Design Consideration for a Two-Distributed-Junction Tuning Circuit

We describe a novel method of designing a tuning circuit with two half-wave distributed junctions separated by a half-wavelength microstripline, which analytically determines the circuit parameters such as the minimum current density of the junctions and the characteristic impedances of the distributed junctions and the microstripline. The tuning circuit was approximated by simple transmission theory and then simplified with ideal circuit components for analysis. We applied Chebyshevs band-pass filter theory, in part, to optimize the circuit design. The analytical results revealed that a high characteristic-impedance ratio between the distributed junctions and the microstripline is necessary to obtain broadband matching using low-current-density junctions. The experimental results for all-NbN SIS mixers we designed with this method demonstrated double-sideband (DSB) receiver-noise temperatures of 6–10 quanta from 710 to 810 GHz for a mixer with a current density of only 4 kA/cm² (estimated C_JR_N product of 37 at 750 GHz). The RF bandwidth was broader than that of a conventional full-wave distributed SIS mixer with the same current density.     

Structure comparison between Th2Zn17-type and TbCu7-type Sm–Fe intermetallic compounds and their nitrides by means of 57Fe-Mössbauer spectroscopy

Samarium–iron intermetallic compounds were prepared by a melt spinning method with low and high wheel speeds, which resulted in a Th₂Zn₁₇-type and a TbCu₇-type structure, respectively. Structure comparison between these types was investigated for Sm–Fe intermetallic compounds and their nitrides by ⁵⁷Fe-Mössbauer spectroscopy.     

First-principles studies of electronic,optical,and mechanical properties of γ-Bi_2Sn_2O_7

The detailed theoretical studies of electronic,optical,and mechanical properties of γ-Bi_2Sn_2O_7 are carried out by using first-principle density functional theory calculations.Our calculated results indicate that γ-Bi_2Sn_2O_7 is the p-type semiconductor with an indirect band gap of about 2.72 e V.The flat electronic bands close to the valence band maximum are mainly composed of Bi-6s and O-2p states and play a key role in determining the electrical properties of γ-Bi_2Sn_2O_7.The calculated complex dielectric function and macroscopic optical constants including refractive index,extinction coefficient,absorption coefficients,reflectivity,and electron energy-loss function show that γ-Bi_2Sn_2O_7 is an excellent light absorbing material.The analysis on mechanical properties shows that γ-Bi_2Sn_2O_7 is mechanically stable and highly isotropic.     

使用PTB7作为阳极修饰层提高有机发光二极管的性能

采用poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b’]dithiophene-2,6-diyl][3-?uoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]](PTB7)作为有机发光二极管器件的阳极修饰层,制备了结构为indium tin oxide(ITO)/PTB7(不同浓度)/N,N’-Bis(naphthalen-1-yl)-N,N’-bis(phenyl)benzidine(NPB,40 nm)/8-hydroxyquinoline(Alq3,60 nm)/LiF(1 nm)/Al的系列器件,同时研究了不同浓度的PTB7对器件性能的影响.PTB7的最佳浓度为0.25 mg/mL,器件性能得到明显的改善,起亮电压为4.3 V.当驱动电压为14.6 V时,最大亮度为45800 cd/m2,最大电流效率为9.1 cd/A.与没有PTB7修饰的器件相比,其起亮电压降低了1.9 V,最高亮度提升了78.5%.器件性能提高归因于PTB7的插入使得空穴注入和传输能力大大改善.     

Li mobility in Li0.5 − xNaxLa0.5TiO3 perovskites (0 ≤ x ≤ 0.5): Influence of structural and compositional parameters

The dependence of Li mobility on structure and composition of Li_0.5 − xNa_xLa_0.5TiO₃ perovskites (0 ≤ x ≤  0.5) has been investigated by means of neutron diffraction, nuclear magnetic resonance and impedance spectroscopy. At 300 K, all samples display a rhombohedral superstructure (R-3c S.G.), where octahedra are out of phase tilted along [111] direction of the ideal cubic cell. The elimination of the octahedral tilting is responsible for the rhombohedral–cubic transformation, detected near 1000 K. In these perovskites, La and Na cations are randomly distributed in A sites, but Li ions are fourfold coordinated at unit cell faces of the cubic perovskite. Lithium conductivity, σ_300 K, decreases with the sodium content, decreasing from values typical of fast ionic conductors, 10^− 3 S/cm, to those of good insulators, 10^− 10 S/cm, when the interconnectivity between vacant A sites is lost (x > 0.3). In samples with x < 0.3, dc conductivity displays a non-Arrhenius behaviour, decreasing activation energy from ~ 0.37 to 0.25 eV when the sample is heated between 77 and 500 K. The temperature dependence of B_Li factors shows the existence of two regimes for Li motion. Below 373 K, Li ions remain partially located near square oxygen windows that connect contiguous A sites, but above 400 K, extended Li motions become dominant. The additional decrease of activation energy from 0.25 to 0.16 eV (low-temperature ⁷Li NMR value), should require the full elimination of octahedral tilting which is only produced above 1000 °C.     

