Magnetic and structural investigation of Mn(2+)-doped ZnSe semiconductor nanoparticles.

X-ray magnetic circular dichroism (XMCD) experiments on diluted magnetic semiconductor nanocrystals were carried out to study the local electronic structure and magnetic properties of Mn(2+) embedded in the lattice of ZnSe nanoparticles. It is shown that Mn(2+) is exclusively present in the bulk of ZnSe nanoparticles. Neither Mn-Mn coupling nor traces of oxidation to higher Mn oxidation states was observed. This result, which is consistent with EPR spectroscopic data, provides clear proof of the location of Mn(2+) in semiconductor nanoparticles. Further, it is shown that the magnetic ions are highly polarised inside the nanocrystals, where they reach about 50 % of the theoretical value of a pure d(5) state under identical conditions.     

Alloy formation processes at electrochemical intercalation of lithium into intermetallic compounds of magnesium with zinc

A comparative study of alloy formation processes that occur during the electrochemical intercalation of lithium from lithium chloride solutions in dimethylformamide into intermetallic compounds of magnesium with zinc (MgZn₂, Mg₂Zn₃) and the corresponding individual metals is studied by chronopotentiometric and voltammetric methods. Lithium-containing phases are formed in all samples studied; moreover, for MgZn₂ and Mg₂Zn₃ electrodes, the phases formed are preferentially in the Li-Zn system. The largest number of lithium-containing phases is formed in zinc. It is shown that the electrochemical behavior of intermetallic electrodes is associated with their nature, where a single alloy component plays the key role, namely, zinc for MgZn₂ and magnesium for Mg₂Zn₃. The cathodic intercalation of lithium into MgZn₂ is characterized by anomalously low polarizability as compared with the other electrodes. The lithium extraction coefficient K _ex ^Li increases from the first to the tenth cycle for all electrode studied. The highest K _ex ^Li are typical of Zn and the lowest are typical of Mg₂Zn₃.     

Synthesis and metal complexes of chiral c(2)-symmetric diamino-bisoxazoline ligands

A synthetic route to tetradentate chiral N(4) ligands has been developed with the aim to study the potential of corresponding iron and manganese complexes as catalysts for enantioselective epoxidation. These ligands, which contain two oxazoline rings and two trialkylamino groups as coordinating units, are readily prepared in enantiomerically pure form by the reaction of chiral 2-chloromethyloxazolines with achiral N,N'-dimethylethane-1,2-diamine or chiral (R,R)-N,N'-dimethylcyclohexane-1,2-diamine. The ligands derived from N,N'-dimethylethane-1,2-diamine reacted with anhydrous metal halides MnCl(2) and FeCl(2) in a stereoselective manner to give octahedral mononuclear complexes that have the general formula Delta-[(L)MCl(2)]. In contrast, the ligands derived from N,N'-dimethylcyclohexane-1,2-diamine formed complexes with different coordination modes depending on the diastereomer employed: in one case the metal ion was found to be pentacoordinate, in the other case a hexacoordinated complex was observed. The structure of a series of Fe and Mn complexes was determined by X-ray analysis. The coordination chemistry of these ligands was further studied by X-ray and NMR analyses of the diamagnetic isostructural complexes [(L)ZnCl(2)]. Analogous ionic complexes, which were prepared by removing chloride with silver trifluoromethanesulfonate or hexafluoroantimonate, were tested as catalysts for the epoxidation of olefins.     

非晶态合金Fe80P20局域结构和性质的量子化学研究

利用原子簇模型Fe_4P简化了非晶态合金Fe_(80)P_(20)的局域结构,设计了四方锥、三角双锥、四面体及平面五边形等十几种构型,对其二、四重态分别进行密度泛函(DFT)优化计算,经过频率验证,获得五种稳定构型。从所得优化构型的键长和键级,可以发现原子簇Fe4P较好地反映了非晶态合金Fe_(80)P_(20)的局域结构。考察了各构型间的过渡转化情况,发现二重态构型的稳定性要好于四重态。分析各构型的能量、成键及电子转移情况,发现与P原子成键的Fe原子个数对这些性质影响较为明显。与P原子成键的Fe原子个数越多,体系的能量就越低,越容易存在；P原子的得电子能力随着与其成键Fe原子个数增多而减少,甚至会将失去自身电子转移到金属原子上。同时通过3d轨道布居数,讨论了原子簇的空穴数及磁学性质。     

尖晶石型LiMn2O4薄膜电极的制备及电化学性质研究──电化学石英晶体微天平(EQCM)技术研究

石英晶体微天平(QCM)作为纳克级的质量传感器,可通过测定石英晶体振动频率的变化来测定石英晶体表面微小的质量变化.近年来,电化学石英晶体微天平(EQCM)技术已广泛应用于电化学研究领域[1].在锂嵌入型电极充放电过程中,锂离子在嵌基材料中嵌入脱出会引起电极质量的微小变化,因而利用EQCM技术研究Li+的嵌入脱出过程有其独到之处.     

高择优锌-镍合金电沉积的现场ECSTM研究

采用"二步包封"法制备了性能良好的电化学STM针尖.以此为基础采用ECSTM现场研究了工艺条件下HOPG上高择优锌-镍合金的电沉积过程.研究结果表明这种高择优沉积层以侧向生长方式生长,而表面上电化学活性差的晶面构成了晶体生长过程的保留面,从而进一步形成了与基底表面方向一致的高择优沉积层,X射线研究表明这一择优面为(100)晶面.     

镧镍铜钴储氢合金的制备与性质

以LaNi₅为代表的镧系储氢合金有优良的吸放氢性能,抗中毒能力强,因而受到广泛重视^[1]. 目前已开发出许多二元及多元镧系合金,并研究了部分合金的表面性质^[1～4],但结果并不一致. 本文制备了四元合金LaNi₄Cu_0.5Co_0.5,通过X 射线光电子能谱(XPS)、扫描电镜(SEM)和吸氢测试等方法研究该合金的性质。     

纳米Ni－B非晶态合金的催化性质研究

纳米Ｎｉ－Ｂ非晶态合金的催化性质研究杨军,崔黎丽,邓景发（复旦大学化学系,第二军医大学药学院,上海,２００４３３）关键词纳米材料,非晶态合金,催化性质纳米非晶材料融合了纳米晶与非晶材料的特性,既有很高的表面原子比,又呈高度几何无序状态。与普通非晶材料...