Characterization of surface deformation around Vickers indentations in InGaAsP epilayers on InP substrate

The deformation surrounding Vickers indentations on InGaAsP/InP epilayers have been studied in detail. The surface topography was characterized by using atomic force microscopy (AFM). The material pile-up and sink-in regions around the indentation impression was observed for the quaternary InGaAsP/InP epilayers. The sectional analysis mode of the AFM shows the depth profile at the indented region. Microindentation studies were carried out for different atomic fraction of the quaternary InGaAsP/InP compound semiconductor alloys. The microhardness values of InGaAsP/InP epilayers were found to be in the range of 5.08 and 5.73 GPa. These results show that the hardness value of the quaternary alloy drastically increases as the composition of As was increased by 0.01 atomic fraction and when the phosphorous concentration decreases from 0.4 to 0.38. The reason may be that the increase in As concentration hardens the lattice when phosphorous concentration was less and hardness decreases when phosphorous was increased.     

La5Al3Ni2 – an Intermetallic Phase Observed upon Crystallization of La50Al25Ni25 Metallic Glass

The yet unknown intermetallic phase La₅Al₃Ni₂ was obtained by partially crystallizing amorphous La₅₀Al₂₅Ni₂₅ at 550 K (further heating above 600 K leads to irreversible disappearance of this phase), and its crystal structure was determined from X‐ray powder diffraction data. The crystal structure of the La₅Al₃Ni₂ phase constitutes a new structure type (Cmcm, a = 14.231Å, b = 6.914Å, c = 10.460Å, oC40) and is built from [Al₃Ni₂] chains surrounded by La atoms. In the ternary system La‐Al‐Ni La₅Al₃Ni₂ is located on the section La₅₀Al_50−nNi_n (0 ≤ n ≤ 50) with the binary compounds LaAl and LaNi as end members. Strikingly, also the crystal structures of the end members can be conceived as chain structures with Al and Ni chains surrounded by La, respectively.     

Mössbauer and X-ray diffraction characterization of Fe60Al40 coatings prepared by thermal spraying

Microstructured (atomized) and nanostructured (milled) Fe₆₀Al₄₀ powders together with their corresponding coatings synthesized by High Velocity Oxy-fuel (HVOF) or Atmospheric Plasma Spray (APS) thermal spraying techniques have been characterized by Mössbauer Spectroscopy (MS) and X-ray Diffraction (XRD). The evolution of the microstructure and the atomic ordering degree in the powders and coatings are discussed at the light of the various processing conditions. The operational correlation between the parameters of the duplex morphology of coatings and the processing parameters is discussed.     

Magnetic behavior of the bond random mixed compound FE(BR x I1−x )2(x = 0.9) with Mössbauer spectroscopy

The bond random mixed compound Fe(Br_0.9I_0.1)₂ has been studied by magnetization and Mössbauer measurements. Although the zero-field cooled and field-cooled magnetization variations are not like a typical spin glass one, the Mössbauer spectrum below Néel temperature shows a hyperfine field distribution. It implies that the 10% FeI₂ mixed in FeBr₂ can be induced by the bond random effect which causes the sample to exhibit a spin glass-like behavior.     

Energy of formation for and liquid binary alloys

We have investigated the free energy of formation for Ag_xIn_1-x and Ag_xSn_1-x liquid binary alloys at temperatures 1173 and 1250 K, respectively. A microscopic theory based on the first order perturbation has been applied. The interionic interaction and a reference liquid are the fundamental components of the theory. The interionic interaction is described by a local pseudopotential. A liquid of hard spheres (HS) of two different effective diametres and charges is used to describe the reference system. The results of the calculations for energy of formation agree very well with the available experimental data. Our calculations also reveal that a simple perturbative approach along with appropriate effective pair potentials can produce nearly quantitative results for the concerned alloys.     

Mossbauer investigations of corrosion environment influence on Fe valence states in oxide films of zirconium alloys

Mössbauer investigations about iron atom redistribution in oxide films of zirconium alloys subjected to corrosion at 500°C in pure oxygen and water pair have been analysed. The alloys were also subjected to autoclave conditions at a pressure of 10.0 MPa and autoclave conditions at 350°C and at a pressure of 16.8 MPa, using distilled water and water with additives of lithium and fluorine. It is shown that, depending on the corrosion environment, various compounds of iron, such as α-Fe₂O₃, Fe₃O₄, and FeO, as solid solutions of iron in ZrO₂ are formed in oxide films.     

Fe/Si多层膜的层间耦合与界面扩散

对以本征Si及重掺杂ｐ型和ｎ型Si作为中间层的Fe/Si多层膜的层间耦合进行研究，并通过退火，增大Fe，Si之间的扩散，分析界面扩散对层间耦合的影响. 实验结果表明，层状结构良好的制备态的多层膜，Fe，Si之间也存在一定程度的扩散，它是影响层间耦合的 主要因素，远远超过了半导体意义上的重掺杂，使不同种类的Si作为中间层的层间耦合基本 一致.进一步还发现，在一定范围内增大Fe，Si之间的扩散，即使多层膜的层状结构已经有了相当的退化，Fe/Si多层膜的反铁磁耦合强度基本保持不变. 关键词： Fe/Si多层膜 层间耦合 界面扩散     

ICP-AES测定钛基复合材料中镍、钕和铁的研究

采用ICP－AES法对钛基复合材料中的合金元素镍、钕、铁的测定进行了研究，着重进行了基体元素及待测元素镍、钕、铁之间干扰试验及各元素在测定浓度范围内的线性相关性试验，进行了酸度试验，测定了钛基复合材料中3种元素的含量，得到了较好的精密度和准确度。方法简便、可靠，获得满意的分析结果。     

ICP-AES同时测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴

采用ICP－AES法测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴元素含量，并对样品的溶解酸和酸用量、元素分析线的选择以及共存元素间的干扰进行了研究。该法简便、快速，精密度和准确度较好。     

Comparison of the Kerr effect and X-ray pole figure methods for determining crystallographic texture in PrFeB magnets

In this study, magnetic domains in Pr₁₆Fe₇₆B₈ sintered magnets have been observed by Kerr effect and a histogram of the angular distribution of domain orientations has been used to determine the magnetic texture (cos Φ). The degree of easy-axis alignment of Pr₂Fe₁₄B matrix grains in these magnets has been also determined by X-ray pole figure analysis using the (0 0 4) reflection. The (0 0 4) pole figure measurements were carried out by the Schultz's reflection method. The (0 0 4) normalized intensity data has been fitted for a Gaussian distribution and the degree of crystal alignment, cos Θ, has been calculated using the Stoner–Wohlfarth model. Comparison of these methods has been carried out. It has been shown that in magnets with medium and high degrees of crystallographic alignment, the pole figure values are higher than that obtained by the Kerr effect method. Conversely, in magnets with low degrees of alignment, cos Θ is lower than cos Φ.