高速磁浮列车气动噪声分布规律研究

本文基于上海线高速磁浮列车现场噪声测试，结合数值仿真分析了磁浮列车行驶时的噪声特性以及气动噪声分布规律．数值仿真采用延时分离涡结合声比拟的方法，并对比现场测试噪声数据，给出了高速列车气动噪声特性以及噪声源分布规律．研究结果表明：列车行驶时噪声时程呈现很强脉冲性，频率小于100 Hz噪声主要来源于与高架桥梁结构振动相关的二次辐射噪声，特别是次声频段内，桥梁自振会产生显著的噪声．磁浮列车表面气动噪声分布规律与噪声频率相关，低频噪声与列车的车尾涡脱相关，高频噪声由车头边界层分离以及再附着、车身边界层流动等引起，而中频噪声主要产生于列车底部、抱轨与轨道梁表面相对运动作用．因此，高速磁浮列车除了要重点考虑车头、车尾的气动外形对气动噪声的影响外，还应考虑轨道间隙处气动噪声及其分布规律．     

A new non-divergence diffusion equation with variable exponent for multiplicative noise removal

A new kind of model based on double degenerate parabolic equation in nondivergence form is proposed for multiplicative noise removal. We first utilize the regularization method to illustrate the existence of the weak solution for the problem and the non-expansion of support of the solution is also provided. In the numerical aspect, experiments and comparisons with other denoising models are presented in order to state the denoising capability of our model.     

An averaging principle for stochastic switched systems with L é vy noise

In this paper, we present an averaging method for stochastic switched systems with L $é$ vy noise under non-Lipschitz condition. With the help of successive approximation method and Bihari's inequality, the existence and uniqueness of the solutions of original and averaged systems are proved. Then, under suitable assumptions, we show that the solution of stochastic switched system with L $é$ vy noise strongly converges to the solution of the corresponding averaged equation.     

Summary of ISO/TC 201 International Standard ISO 18516:2019 Surface chemical analysis—Determination of lateral resolution and sharpness in beam-based methods with a range from nanometres to micrometres and its implementation for imaging laboratory X-ray photoelectron spectrometers (XPS)

ISO 18516:2019 Surface chemical analysis—Determination of lateral resolution and sharpness in beam-based methods with a range from nanometres to micrometres revises ISO 18516:2006 Surface chemical analysis—Auger electron spectroscopy and X-ray photoelectron spectroscopy—Determination of lateral resolution. It implements three different methods delivering parameters useful to express the lateral resolution: (1) the straight edge method, (2) the narrow line method and (3) the grating method. The theoretical background of these methods is introduced in ISO/TR 19319:2013 Surface chemical analysis—Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods. The revised International Standard ISO 18516 delivers standardized procedures for the determination of the (1) effective lateral resolution by imaging of square-wave gratings, the (2) lateral resolution expressed as the parameter D_12–88 characterizing the steepness of the sigmoidal edge spread function (ESF) determined by imaging a straight edge and (3) the lateral resolution expressed as the full width of half maximum of the line spread function (LSF), w_LSF, determined by imaging a narrow line. The last method also delivers information on the shape of the LSF, which characterizes an individual imaging instrument. Finally, the implementation of all three standardized methods in the field of imaging laboratory X-ray photoelectron spectroscopy (XPS) is shortly presented. This part of the letter is based on the use of a new test sample developed at ETH Zurich, Switzerland. This test sample displays a micrometre scaled pattern motivated by the resolving power of recent imaging XPS instruments.     

State reduction theories,their classical analogs and some comments

Recently several theories have been proposed to account for the state reduction due to measurement. The resulting evolution is given by a new density matrix equation which suppresses linear superpositions of states with large spatial separations. We raise some pertinent questions regarding these theories. We also show that the evolution for the density matrix obtained in these theories has a classical analog.     

Active control of double-glazed windows. Part II: Feedback control

This paper describes an experimental investigation of an actively controlled double-glazed window. It is the second of two companion papers of which the first treated results obtained employing adaptive feedforward control. Herein, the outcome using adaptive feedback control is presented. This adaptive feedback controller has been tested in different configurations, i.e. fully and partially connected controllers. The differences between fully connected controllers with few filter coefficients and partially connected controllers with many filter coefficients are discussed. Additionally, tests with different traffic noise examples have been performed showing the ability of the actively controlled window to enhance protection against traffic noise.     

Noise levels on the shielded side in cities using a flat city model

The prediction of road traffic noise levels in areas not directly exposed, such as areas behind buildings and courtyards, is difficult using standardised methods. This is mainly due to the fact that traditionally only one or a few sources are included. Here a simple model that assumes a flat city on rigid ground is used to demonstrate that sources from a large area are important. Calculations are compared to measurements for four cases, and the proposed method predicts levels 6-10 dB too high for the equivalent level at all measurement positions. If a correction is applied for this over-estimation, the results agree well.     

A stochastic approach to Wilson loops

Wilson loops exp (i A (x) dx) are investigated in two-dimensional Euclidean space-time. The electromagnetic vector potential A is regarded as a generalized random field given by the stochastic partial differential equation A = F where is a first-order differential operator and F is white noise. We give a rigorous definition of Wilson loops and examine the properties of the N-loop Schwinger functions.     

12电极ECT测量电路设计

介绍了１２电极ＥＣＴ成像系统测量的原理及设计．研制了一种高频抗杂散电容的充电转换差分放大探测电路，并设计出与１２电极相配合、数据稳定、高分辨的一套控制时序，较好的实现了低漂移、高灵敏度及低噪声的测量．该测量电路可应用于最大成像率为１００帧／ｓ的系统