纳米TiO2-SnO2介孔材料的制备及其对含氰废水的光催化降解性能

以TiCl4和SnCl4为原料,采用直接水解常压液相反应合成出了纳米TiO2-SnO2复合介孔材料.利用XRD和TEM及漫反射谱等对样品进行了表征,并研究了纳米TiO2-SnO2复合介孔材料对含氰废水的光催化降解性能.结果表明,纳米TiO2与SnO2复合后,导致材料的光谱响应拓宽;此种催化剂在日光灯下比在紫外灯下对废水中CN-的降解效果要好.     

应用大孔吸附树脂从农药废水中回收毕克草

毕克草为一种新型除草剂,通常情况下很难被降解,本文利用物理吸附原理通过自行制备的大孔吸附树脂从农药水中对其进行了回收,回收效果良好,同时也达到了废水处理的目的。优化的最佳实验条件:室温下,pH=1.0以及流速为5BV/h时,对COD为15000mg/L的毕克草废水吸附处理后,其出水可达《污水综合排放标准》(GB89—1996)中的一级排放标准;洗脱再生时,室温下,用95%的乙醇洗脱,流速为2BV/h,(即2倍树脂床体积/h)回收率可达98.4%,纯度达93.7%,总流程一次可处理该废水240mL。     

城市污水处理过程中有机污染物三维荧光特性的变化规律

采用三维荧光光谱法研究了城市污水处理过程中溶解性有机物的三维荧光特性变化规律。研究结果表明,生活污水中荧光类溶解性有机物主要以类蛋白有机物、UV腐殖质和可见腐殖质为主;污水生物处理前后特征荧光峰中心位置和强度均发生明显的改变,表明污水中有机物的相对组成和含量随生物处理过程而变化。三维特征荧光参数可以反映污水处理过程中污染物的种类、性质和含量变化等丰富信息。其测定迅速简便、灵敏度高,可用于污水处理效果的定性分析、定量评价,易于实现污水处理过程的实时在线监测,指导污水处理工艺的设计、运行、管理和控制。     

水淬渣-累托石颗粒吸附材料的制备及应用

研究了水淬渣-累托石颗粒吸附材料制备工艺条件、再生方法及其去除铜冶炼工业废水中重金属的条件.试验结果表明,累托石与水淬渣的比例为1∶1,另加入10%的添加剂(IS)和50%的水,焙烧温度为400℃时,制成的颗粒吸附材料体积密度为1.06kg/m3,显气孔率为62.29%,吸水率为58.82%,抗压强度为2.22Mpa,吸附效果好,散失率较低.在未调节铜冶炼工业废水pH值的条件下,颗粒吸附材料用量为0.05g/cm3,反应时间为40min,吸附温度为25℃(常温)时,Cu2 、Pb2 、Zn2 、Cd2 、Ni2 的去除率分别为98.2%、96.3%、78.6%、86.2%、64.2%,处理后的水符合国家污水综合排放标准(GB8978-1996)一级标准.颗粒吸附材料对Zn2 、Cu2 有很好的选择性.吸附饱和的颗粒吸附材料用1mol/L氯化钠溶液再生效果好.该颗粒吸附材料具有分离容易、可重复使用、处理效果好、应用前景广阔的优点.     

稀土掺杂PbO2电极的制备及催化性能研究

以SnCl4.5H2O,Sb2O3,La（NO3）3（或Nd（NO3））为前驱体（摩尔比分别为Sn∶Sb∶La（Nd）=100∶6∶（0.5,1,2）,制备稀土（La,Nd）掺杂Sn,Sb溶胶,以钛电极为基体,用溶胶-凝胶法制备稀土（La,Nd）掺杂SnO2中间层,热处理温度为450和500℃,热处理时间共5 h;采用电沉积法制备PbO2表面层,得到改性PbO2阳极,优化了制备改性PbO2电极的稀土掺杂量。以含油污水为目标有机物,借助于CODCr去除情况分析电极的电催化氧化能力;分析了电极结构与电催化特性之间的关系。采用SEM和XRD分析了制备电极的表面形貌、晶体结构并通过电化学工作站对其析氧电位进行了表征分析。结果表明,中间层掺杂La元素的电极,掺杂比为Sn∶Sb∶La=100∶6∶1时电极性能最好;而中间层掺杂Nd元素,掺杂比为Sn∶Sb∶Nd=100∶6∶2时电极的性能最好,此比例时电极对目标有机物CODCr去除率分别为91.90%和90.93%。     

