Annealing effects on the magnetization of Co–Ni–B amorphous nanoparticles

Chemically prepared (Co_xNi_1−x)_1−yB_y (x=0.5, 0.75, 1; y≈0.4) amorphous fine particles were characterized by X-ray diffraction, DTA and TGA, and in situ magnetic measurement as a function of annealing temperature in an inert atmosphere. Magnetic measurement performed in as-prepared and 150°C annealed samples shows an increase of the saturation magnetization and magnetic moment after thermal treatment. Room temperature magnetization increases by factors of 3.5, 1.8, and 1.5, for x=0.5, 0.75, and 1, respectively. These measurements may indicate a local re-ordering of the amorphous phase at temperatures much lower than the full crystallization temperature.     

Thermodynamic and surface properties of Sb-Sn and In-Sn liquid alloys

The thermodynamic properties of Sb-Sn and In-Sn liquid alloys have been studied using the quasi-chemical model for compound forming binary alloys and that for simple regular alloys. The concentration fluctuation S _cc(0) and the Warren-Cowley short-range order parameter (α ₁) were determined for the whole concentration range at a temperature of 770 K. The surface tensions of these liquid alloys were determined for the whole concentration range by using energetics determined from thermodynamic calculations. In all calculations, In-Sn manifested properties very close to alloys of ideal mixing, while Sb-Sn showed properties that are asymmetric about equiatomic composition. Our results suggest that a weak complex of the form SbSn₂ could be present in the Sb-Sn alloy at a temperature of about 770 K.     

Mössbauer, X-ray diffraction and magnetization studies of Fe–Mn–Al–Nb alloys prepared by high energy ball milling

Fe₆₀Mn₁₀Al₂₀Nb₁₀, (Fe₆₀Mn₁₀Al₃₀)₉₅Nb₅ and (Fe₆₀Mn₁₀Al₃₀)₉₀Nb₁₀ ball milled powdered alloys were investigated using X-ray diffraction, Mössbauer spectrometry, thermomagnetic (TGM) and magnetization measurements. We studied the influence of Nb content and of different milling times on the structural and magnetic properties. Two main features can be concluded: (1) the FeAlMn induces a BCC phase whatever the Nb content is, and (2) as both increasing Nb content and milling time give rise to an highly disordered state in conjunction with a decrease of the ferromagnetic behavior.     

铁(Ⅲ)-邻菲罗啉溶液体系的光化学还原 Ⅱ.气相色谱法研究光化反应机理

关于Fe(Ⅲ)-邻菲罗啉(phen)溶液的光化学还原现象的记载可追溯到十九世纪末。     

Fe(110)面上CO化学吸附状态的吸附历史依赖关系

Fe(110)面上直接在室温时吸附的CO同先在170 K吸附然后升温到室温的CO吸附有所不同. 前者有解离而后者无解离; 另外, 前者的饱和吸附量比后者低. 这可以用前者发生了解离来解释. 根据以上结果, 提出了以下的设想, Fe(110)面上的CO解离除了需要足够的热能而外, 还需要在表面的吸附位上有邻近的其它未被覆盖Fe原子的存在, 即需要一定的表面结构.     

Influence of surface treatments in the initial stages of anodizing Al–Ag alloys in neutral electrolytes

Using voltage-time responses and cyclic voltammetry, the initial stages of anodizing of Al–2.1 at.% Ag and Al–4 at.% Ag alloys are shown to depend upon the heat treatment of the alloys and the pre-treatment of the alloy surfaces. Chemical polishing of solution-treated alloys leads to relatively uniform anodic oxidation on a relatively smooth alloy surface, in the absence of significant effects of coarse, silver-rich intermetallics. In contrast, losses of current to oxygen generation arise for the roughened alloy surface from mechanical polishing. With ageing, secondary reactions at the relatively silver-rich intermetallics are more prevalent, although the effects on the voltage-time response depend upon the balance between processes occurring on the matrix and intermetallic regions, including film growth, oxygen generation within the anodic film, film damage due to release of oxygen, dissolution of silver species and re-growth of damaged film.     

A New Family of Binary Layered Compounds of Platinum with Alkali Metals (A = K,Rb, Cs)

By reacting platinum with alkali metals (A = K, Rb, Cs) a new family of binary alkali metal platinides has been synthesized and characterized by chemical analysis, X‐ray powder diffraction, thermal analysis (DTA and DSC), and magnetic measurements. All three compounds exhibit similar XRD‐patterns with strong reflections that can be indexed on the basis of a rhombohedral crystal system (K_xPt: a = 2.6462(1), c = 17.123(1); Rb_xPt: a = 2.6415(1) Å, c = 17.871(1) Å; Cs_xPt: a = 2.6505(1) Å, c = 18.536(1) Å; x < ½. The a lattice constant is independent on the alkali metal used and of value close to the Pt–Pt distance in NaPt₂ (2.645Å). The c parameter increases monotonically with the growing atomic radius of the alkali metal. The average structure of the alloys consists of cubic close packed layers of platinum atoms with layers of disordered alkali metals in between. For all compounds besides the strong reflections small satellites are observed which cannot be indexed together with the rhombohedral peaks in any rational 3‐dimensional lattice. However, these satellites can be indexed as incommensurate modulations within the ab plane (found propagation vectors k = (0.1011, 0.2506, 0) for Cs_xPt, and k = (0.0168, 0.2785, 0) for Rb_xPt).     

C(2×2)S/Fe(001)吸附体系的SCF-Xa-MS研究

采用SCF-X_α-MS方法, 对于C(2×2)S/Fe(001)吸附体系, 选择Fe_5S和Fe_9S两种原子簇模型, 研究了该吸附体系的电子结构、吸附成键特征及其相互作用图象。结果表明, S吸附于Fe(001)单晶表面具有较强的定域性质, S原子与底物Fe原子之间的吸附相互作用主要表现为S(3p)-Fe(4s,3d)之间的轨道相互作用。通过对表面吸附键长的优化, 其结果与X.S.Zhang等的ARPEFS的实验结果一致。     

Spectrophotometry Determination of Cobalt after Extraction of its Ternary Complex with 3-(4-Phenyl-2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine and Tetraphenylborate into Molten Naphthalene

The reaction of 3-(4-phenyl-2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PPDT) and tetraphenylborate (TPB) with cobalt (II) has been studied to determine the optimum conditions for the extraction and quantitative spectrophotometry determination of this metal. The ternary complex is extracted into molten naphthalene at pH 3.6–7.4. The solid naphthalene containing the cobalt associated complex is separated by filtration and dissolved in acetonitrile. Beer's law is obeyed in the concentration range 8–140 μg cobalt in 10 ml of acetonitrile solution. The molar absorptivity and sensitivity are 4.2×10³ l·mol^?1·cm^?1 and 0.01408 μg/cm², respectively. The other factors such as pH, amounts of reagents and naphthalene, shaking and standing times, and the effect of diverse ions are studied. The method has been applied to the determination of cobalt in iron steel alloys.