Detecting cortical lesions in multiple sclerosis at 7 T using white matter signal attenuation

Cortical lesions have recently been a focus of multiple sclerosis (MS) MR research. In this study, we present a white matter signal attenuating sequence optimized for cortical lesion detection at 7 T. The feasibility of white matter attenuation (WHAT) for cortical lesion detection was determined by scanning eight patients (four relapsing/remitting MS, four secondary progressive MS) at 7 T. WHAT showed excellent gray matter-white matter contrast, and cortical lesions were hyperintense to the surrounding cortical gray matter, The sequence was then optimized for cortical lesion detection by determining the set of sequence parameters that produced the best gray matter-cortical lesion contrast in a 10-min scan. Despite the B1 inhomogeneities common at ultra-high field strengths, WHAT with an adiabatic inversion pulse showed good cortical lesion detection and would be a valuable component of clinical MS imaging protocols.     

Structural modifications of diamond like carbon films induced by MeV nitrogen ion irradiation

Diamond-like carbon (DLC) films were deposited on Si(1 0 0) substrates using plasma deposition technique. The deposited films were irradiated using 2 MeV N⁺ ions at fluences of 1×10¹⁴, 1×10¹⁵ and 5×10¹⁵ ions/cm². Samples have been characterized by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Analysis of Raman spectra shows a gradual shift of both D and G band peaks towards higher frequencies along with an increase of the intensity ratio, I(D)/I(G), with increasing ion fluence in irradiation. These results are consistent with an increase of sp² bonding. XPS results also show a monotonic increase of sp²/sp³ hybridization ratio with increasing ion fluence. Plan view TEM images show the formation of clusters in the irradiated DLC films. HRTEM micrographs from the samples irradiated at a fluence of 5×10¹⁵ ions/cm² show the lattice image with an average interplanar spacing of 0.34 nm, revealing that the clusters are graphite clusters. The crystallographic planes in these clusters are somewhat distorted compared to the perfect graphite structure.     

Improved synthesis of polyfluorinated l-lysine for 19F NMR-based screening

Polyfluorinated N-α-Fmoc--Boc-l-lysine represents the best-in-class among a set of polyfluorinated amino acids (PFAs) which are useful tools for ¹⁹F NMR-Based Screening. In this communication, optimized reaction conditions that allowed for the multi-gram preparation of this unnatural amino acid are reported.     

Characterization of self-assembled monolayers (SAMs) on silicon substrate comparative with polymer substrate for Escherichia coli O157:H7 detection

This article presents the characterization of two substrates, silicon and polymer coated with gold, that are functionalized by mixed self-assembled monolayers (SAMs) in order to efficiently immobilize the anti-Escherichia coli O157:H7 polyclonal purified antibody.A biosurface functionalized by SAMs (self-assembled monolayers) technique has been developed. Immobilization of goat anti-E. coli O157:H7 antibody was performed by covalently bonding of thiolate mixed self-assembled monolayers (SAMs) realized on two substrates: polymer coated with gold and silicon coated with gold. The F(ab′)₂ fragments of the antibodies have been used for eliminating nonspecific bindings between the Fc portions of antibodies and the Fc receptor on cells. The properties of the monolayers and the biofilm formatted with attached antibody molecules were analyzed at each step using infrared spectroscopy (FTIR-ATR), atomic force microscopy (AFM), scanning electron microscopy (SEM) and cyclic voltammetry (CV). In our study the gold-coated silicon substrates approach yielded the best results.These experimental results revealed the necessity to investigate each stage of the immobilization process taking into account in the same time the factors that influence the chemistry of the surface and the further interactions as well and also provide a solid basis for further studies aiming at elaborating sensitive and specific immunosensor or a microarray for the detection of E. coli O157:H7.