Fe3+-TiO2/SiO2光催化降解罗丹明B的研究

以硅胶为载体,采用溶胶-凝胶法制备了不同掺杂量的Fe3+-TiO2/SiO2光催化剂,并采用SEM,Raman和DRS等手段对其进行了分析和表征.以氙灯为光源,通过对可溶性染料罗丹明B的降解反应,考察了Fe3+-TiO2/SiO2催化剂的光催化活性,探讨了光催化反应中溶液pH值和起始浓度对催化反应的影响.     

延边地区65～108岁健康老人头发中锌、铜、铁、锰、镁的含量

用原子吸收光谱法测定延边地区317名65～108岁老人头发中锌、铜、铁、锰、镁含量，观察不同民族、性别、年龄老人这些元素的差异。结果表明：1.朝鲜旗发锌低于汉族，满族发铜低于汉族、朝鲜族，汉族发镁高于朝鲜族、满族，发铁、发锰在汉、朝、满民族之间无区别。2．汉族、朝鲜族男发锌高于女性，汉族女性发铜高于男性，发铁、发锰、发镁在性别之间无区别。3、90岁组朝鲜族发锰、发镁低于65岁、76岁组，朝鲜族发锌、发铜、发铁在65～108岁之间无统计学意义。     

Effect of ionic interactions on the oxidation of Fe(II) with H2O2 in aqueous solutions

The oxidation of Fe(II) with H₂O₂ has been measured in NaCl and NaClO₄ solutions as a function of pH, temperature T (K) and ionic strength (M, mol-L^–1). The rate constants, k (M^–1-sec^–1), d[Fe(II)]/DT=-k[Fe(II)][₂O₂]at pH=6.5 have been fitted to equations of the formlog k = log k₀+ AI ^1/2+BI+CI ^1/2/T Where log k₀=15.53-3425/T in water; A=–2.3, –1.35; B=0.334, 0.180; and C=391, 235, respectively, for NaCl (=0.09) and NaClO₄ ( =0.08). Measurements made in NaCl solutions with added anions yield rates in the order B(OH) ₄ ^– >HCO ₃ ^– >ClO ₄ ^– >Cl^–>NO ₃ ^– >SO ₄ ^2– and are attributed to the relative strength of the interactions of Fe²⁺ or FeOH⁺ with these anions. The FeB(OH) ₄ ⁺ species is more reactive while the FeCO ₃ ⁰ , FeCl⁺, FeNO ₃ ⁺ and FeSO ₄ ⁰ species are less reactive than the FeOH⁺ ion pair. The general trend is similar to our earlier studies of the oxidation of Fe(II) with O₂ except for B(OH) ₄ ^– . The effect of pH on the logk was found to be a quadratic function of the concentration of H⁺ or OH^– from pH=4 to 8. These results have been attributed to the different rate constants for Fe²⁺ (k₀) and FeOH⁺ (k₁) which are related to the measured k by, k=k_0Fe + k_1FeOH, where _i is the molar fraction of species i. The rates increase due to the greater reactivity of FeOH⁺ compared to Fe²⁺. k₀ is independent of composition and ionic strength but k₁ is a function of ionic strength and composition due to the interactions of FeOH⁺ with various anions.     

Tunable picosecond pulse generation from the passively mode-locked coumarin 6 dye laser

Using the saturable absorber 2-(p-Dimethylaminostyryl)-benzothiazolylethyl iodide, coumarin 6 has been passively mode-locked for the first time to give fully modulated trains of pulses of 4 ps duration and with peak powers of 3 MW tunable over the spectral range 526–547 nm.     

Simultaneous determination of Fe(II) and Fe(III) by kinetic spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) for simultaneous determination of Fe(II) and Fe(III) is described. The method is based on the difference in the rate of complex formation of iron in two different oxidation states with Gallic acid (GA) at pH 5. Fe(II) and Fe(III) can be determined in the range of 0.02–4.50 μg ml⁻¹ and 0.05–5.00 μg ml⁻¹, respectively, with satisfactory accuracy and precision in the presence of other metal ions, which rapidly form complexes with GA under working conditions. The proposed method was successfully applied for simultaneous determination of Fe(II) and Fe(III) in several environmental and synthetic samples with different concentration ratios of Fe(II) and Fe(III).     

