一维链状锰(Ⅱ)三氮唑配合物的合成，结构与磁性质(英)

A novel one-dimensional chain manganese(Ⅱ) compound [Mn(trz)₂Cl][phthH], (trz=1,2,4-triazole, phthH=hydrogen phthalate), 1, was synthesized and structurally characterized. It crystallizes in monoclinic system, space group P2 /c with a=1.381 1(11) nm, b=0.815 5(7) nm, c=0.735 4(6) nm, β=94.667(15)°, V=0.825 5(12) nm³. It consists of one dimensional cationic manganese(Ⅱ) chain and uncoordinated hydrogen phthalate anions. The manganese(Ⅱ) ions are bridged with two 1,2,4-traizoles and one chloride anion along the cationic chain, in which the weak antiferromagnetic exchange occurs between manganese(Ⅱ) atoms. CCDC: 267461.     

SYNTHESIS AND CATALYTIC PROPERTY OF POLYSTYRENE SUPPORTED GLUTAMIC ACID SCHIFF BASE COMPLEX OF Mn（ Ⅱ ） IN AEROBIC OXIDATION OF CYCLOHEXENE

The polystyrene supported glutamic acid Schiff base complex of Mn （ Ⅱ ） （PS-Sal-Glue-Mn） was prepared with chloromethylated styrene polymer beads, 2,4-dihydroxybenzaldehyde, L-glutamic acid and manganese （ Ⅱ ） acetate tetrahyrate. The polymeric ligand and the complex were characterized by FT-IR, small area X-ray photoelectron spectroscopy （XPS） and 1CP-AES. In the presence of the manganese complex, cyclohexene （1） was effectively oxidized by molecular oxygen without reductant. The major products of the reaction were 2-cyclohexen-l-ol （2）, 2-cyclohexen-l-one （3） and 2-cyclohexen-1- hydroperoxide （4）, which was different with typical oxidation of cyclohexene. The influence of reaction temperature and additive for oxidation had been studied. The selectivity of 2-cyclohexen-1-hydroperoxide varied with reaction time and different additives. The mechanism of cyclohexene oxidation had also been discussed.     

代铬刷镀层的耐腐蚀机理的考察

对新型的代铬刷镀层Ni-Fe-W-P-S进行了耐腐蚀性能机理的分析研究。用扫描电镜(SEM)、透射电镜(TEM)、扫描隧道显微镜(STM)、X射线衍射及电子能谱(XPS)等的分析表明，基体组织为非品结构是代铬刷镀层优异耐腐蚀性的主要原因.     

钇对IMI829钛合金及Ti—14Al—21Nb合金显微组织和性能的影响

采用光学显微镜、扫描电和力学性能测试设备，研究了在ＩＭＩ８２９和Ｔｉ－１４Ａｌ－２１Ｎｂ合金中添加Ｙ，对合金显微组织遥影响。结果表明，在ＩＭＩ８２９和Ｔｉ－１４Ａｌ－２１Ｎｂ合金中添加Ｙ，可以细化这两种合金的组织和晶粒，使ＩＭＩ８２９－０．２Ｙ合金获得良好的室温力学性能和５５０℃蠕变性能，ｗｇｋｑＴｉ－１４Ａｌ－２１Ｎｂ－０．１Ｙ合金的高温力学性能得到改善。     

32Cr2MoVA合金结构钢标准物质的研制

本标准物质系合金钢。主要成份有碳、硅、锰、磷、硫、铬、镍、钼、钒,同时还含有锡、铅、砷、锑、铋等微量元素,每种元素成份都具有良好的线性关系。它可作为量值传递和仲裁分析的依据,同时也可用于校验分析仪器与分析方法的正确性和可靠性。     

Y2O3薄膜处理对3Cr25Ni7N合金的抗高温氧化性能的影响

采用电沉积-热解法在3Cr25Ni7N合金表面制备了Y2O3薄膜,并研究了薄膜处理对合金在1000℃空气中的抗高温氧化性能的影响。氧化动力学曲线、SEM及XRD分析结果表明,Y2O3薄膜处理使合金表面氧化膜以尖晶石结构为主,氧化膜致密,有效地抑制了Cr2O3的挥发反应,且氧化膜与基体的附着性好,因此合金在高温下的抗氧化性能得到提高,这与氧化钇薄膜在较低温度下抗高温氧化性能提高的机制是不同的。在不同温度下,Y2O3薄膜处理均可以有效提高合金的抗高温氧化性能。     

