-pot reactions of ferrocenecarboxaldehyde, W(CO)₄(pip)₂ (pip = piperidine) and either 2-(aminomethyl)pyridine or 2-(2-aminoethyl)pyridine lead to clean formation of pyridine imine products W(CO)₄(η²-NC₅H₄CHNCH₂C₅H₄FeCp) (1) and W(CO)₄(η²-NC₅H₄C₂H₄NCHC₅H₄FeCp) (2), respectively. Crystal structures of the two compounds show that in 1 the imine double bond has migrated so that it is conjugated with the pyridine ring while in 2 the imine double bond remains conjugated with the cyclopentadienyl ring. This finding is reinforced by a comparison of dihedral angles in each molecule. IR, NMR and electronic spectra each highlight the differences between the two compounds. Crystal data for C₂₁H₁₆FeN₂O₄W (1): monoclinic P2(1)/c, a = 12.768(2) Å, b = 13.593(2) Å, c = 12.981(2) Å, β = 119.46°, V = 1961.6(4) Å³, Z = 4; C₂₂H₁₈FeN₂O₄W (2): monoclinic P2(1)/c, a = 16.759(1) Å, b = 8.8612(7) Å, c = 13.802(1) Å, β = 95.998(1)°, V = 2038.4(3) Å³, Z = 4.     

Charge Density Overcomes Steric Hindrance of Ferrocene Surfactant in Switchable Oil-in-Dispersion Emulsions

A ferrocene surfactant can be switched between single and double head form (FcN⁺C₁₂/Fc⁺N⁺C₁₂) triggered by redox reaction. FcN⁺C₁₂ can neither stabilize an O/W emulsion alone nor an oil-in-dispersion emulsion in combination with alumina nanoparticles due to the steric hindrance of the ferrocene group. However, such steric hindrance can be overcome by increasing the charge density in Fc⁺N⁺C₁₂, so that oil-in-dispersion emulsions can be co-stabilized by Fc⁺N⁺C₁₂ and alumina nanoparticles at very low concentrations (1×10⁻⁷ M (≈50 ppb) and 0.001 wt %, respectively). Not only can reversible formation/destabilization of oil-in-dispersion emulsions be achieved by redox reaction, but also reversible transformation between oil-in-dispersion emulsions and Pickering emulsions can be obtained through reversing the charge of alumina particles by adjusting the pH. The results provide a new protocol for the design of surfactants for stabilization of smart oil-in-dispersion emulsions.     

Palladium(II)-allyl complexes containing chiral N-donor ferrocenyl ligands

A study of the reactivity of enantiopure ferrocenylimine (S_C)-[FcCHN-CH(Me)(Ph)] {Fc =  (η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-} (1a) with palladium(II)-allyl complexes [Pd(η³-1R¹,3R²-C₃H₃)(μ-Cl)]₂ {R¹ = H and R² = H (2), Ph (3) or R¹ = R² = Ph (4)} is reported. Treatment of 1a with 2 or 3 {in a molar ratio Pd(II):1a = 1} in CH₂Cl₂ at 298 K produced [Pd(η³-3R²-C₃H₄){FcCHN-CH(Me)(Ph)}Cl] {R² = H (5a) or Ph (6a)}. When the reaction was carried out under identical experimental conditions using complex 4 as starting material no evidence for the formation of [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(Ph)}Cl] (7a) was found. Additional studies on the reactivity of (S_C)-[FcCHN-CH(R³)(CH₂OH)] {R³ = Me (1b) or CHMe₂ (1c)} with complex 4 showed the importance of the bulk of the substituents on the palladium(II) allyl-complex (2-4) or on the ferrocenylimines (1) in this type of reaction. The crystal structure of 5a showed that: (a) the ferrocenylimine adopts an anti-(E) conformation and behaves as an N-donor ligand, (b) the chloride is in acis-arrangement to the nitrogen and (c) the allyl group binds to the palladium(II) in a η³-fashion. Solution NMR studies of 5a and 6a and [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(CH₂OH)}Cl] (7b) revealed the coexistence of several isomers in solution. The stoichiometric reaction between 6a and sodium diethyl 2-methylmalonate reveals that the formation of the achiral linear trans-(E) isomer of Ph-CHCH-CH₂Nu (8) was preferred over the branched derivative (9). A comparative study of the potential utility of ligand 1a, complex 5a and the amine (S_C)-H₂N-CH(Me)(Ph) (11) as catalysts in the allylic alkylation of (E)-3-phenyl-2-propenyl (cinnamyl) acetate with the nucleophile diethyl 2-methylmalonate (Nu⁻) is reported.     

Ferrocene derivatives supported on poly(N-vinylpyrrolidin-2-one) (PVP): Synthesis of new water-soluble electrochemically active probes for biomolecules

Carboxy-terminated polyvinylpyrrolidin-2-one (PVP) has been used as a new water-soluble and biocompatible polymeric support for a series of ferrocene labeled amino acid and peptide nucleic acid (PNA) monomer derivatives 4-7. The organometallic polymer-conjugates thus obtained are new and potentially useful as water-soluble electrochemically active probes for biomolecules. In view of such application, their electrochemical activity has been evaluated and has proved very high notwithstanding the complexity and bulkiness of the molecule, affording detection limits down to 10⁻⁸ M in the aqueous medium.     