Bi2O3-WO3光催化臭氧氧化降解糖蜜酒精废水的研究

采用固相合成法制备了Bi2O3-WO3光催化剂,研究了Bi2O3-WO3光催化与臭氧氧化协同降解糖蜜酒精废水的多相催化降解过程,并采用X射线衍射光谱(XRD)、紫外漫反射光谱(DRS)、热重-差热扫描(TG-DSC)等手段对Bi2O3-WO3催化剂进行了表征.研究发现:Bi2O3-WO3是一性能良好的光催化剂,臭氧强化了Bi2O3-WO3光催化氧化过程,反应2 h后,糖蜜酒精废水的脱色率可达90.2%.Bi2O3-WO3光催化剂的禁带宽度为2.92 eV,其中γ-Bi2WO6和Bi2W2O9是其活性中心.焙烧温度对Bi2O3-WO3光催化剂的活性有较大的影响,其中1 073 K为适宜的焙烧温度.     

Removal of pharmaceutical residues in a pilot wastewater treatment plant

Concern is growing over the contamination of the environment with pharmaceutical residues, among which non-steroidal anti-inflammatory drugs (NSAIDs) are one of the most abundant groups. Their widespread appearance in the aquatic environment is because of their high consumption and their incomplete removal during wastewater treatment. Because effective operation of wastewater-treatment plants is important for minimising the release of xenobiotic compounds, for example pharmaceutical products, into the aquatic environment, our study focuses on removal of commonly used NSAIDs (ibuprofen, naproxen, ketoprofen, diclofenac) and clofibric acid in a specially designed small-scale pilot wastewater treatment plant (PWWTP). This study shows that, except for diclofenac, steady-rate removal of NSAIDs over a two-year monitoring period has been achieved. Elimination of the compounds in the PWWTP was ≥87% for ibuprofen, naproxen and ketoprofen but only 49–59% for diclofenac. We also studied clofibric acid. Results after one month of operation revealed 30% elimination with no sign of adaptation by the biomass. Also described are degradation products of diclofenac, which we were able to identify because of the similarity of their mass spectra with those in the NIST library and by comparing the retention times of different compounds. Although the structures of these compounds were confirmed with a high probability (99%), we still need to compare the fragmentation of authentic compounds with degradation products formed under our experimental conditions. Degradation products of ibuprofen, naproxen, ketoprofen, and clofibric acid were found but these must be identified by use of high-resolution mass spectrometry and analysis of authentic compounds.     

Influence of temperature on performance of an anaerobic sequencing biofilm batch reactor with circulation applied to treatment of low-strength wastewater

The effect of temperature on the performance of an anaerobic sequencing biofilm batch reactor (ASBBR) with liquid-phase recirculation was assessed. Assays were performed using a recirculation velocity of 0.20 cm/s, 8-h cycles, and an average treated synthetic wastewater volume of 2 L/cycle with a concentration of 500 mg of Chemical Oxygen Demand (COD)/L. Operation temperatures were 15, 20, 25, 30, and 35°C. At 25, 30, and 35°C, organic matter removal efficiencies for filtered samples ranged from 81 to 83%. At lower temperatures, namely 15 and 20°C, removal efficiency decreased significantly to 61 and 65%, respectively. A first-order model could be fitted to the experimental concentration profile values. The first-order kinetic parameter value of this model varied from 0.46 to 0.81 h¹ considering the lowest and highest temperature studied. Moreover, analysis of the removal profile values allowed fitting of an Arrhenius-type equation with an activation energy of 5715 cal/mol.     

水中铬污染治理的研究进展

综述了水中铬污染治理的研究进展,包括物理法、物理化学法、化学法、电化学法和生物处理法,并分别评述了各种处理方法的优缺点,提出了未来含铬废水治理的发展方向。     

活性炭纤维电极电解法处理墨绿B染料废水

将铁丝缠绕在活性炭纤维(简称ACF)上制成电极,并在阴极鼓入空气,用电解生成的Fenton试剂处理墨绿B染料模拟废水.研究了电压、pH值、温度、空气流量、支持电解质的浓度等因素对染料脱色率的影响.结果表明,pH值越低,温度越高,处理效果越好,气流量的改变对于处理效果影响不大.室温时处理浓度为50mg·L-1的活性染料墨绿B,在实验电压为11V,中性条件下,无水硫酸钠的浓度为20g·L-1,通入空气流量为60L·min-1时,处理60min,色度去除率达到95%左右.55℃时,电解30min色度去除率就达到96%,60min时达到100%.