Combined investigation of experimental characterization and theoretic calculation on the structure of dextran-Fe3O4 clusters

Dextran-Fe₃O₄ hybrid clusters were fabricated by coprecipitating ferric and ferrous ions in the presence of dextran, and after characterization of these clusters combined with calculation based on classical nucleation theory, a structure model of these hybrid clusters was proposed. The hybrid cluster was believed including small Fe₃O₄ nanoparticles and dextran which acted as both nucleating agent and stabilizer, so that exist in both the inside of magnetite nanoparticles and the periphery of the hybrid clusters. Besides, the effects of W_CD (weight_{iron cation}:weight_dextran) and molecular weight of dextran on the size, morphology and magnetic property of clusters were also investigated in this paper. It was found that the variation of W_CD and molecular weight of dextran have great effect on the size of the hybrid clusters, but have almost no effect on the size of the Fe₃O₄ nanoparticles. The characterization of magnetic property demonstrated that the Fe₃O₄ nanoparticles are of a single domain and the saturation magnetization was affected by the size of dextran-Fe₃O₄ hybrid clusters.     

Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts

Fe-ZrO₂ and Cu-ZrO₂ xerogels were prepared by a sol-gel method. The effect of the hydrolysis catalyst during the gelation step, namely H₂SO₄ or NH₄OH, on the properties of the resulting materials was investigated by XRD, BET, TGA/DTA, TPD of ammonia, FTIR, and TPR. Fe-ZrO₂ and Cu-ZrO₂ xerogels, with sulfuric acid introduced as the hydrolysis catalyst, mainly crystallyzed in the tetragonal phase and exhibited larger surface area and acid amount than those obtained with NH₄OH. Ammonia TPD shows that copper promoted sulfated zirconia is the most acidic material. TGA and FTIR reveal that under oxidizing conditions sulfated zirconia promoted with iron and copper retains more sulfate species than unpromoted sulfated zirconia. Regardless of the hydrolysis catalyst employed, copper promoted catalysts calcined at 600°C, contain a large fraction of copper oxide specieseasily reduced at low temperatures. These copper oxide species are believed to have different environment and interactions with the surface oxygen vacancies of the zirconia support. A FeO-like phase appears to be the most probable one after reduction of Fe-ZrO₂ catalysts prepared with NH₄OH as the hydrolysis catalyst. The formation of Fe° species may be hindered by the high dispersion and interaction of Fe²⁺ ions with the zirconia support. On the other hand, the reduction peaks of iron oxide and sulfate species exhibit a considerable overlap in the TPR profiles of sulfated Fe-ZrO₂ samples. Hence, the nature of the supported phase in the latter samples is rather uncertain.     

Hexacyanoferrate‐based ionic liquids as Fenton‐like catalysts for deep oxidative desulfurization of fuels

Two hexacyanoferrate‐based ionic liquids, [C₄Py]₃Fe(CN)₆ and [C₁₆Py]₃Fe(CN)₆, were synthesized and characterized using Fourier transform infrared and mass spectroscopies and CHN analysis. They were employed as Fenton‐like catalysts in extraction and catalytic oxidative desulfurization of model oil with dibenzothiophene (DBT), benzothiophene (BT), 4,6‐dimethyldibenzothiophene (4,6‐DMDBT), 4‐methyldibenzothiophene (4‐MDBT) and 3‐methylbenzothiophene (3‐MBT) as substrates. Various polar solvents, such as ionic liquids, water and organic solvents, were applied to choose a suitable extractant. The results showed the removal of DBT reached 97.1% with [C₄Py]₃Fe(CN)₆ as a catalyst and 1‐n‐octyl‐3‐methylimidazolium hexafluorophosphate ([C₈mim]PF₆) as an extractant under optimal conditions. The activity of sulfur removal followed the order DBT > 3‐MBT > BT > 4‐MDBT >4,6‐DMDBT. The effect of water content on sulfur removal was investigated by adding various concentrations of H₂O₂. It was found that excess water had a positive effect on sulfur removal but the catalysts were less sensitive than [FeCl₄^?]‐based catalysts to water. The mechanism was studied using electron spin‐resonance spectroscopy and gas chromatography–mass spectrometry. O₂^?? may be the active oxygen species in the catalytic oxidative desulfurization process and the oxidation products of various sulfur compounds were the corresponding sulfoxides and sulfones. Copyright © 2016 John Wiley & Sons, Ltd.     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.