Ca vs. Ba electrochemical detection by two disubstituted ferrocenyl chalcone chemosensors. Study of the ligand-metal interactions in CH3CN

We show here that the disubstituted ferrocenyl chalcones 1 and 2 are good electrochemical sensors for calcium and barium in CH₃CN. However, these two triflate salts are detected in a different way by both ligands. To clarify this point, a thorough and informative NMR study of the ligand-salt interactions is presented. The unusual shapes of the titration curves obtained depend on both the ligand and cation used. For example, they illustrate that ligand 1 mainly interacts with the metal by its CO functions, while ligand 2 also interacts by its azacrown groups. These curves also reflect complex equilibriums in solution involving several ligand-salt adducts detected by mass spectrometry. To evaluate the strength of these interactions, the association constants of all the species formed have been determined by fitting the NMR data. It is noteworthy that changing the diethylamino groups in molecule 1 by the azacrown residue enhances the selectivity for the calcium salt, as pointed out by the value of the association constant of the 2Ca²⁺ species. The synthesis of the protonated counterparts 3 and 4 was useful to clarify the electrochemical behaviour of 1 and 2. Although the two ligand-salt interactions present several common points, the whole results obtained allow us to propose an original explanation for the difference observed between the Ca²⁺ and Ba²⁺ electrochemical sensing.     

Synthesis and structural characterization of metallated bioconjugates: C-terminal labeling of amino acids with aminoferrocene

Aminoferrocene, H₂N-Fc, has been substituted to the C-terminus of six amino acids using the HBTU/HOBt coupling protocol. The synthesized bioconjugates Boc-Aaa-NH-Fc, Aaa = Gly (1), Leu (2), Phe (3), Val (4), Cys(Acm) (5), Tyr(^tBu) (6) (Acm = acetamidomethyl, ^tBu = tert-butyl), have been characterized by ¹H NMR, ¹³C NMR, EI-MS, EI-HRMS, UV and CD spectroscopies. In addition, a VT NMR study on 4 and the X-ray structure of 1 are presented.     

Two electroactive ferrocenyl chalcones as original optical chemosensors for Ca and Ba cations in CH3CN

The optical study of ferrocenyl ligands 1-2 is presented, and reveals several interesting points. Contrary to their monosubstituted counterparts, these ligands exhibit fluorescence properties in acetonitrile. They can detect calcium, and also barium, by four different techniques: NMR, electrochemistry, UV-Vis absorption spectroscopy and fluorimetry in the same solvent. Each ligand detects both salts in the same manner by UV-Vis absorption and by fluorimetry. The response depends on the nature of the N terminal groups of the ligand. In each case, the ligand-calcium interaction is complex and involves 3-5 species in equilibrium in solution. Their association constants have been determined by fitting the UV-Vis data. Remarkably, for 2 and the calcium salts, nearly the same set of association constants can be used to fit not only the UV-Vis data obtained with calcium triflate (in a restricted range of concentration) or with calcium perchlorate, but also the NMR data obtained with calcium triflate. Interestingly, these results strengthen the fact that, in this family of compounds, the azacrown derivatives are less sensitive to high calcium triflate concentrations than their simple N-alkyl homologues. It is noteworthy that the complex non-monotonous fluorescence behaviour of compounds 1 and 2 upon Ca²⁺ or Ba²⁺ addition is quite original for ferrocenyl chalcones. These ligands constitute scarce examples of multi-signalling fluorescent ferrocenyl chemosensors for Ca²⁺ and Ba²⁺ cations in CH₃CN.     

Products of hydrolysis of (ferrocenylmethyl)trimethylammonium iodide: Synthesis of hydroxymethylferrocene and bis(ferrocenylmethyl) ether

The attempted coupling of (ferrocenylmethyl)trimethylammonium iodide (1) with 1,4,7-(triformyl)-1,4,7,10-tetraazacyclododecane (2) in water led to the formation of the expected compound 1-(ferrocenemethyl)-4,7,10-(triformyl)-1,4,7,10-tetraazacyclododecane (3). In addition, hydrolysis of the ferrocenyl precursor 1 led to the formation of two other known compounds, hydroxymethylferrocene (4) and bis(ferrocenylmethyl) ether (5). An X-ray crystal structure determination of 4 revealed the presence of H-bonding between the hydroxyl groups of one molecule of 4 and the oxygen atom of an adjacent molecule resulting in a left-handed helical chain of molecules lying along the b-axis direction. The O?O distances are significantly shorter than those found in previously reported structures of hydroxymethylferrocene derivatives indicative of moderate strength H-bonding interactions. In the structure of 5, the orientation of the ferrocenyl groups are staggered relative to a vector comprising the two carbons of the C-O-C linker.