SYNTHESIS AND CATALYTIC PROPERTY OF POLYSTYRENE SUPPORTED PHENYLALANINE SCHIFF BASE COMPLEX OF Mn（Ⅱ） IN AEROBIC OXIDATION OF CYCLOHEXENE

The polystyrene supported phenylalanine Schiff base complex of Mn(Ⅱ)(PS-Sal-Phe-Mn)was prepared with chloromethylated styrene polymer beads, 2,4-dihydroxybenzaldehyde,L-phenylalanine and manganese(Ⅱ)acetate tetrahyrate., The polymeric ligand and the complex were characterized by FT-IR,, small area X-ray photoelectron spectroscopy(XPS), and ICP-AES. In the presence of the manganese complex, cyclohexene(1)was effectively oxidized by molecular oxygen without reductant. The major products of the reaction were 2-cyclohexen-1-ol(2),2-cyclohexen-1-one(3)and 2-cyclohexen-1- hydroperoxide(4), which was different with typical oxidation of cyclohexene. The influence of reaction temperature and additive for oxidation had been studied. The selectivity of 2-cyclohexen-l-hydroperoxide varied with reaction time and different additives. The mechanism of cyclohexene oxidation had also been discussed.     

Use of a Carbon Paste Electrode Modified with Spinel‐Type Manganese Oxide as a Potentiometric Sensor for Lithium Ions in Flow Injection Analysis

A potentiometric sensor constructed from a mixture of 25% (m/m) spinel‐type manganese oxide (lambda‐MnO₂), 50% (m/m) graphite powder and 25% (m/m) mineral oil is used for the determination of lithium ions in a flow injection analysis system. Experimental parameters, such as pH of the carrier solution, flow rate, injection sample volume, and selectivity for Li⁺ against other alkali and alkaline‐earth ions and the response time of this sensor were investigated. The sensor response to lithium ions was linear in the concentration range 8.6×10^?5–1.0×10^?2 mol L^?1 with a slope 78.9±0.3 mV dec^?1 over a wide pH range 7–10 (Tris buffer), without interference of other alkali and alkaline‐earth metals. For a flow rate of 5.0 mL min^?1 and a injection sample volume of 408.6 μL, the relative standard deviation for repeated injections of a 5.0×10^?4 mol L^?1 lithium ions was 0.3%.     

Ti-47Al-1.2Ce合金显微组织及稀土相

ＴｉＡ1金属间化合物以其低密度 ,高比强度和比弹性模量 ,良好的抗蠕变及抗氧化能力等特点 ,已成为航天、航空、能源及汽车工业极具竞争力的高温结构材料。虽然ＴｉＡｌ基合金有众多优点 ,但仍存在室温塑性较低、成形性差、性能不平衡等问题 ,还需要深入研究ＴｉＡｌ基合金的合金化及制备工艺等方面技术 ,以此来控制并改善合金的显微组织 ,提高ＴｉＡｌ基合金的综合性能[1～ 4 ] 。合金化是改善ＴｉＡｌ基合金显微组织和性能的重要途径之一 ,通常添加的合金元素有Ｖ ,Ｃｒ ,Ｎｂ ,Ｗ ,Ｍｏ ,Ｓｉ ,Ｂ等[5～ 7] 。稀土元素一般被用来细化材料…     

Oxidation of 1-methylcyclobutanol by Pb(IV) and Mn(III) compounds

The main product of the reaction of 1-methylcyclobutanol with Pb(OAc)₄ in benzene is 1-phenyl-4-pentanone; the use of Mn(OAc)₃ in acetic acid gives a mixture of 2,9-decanedione and methyl propyl ketone; 1-(chloro-, bromo-, thiocyano-, or cyano)-4-pentanone is formed in the presence of the systems Pb(OAc)₄-metal halide or Mn(OAc)₃-metal halide.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2760–2763, December, 1992.